Having problems with your Digital Cameras ?

When I try to download from my camera the picture gets huge then it does nothing, none of the sites will pop up. I have tried reinstalling the software but it still does not work...any suggestions?


Answers :

You didn't indicate the model of your camera or computer.  Knowing that along with the amount of memory in your computer would help with questions like this.\015\012
You are probably running out of memory.  The simplest solution might be to invest in a card reader (if you don't have one) and copy the images directly from the camera's flash memory card to the computer disk directly.\015\012
\015\012Barring that, if you have enough space on your disk, you could increase the amount of virtual memory, that involves going into the control panel / system / advanced / performance / advanced / virtual memory and try doubling the amount of space used for virtual memory (initial and max).
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a EOS 2D Mark II & I can't get all of the functions of the EOS Utility software to work. My computer (windows 7 (64 bit) recognizes the camera but when the utility software opens all but one of the options is not grayed out. I tried reinstalling the software but still have the same issue. Hence, I can't adjust any camera settings or view any photos. I want to use the teathered capture & remote triggering options available but can't. The manual suggest that I connect using the IEEE 1394


I don't see the problem with finding a Firewire cable as they are pretty standard, though I am having trouble finding references to a Canon model EOS 2D. Canon don't seem to have heard of it.Firewire is usually a feature of digital video ... Canon EOS-1D Mark II Digital Camera

When I try to download from my camera the picture gets huge then it does nothing, none of the sites will pop up. I have tried reinstalling the software but it still does not work...any suggestions?


You didn't indicate the model of your camera or computer.  Knowing that along with the amount of memory in your computer would help with questions like this.\015\012You are probably running out of memory.  The simplest solution might ... Digital Cameras

Software Upgrade I received a notification to upgrade my EasyShare Software. I selected the upgrade and near the end of the upgrade I received a message stating something about the Windows logo not be correct. Now I cannot download any photos from my camera. I removed EasyShare Software and tried reinstalling. It still does not work. Please tell me how to correct the problem. Thanks!


This error message indicates that the drivers are not digitally signed by Microsoft. In the event that you receive the error message referenced above, ple ... Kodak EasyShare Z7590 Digital Camera

My Canon Powershot G3 will not respond. When I turn it on a get a rapidly flashing green light on the back, and when I try to connect I get the message on the computer that there is no supporting software. To try to reinstall the software on the camera I uninstalled the Canon software, reinstalled it, and then connected the camera, hoping that the software would reinstall whatever was corrupted or missing. Do you know what is going on? Paul Luyben


... Canon Digital Cameras

Communication error i can take pictures and it stores on the camera but when i try to upload them it says communication error. i saw someone had the same problem but when i clicked on the link it could not be found. i also reinstalled my software and it still did not work.


Try NOT connecting your camera to your computer. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or ... Fuji FinePix Z10fd Digital Camera

My canon ixus 860 is is a year old. Donloads have worked perfectly up until now, using the canon browser. Now, suddenly, when I connect it to the HP laptop for downloading pictures, it says that the camera is not connected and to retry. Have tried several times but it is not working. Have uninstalled and reinstalled the software, as well. Your suggestions on how to solve this are appreciated. Kind regards, MJB


Hi there,There is a way -You need to restore your operating system to a back point.If you are using Windows XP than follow the below link to restore it -http://www.microsoft.com/windowsxp/using/helpandsupport/getst ... Digital Cameras

I just got a Panasonic SDR-H40 that comes with Videocam suite 1.0. The software crashes continually every time I try to edit my video. I had Windows XP service pack 3. I deleted it. Reinstalled Videocam Suite and it still crashes. Its ****. Any advice?


Has anyone contacted Panasonic? ... Digital Cameras

Canon Vixia HSF100 - I've successfully transferred video files in the past, and have just transferred photos from camera to computer without problem - but when I try to transfer video files I get the message -'can't find any files to transfer to the computer'. This happens repeatedly, I have already reinstalled the software. The removable disk shows approx 6gb of files, but the computer does not recognise them. Any suggestions?


