Having problems with your Digital Cameras ?

The installation of my evision123 dual mode camera is not completing. It stalls after you click on install. Why?


Answers :

Try restarting you computer and then going through with install. this happened to me after downloading and unziping the file. couldn't figure it out either then a power outage shutdown puter when i restarted it and tryed to istall it when through fine ... go figure.
\015\012
\015\012Just in case you still have problems ...
\015\012This is a link to a driver download for th eVision 123 digital camera that has worked for me running Win XP. Hope it helps. Once you download and unzip the file, restart your computer and go to the setup file to start. for some reason the setup file doesn't seem to want to run until you restart. after the software is installed it works great. see the description on the page for more details of what is included in this setup. hope it works good for you too. And remeber to pay good deeds forward, if you come across someone else who needs this driver offer them the same link. DON'T FORGET TO BACK IT UP TO CD!!!! LOL

http://members.driverguide.com/driver/detail.php?driverid=487395&si=74692cca4f88edc9c505da4bc4f6f4b4
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The installation of my evision123 dual mode camera is not completing. It stalls after you click on install. Why?


Try restarting you computer and then going through with install. this happened to me after downloading and unziping the file. couldn't figure it out either then a power outage shutdown puter when i restarted it and tryed to istall it when through fin ... Digital Cameras

Hi, I am an owner of a Kodak M340 camera. I bought this camera about a year ago and works perfectly. I recently went on vacation and took many pictures. I got home, plugged in the computer and tried to transfer the pictures to my computer. The software was already installed, so I just plugged in the computer and clicked on the button that said "transfer all". So the pictured were downloading and about 3 minutes later it said 100% complete. Once it was completed, I went to the album where the pic


You could try using a card reader instead of the camera and download the pics to a folder you create on your desktop. ... Digital Cameras

I can not install my dual mode usb camera gc -a33 because i don;t have the drivers to do it so i can;t use it as a web cam or dowloding photos from it .. please give me the drivers


Get it downloaded here :\012 ... > Camera & Foto > Digital camera">www.givemefile.net > ... > Camera & Foto > Digital camera\012\012www. ... JVC GC-A33 Digital Camera

My zoombrowser program will not recognize when my camera is attached to the computer with the supplied cord. The computer recognizes that a camera is found, but will not let the program recognize it. Lately, I've also been getting the note: invalid class string. Then I have to uninstall the complete canon program and install it all over again. Then the program works, but still says no camera found. And, the camera is set in the mode to load to the program.


Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Canon PowerShot A95 Digital Camera

I have a digital concepts dual mode digital camera. I've never used a digital camera before. It did not come with instructions or software. Could someone help me learn to use it, so that i can take pics of my kids. I don't even know how to use it on the computer. and no have drives to install in my pc...


There's very little difference in how you take a photo between digital and film cameras and simply getting out there and convincing your kids 10 thousand photos is "normal" will get you well on your way. Check out your local community education progr ... Digital Cameras

Hi i have a nikon coolpix L11 dg cam.. when i connect the camera to the comp.. i get a msg new hardware found... but later during the installation it says, drivers not found... and also i have downloaded the picture project cd completely on the system.. on picture project when i click transfer.. it shows not connected.. pls help me.. i have so many pics to transfer.


If you are using Windows 7 then that itself the problem. There is a work around though. You can remove the card from the camera and plug it into the card reader slot on your laptop so that you can just copy the pics like you do from a USB drive. Atle ... Nikon Coolpix L11 Digital Camera

Set up I cannot finish installation of the software because I get an error message that states an error code 1618x17x2951053040x. First, how can I complete the installation process and second, can I charge the battery in the camera using the USB port without completing the installation? I ask this because when I plug the charger into the port, no "ready/battery charging light" is on.Please help. Thank you.


The error that you have mentioned is related to a memory location so you might have a problem with the memory of the PC however I would try and boot the PC in directory service restore mode which is a protected mode in windows and try to install the ... Kodak Easyshare M753 Slim Digital Camera

I am unable to get my nikon coolpix l11 to install on my computer that has windows xp. I downloaded and installed nikon transfer 1.5.3 for windows and i installed it but nothing happens. I plug my camera into usb port on computer and nothing happens. when i choose to add hardware the computer does not find the camera. my camera has an sdisk in it. I also changed the camera to usb mode by going into the menu of the camera and choosing usb mode.