Hi!I read your corresponding posts and it seems to me that the problem you have is related to the USB mode of the camera.Make sure that when you connect the camera to the computer, you set it to PC/PRINTER mode!If that fails t ... Digital Cameras

When I connect the Samsung s860 digital camera to my Macbook Pro the computer does not connect/recognize it. I tried opening the Window's drive portion of my macbook and still no recognition of the camera. I also opened I photo to try to import-- can't find the camera. I installed the Samsung software on the Windows side of my mac, opened the software, but still the software cannot find the camera. It acts as though the camera is not even connecting to the computer... but the cable is good and t


Do what the pros do...use a card reader to download to a folder you create on your desktop. ... Samsung S860 Digital Camera

Reinstalling software When I try to open the Olympus software, I get a message the serial number is missing and I have to reinstall the program. I cannot find a built-in uninstall utility. When I try to delete the folder "Olympus," I'm told it can't be done because a file is being used somewhere. I can't install over the old program and it cancels itself. What should I do? Thank you for your help!


Close down the computer.\015\012Reboot the computer go to Control panel Add/delete software - find the Olympus file and click delete.\015\012When done do not re install, but put the CD back in the box, Windows does very well without it.\015\012If y ... Olympus FE-110 Digital Camera

Dear Support Manager, hello fix-ya guys, im having a problem,,i have a Nikon d2x cam and the software for win xp sp2 but i upgraded to windows 7, now im having trouble locating the drivers my Nikon capture software is working but it is not recognizing the cam, if i check my computer the cam showed up there and i can copy the contents but the Nikon software still dose not recognize, also i tried running the software in compatibility mode but still no go,,,HELP PLEASE have an excellent day Fal


Hi\015\012You can get latest drivers from HERE ... Nikon D2X Digital Camera

Dear Support Manager, hello fix-ya guys, im having a problem,,i have a Nikon d2x cam and the software for win xp sp2 but i upgraded to windows 7, now im having trouble locating the drivers my Nikon capture software is working but it is not recognizing the cam, if i check my computer the cam showed up there and i can copy the contents but the Nikon software still dose not recognize, also i tried running the software in compatibility mode but still no go,,,HELP PLEASE have an excellent day Fal


Please get it downloaded at :\012\012www.nikonusa.com/Service.../index.page\012\012 ... Nikon D2X Digital Camera

DMC-FZ18...unable to download photos off card....have loaded software . taken out other photo software , still unable to download .. Do everything right up to where it says prepare for aquisition ..yes...unit';s coming up unable to download ...tried to just view photos and coming up..no photos...Have tried with anmother card that I downloaded on my previous camera . It wouldn't download .. Frien has tried in their computer .cant' access photos. Had the little brother of this one x12..it was so


Have you tried Picasa? Free from Google. Does your PC see it as a drive? Are there proprietary drivers for the camera? Try using a USB hub instead of the USB ports on the PC. ... Digital Cameras

I dropped my canon rebel xsi from about 7feet, but it still took pictures after i checked it. nothing cracked, not the lense, or the screen. but than about an hour later, when i tried taking pictures it said error 99. i took of the lense and tried cleaning it inside, and when i put it back on it still said error 99. it says shooting is not possible. turn the power switch to off and on again, or reinstall the battery. i did those, but the error 99 keeps poping up. i dont know what to do?


It could be several problems. One is a bad contact between lens and camera body, clean the contacts , check for damage and try another lens if you have one. Try another memory card. Another problem could be with the shutter which would need the camer ... Digital Cameras

My Canon ixus55 was downloading from camera to computer with no hassles and then stopped all of a sudden? Done nothing different I use the canon zoombrowser program provided by canon for download. I tried uninstalling and then reinstalling the software now that does not fully install as well. Any assistance is much appreciated. I had this issue earlier this year after I had a windows update done so had to reinstall the camera software and then it worked but that s a huge job and no window update


... Digital Cameras

I have tried all of the suggested items even changing the batteries to the new Energizer Lithium batteries and I still have a dead camera. Do you have any more suggestions that I may try? Thank You


It sounds as if you are addressing a specific person with this problem have you chatted with someone about this problem before? No matter I guess. New rechargeable batteries "normally" require recharging when you first buy them for about 2 hours some ... HP Photosmart M22 Digital Camera

Camera locked Hi, I've got the blinking battery symbol when I switch on my K100D. I've tried switching to manual focus and leaving for a while with the batteries out, but still the same issue. It works ok with external power supply, so I uploaded ver 1.02 firmware to see if that would solve the issue but still the same fault. Is there anything else you can suggest I try? Thanks, Brian


Put in new batteries. If you're using rechargeable batteries, they already have a lower voltage than regular batteries. If you don't have enough milliamps in the battery, it will show as low, no matter what the voltage is. ... Pentax K100D Digital Camera

E18? Hi, folks!  I have an old Canon PowerShop s100 that displays the message "E18" when I try to turn it on.  Thoughts?  I'm going abroad tomorrow and really need a working camera!! Less pressingly, I no longer have the software that came with the camera, and I have a new Dell with Vista. I've been trying to download photos off my camera, but when I attach the camera to the computer, I'm asked to install driver software that I don't have.  Can you suggest a site to download Vista-compatible dri


E18 means that the lense is not coming out all the way it is a internal error it is going to have to be taken apart and the internal workings cleaned. for drivers sorry have know idea. ... Canon PowerShot S100 Digital Camera

Hey wiz Thank u 4 trying taht still didnt do the trick it is still kicking off,any more suggestions i am on a very low fixed income a friend gave me the camera and i took alot of pics of my 4mnth old daughter and they have all disapered .Iam making her a memorybok& scrapbook i dont have the $ 2 take it to a repair shop so i will try anything thanks again


Hello!!! Copy the photos using the memory card reader!!! ... Vivitar ViviCam 3750 Digital Camera

Does Canon have a problem with their software? When I try to download photos the camera is recognized by the software but then the window does not provide software available to download, even though I have downloaded tons of photos prior to this problem. The computer was sent to the shop and the Canon software was uninstalled and then reinstalled. The tech cleaned up some other issues, but is at a loss to figure out why the software will not download photos. We have spent litteraly hours on this


Did you try reading the card with a card reader. The camera's card reader slot is very sensitive to file system changes and this is probably the reason why its not able to download. Inset the card into your laptop's card reader and see if it reads th ... Canon PowerShot SD790 IS Digital Camera

When I tried to turn on my Canon Powershot (SD880 IS) this evening the lens extended only about half way and the screen remained blank. When I tried to turn it off the lens did not retract fully, and the screen is still blank. I have tried removing and recharging the battery, but it makes no difference. Any suggestions are welcome.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon Digital Cameras

I'm no longer able to download images from my IXUS 75 camera to the computer. While trying I'm getting the message "cannot detect camera. Check the connection and try again." I have tried uninstalling the Cannon software and installed an updated version as suggested by Cannon, but without success. Everything worked find up until this summer. My computer is applying Windows Vista.


Even without the software, you can still download your image files from the camera to the computer. While the camera is plugged into the computer thru the usb cable, turn on your camera from there. Right click on the Windows Start button and choose ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Ive reinstalled the software for the GearHead 535i and extracted it from the zip folder however, when I go to the control panel and select add new hardware it prompts me to either search for software or manually select, I select the driver I installed from my files and click search/install but the installation wizard still says it cannot install my cam because no software was found. I need this to run, what do I do? whats wrong with it?


What I suspect is happening is this...the orginal Software was installed in a different folder/target than the zip files installed it. Control Panel may be looking in another location, even though you selected the driver. What I'm wondering is ... Digital Cameras

Please help!! When i try to turn on my camera the screen turns red and it sais camera has experienced an error please reset your camera, then it automatically turns off. My model is HP Photosmart R725/R727. What can i do about this problem i tried EVERYTHING!? I even tried the whole put an end of a paper clip in the reset hole next to the battery but that still didnt work! I really dont know what to do next.. ANY SUGGESTIONS???


Just gently smack it a couple of times. I swear, it soounds strange but it works!! Read some of the other solutions on this site and you'll see. Besides, there is nothing to lose at this point! ... HP Photosmart R725 Digital Camera

I am trying to reconnect my camera to my computer without disks,so that I can download my pictures.I have tried add and remove hardware, it says it's functional, so I tried removing it and reinstalling, no luck there. If you have any suggestions I sure would appreciate them. Thank you


Try updating the drivers for your model camera. You can probably still download them from Sony's site.After that, open your device manager (control panel;system; hardware;) and hit update drivers. ... Sony Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2080 seconds