Consider NOT using the USB connection.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or ... Nikon Coolpix L11 Digital Camera

HI, I have nikon L110 and when i click pictures without flash in portrait mode and auto mode it takes long time to display on screen after clicking the pictures .. but when i use flash it comes quickly . Please help me with this,, whether there is some setting i overlooked. Thank you. H


It takes the same amount of time after the picture is taken for it to appear on the screen. Without flash there's less light and the camera requires more time to collect enough light and take the picture. ... Nikon Coolpix L110 Digital Camera

Aiptek dual mode camera intallation


... Aiptek PenCam Trio VGA Digital Camera

We insert a memory chip into our Kodak EasyShare C190 camera. The read-out informs us that the memory card requires formatting. We click on "OK." The camera goes into a "formatting" mode, then informs us that the memory card cannot be read. It goes back to the "Memory card requires formatting" prompt, we click on "OK," it goes back into the "formatting" mode, then tells us again that the memory card cannot be read. We can't do anything else with the camera until we take the chip out, then we hav


Your camera is only supporting SD/MMC Cards (up to 2 GB) and KODAK SDHC Cards (up to 8 GB). \015\012The card that you currently have might be faulty. Please try another card.You might also need to switch the camera over to saving pictures ... Kodak Easyshare C190 12MP Digital Camera with 5x Optical Zoom and 2.7-inch LCD

I have asony cybershot DSC W290, It's working fine but I can't click the photographs using the clicking button, it clicks the photographs through smile capture mode though it has no other problem except this I cant use its manual clicking button...evety time i press it, it shows a sign of a hand with an exclamation i.e. "<hand sign>!"


You seem to have it set to use the smile recognition to fire the shutter. Find this feature in the menues and turn it off. ... Sony Cyber-shot W290 Digital Camera

Installation problem When I am going to install Chameleon Digital camera in my Windows XP SP2 the system automatically reboots and the installation process does not complete and the system asks for installation again which results rebooting again. What should be the probable solution. It works with Windows98 perfectly.


Check the drivers here you may need the update\015\012\015\012There is one Chameleon Mega link on the page it appears to be the driver (no Vista Driver),There is a user guide and a setup guide on the far right. ... Largan Chameleon Mega Digital Camera

I have a sony handycam dcr-TRV70 and I have installed the the installation disk ver.1.5 image mixer and winASPI for win XP. I HAVE winXP,sp3.When i turn on the cam selector switch to VCR,WINxp "FOUND NEW HARDWARE" APPEARS but it doesn't recognize or complete installation since it can not find file:sony dv-vcr then it aborts and error message:can not install".I have the i-link IEEE 1395 CABLE CONNECTED BETWEEN THE CAM AND THE COMPUTER.i recently HAD A COMPUTER CRASH AND RESTORED-IMAGED to THE A


Http://www.tomshardware.com/forum/53160-5-vista-sony-handycam-firewire-problem\012\012\012When you downloaded SON ... Digital Cameras

I have had my Philips webcam for 2 years. My son gave it to me and he installed it. I was not very up on these things and I have used it for 2 years without a problem. a couple of months ago I had a virus on my computer and we had to complete un load it and my daughter reinstalled everything but the cam. Because I didn't install it in the first place I had no installing dist or any other information to reinstall without a disc. I need to know who can help me install without a disc.


Http://www.p4c.philips.com/files/d/dmvc300k_00/dmvc300k_00_dxp_eng.zipdownload and install it.. ... Digital Cameras

HP E327 camera is not responding when usb cable is connected. My WIA is stared and working, but nothing will read that my camera is connected, neither in Windows or Picasa or Photosmart Essential. When I try to install the E327 camera disc it won't let me install saying something is missing to complete install. Haven't a clue.


Some files r not able to get copied from your camera installation disc so the installation does not get completed.u will have to download the necessary software online to get it installed properly. ... HP Digital Cameras

I had just completed downloading my pictures and movies from the camera unto a dics. as i always do, after i completed downloading, i delete the pictures from the camera. at the completion, the camera immediately posted a "reinsert memory stick" on the screen, with a "C:13:01" flashing in the background. i then took out the memory stick and reinserted it. after i the access mode, the camera immediately posted "reinsert memory stick" i also took out the battery, waited a few minutes and did the


Do you remember to use the "safely remove hardware" function when you disconnect? Most times, nothing goes wrong but it only takes once for your current problem to happen. My advice would be to reset the camera. The "reset"command can usually be foun ... Digital Cameras

I have a panasonic DMC-FX07 camera Whenever i go in the rewind mode it reads " read error please check the card" and whenever i go to click a photograph or a movie it reads "memory full" I cannot acsess my photagraphs already clicked on the camera and cannot click any new photographs. If the camera needs to be repaired please provide me with service numbers in mumbai(south mumbai/walkeshwar area) Thank you Kajal Vora


I have the same massage .. but my problem is that i lost my original m.card and i tried to but another one ...and this massage appear even if i tried to connect it to my pc it cannot read it if you have any Aida plz help..[email protected] ... Panasonic Digital Cameras

Ive reinstalled the software for the GearHead 535i and extracted it from the zip folder however, when I go to the control panel and select add new hardware it prompts me to either search for software or manually select, I select the driver I installed from my files and click search/install but the installation wizard still says it cannot install my cam because no software was found. I need this to run, what do I do? whats wrong with it?


What I suspect is happening is this...the orginal Software was installed in a different folder/target than the zip files installed it. Control Panel may be looking in another location, even though you selected the driver. What I'm wondering is ... Digital Cameras

I was having trouble installing the drivers for my creative notebook camera(its a VF0250) and i downloaded the latest versions straight from the website. when i would plug it in it said "device not recognized" and would search for the drivers but never found them. until i manually had to find them. i went on device manager->right clicked properties then went to the driver tab and clicked update driver-> clicked imaging devices and found the creative webcam driver there. now atleast the webcam re


You probably installed the wrong driver by doing that ..and what you need to do is go to the support site ..and download and install the correct one ...the camera need to be identified and to say that the device is installed and ready to use in order ... Digital Cameras

FinePix A360 stuck in video mode - moving the slider to "play" or "photo" mode does nothing. I can record videos but can't take pictures. The slider doesn't feel like it's come loose at all; it's actually pretty sturdy and you can feel it clicking when moving to different modes. Any help will be greatly appreciated.


It doesn't run on rechargeable batteries? \015\012\015\012Sometimes if you run it with the USB cord, you can get some power that way. See if that works. ... Fuji FinePix A360 Digital Camera

Installing software When trying to install the kodak easyshare software onto my computer it gets to "file: Kodak EasyShare printer dock or photo printer", and just as it looks like it is about to complete this process, it stops. This has happened twice now. How can I get a successful installation?


When installing easyshare software\015\012\015\012during install wizard > choose custom install >\015\012\015\012change printer dock to "will not be installed" by clicking on the arrow on the right side\015\012 ... Kodak EasyShare One Digital Camera

I have all the softwares installed in my computer. I have downloaded images no of times. But its not happening now 1) Camera gets connected to computer 2) The window appear on the computer Where i click on ''canon camera window'' 3) CameraWindow displays on Computer & Direct Transfer Menu appears on Camera 4) i click on ''New Images'' on camera, its not transferring If i click on ''Transfer untransferred images'' on Camerawindow on computer, it says ''Folder not found'' what should i do?


Find out where "Canon Camera Window" points to for its default pictures Folder and change that path or create a Folder in the location where it is pointing to ...It seems to be directing the pictures to a non-existing Folder ! ... Canon Digital IXUS 860 IS - Digital camera - compact - 8.0 Mpix - optical zoom: 3.8 x - supported me

The flash no longer works. In "auto" and in either the "auto flash" mode or "forced flash" mode no flash occurs. It is not in "suppressed flash" in the "portrait" screen position mode. The batteries are good. The shutter button is pressed after the charging is completed. The camera is not in "continuous shooting."


Hi there, \012Well first of all try to reset your camera, remove the battery from your camera for 4 hours and then insert them again, it helps you to do a hard reset in your camera. if further you have the same problem then there mus ... Fuji FinePix 3800 Digital Camera

A630 clicks and wont take picture. Stays in preview mode.


Do you mean you are expecting it to show the photo that you just took for a few seconds before it goes back to preview mode? There's a menu setting which I think is called "Picture Review" and you can set it for something like 0, 2 seconds, 5 seconds ... Canon PowerShot A630 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1322 seconds