Having problems with your Digital Cameras ?

Tried to down load pictures from my new A630 to my existing Cannon utilities program. The program would not open. I then took the new Solutions disk and installed the programs. /when the installation was complete I tried to down load the pictures again. When I attemted to down load I got an error message the Zb Module had encountered a problem and had to close. I got the same response when I tried to open the Zoom browser. I tried from the shortcut and by going direct to the programs.



Answers :

SteveJudy,
Uninstall all utilities related to the Camera in question (via add/remove programs within control panel), re boot, and install the utility from the disk that came with your new A630 and give it another try.
Good luck.
This is not a big problem sri

just reinstall the zoom browser
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Tried to down load pictures from my new A630 to my existing Cannon utilities program. The program would not open. I then took the new Solutions disk and installed the programs. /when the installation was complete I tried to down load the pictures again. When I attemted to down load I got an error message the Zb Module had encountered a problem and had to close. I got the same response when I tried to open the Zoom browser. I tried from the shortcut and by going direct to the programs.


SteveJudy, Uninstall all utilities related to the Camera in question (via add/remove programs within control panel), re boot, and install the utility from the disk that came with your new A630 and give it another try.Good luck. ... Digital Cameras

I have a HP M525 camera, Seerial No. CNGBUQ30Z4. Recently, when trying to transfer some up-loaded picturs (from the camera to the computer)the screen went blank. When I tried to restart the process by clicking on the icond on the desktop, it would not open and turn on the Photosmart part of the program. And, now, I an not able to transfer the new pictures from the camera to the computer so that I can process them like put then in a Word file, etc. What should, can I do to resolve this proble


Hi,\015\012The possible solution's are \015\0121 . First uninstall the photosmart software from the system and reinstall the software once again . Install in C: drive and then connect usb and transfer photos this will work . If this doesn ... Digital Cameras

Whats wrong? I Owen one Olympus u-700. i have got it f?r two years. It has work perfect since too two month ago. On some pictures when am look att them in my camera. Then they look normal. And when i starded to transfer them too my computer. Then they started too become verry small. If i try too open them i any program they open up as double p I own one Olympus u-700. i have got it f?r two years. It has work perfect since too two month ago. On some pictures when am look att them in my camera. Th


1) Reset the camera2) Turn it off and remove the batteries.3) Try to turn it back on without the batteries, to drain any residual energy within the internal capacitors.4) Check the battery terminals for any dirt or co ... Olympus Stylus 700 / 700 Digital Camera

Just bought a new Fujifilm Camera model S1800. I get an I/O error when trying to download the pictures from the camera using the Finepix program. I reloaded the program and got the same problem. I have no problem downloading the pictures using the Windows Picture Gallery program so it must be the Finepix p[rogram??


If you really want to use the Finepix program and you've been to the support section of the Fuji website to download any software updates, then I suggest you get a card reader and download the pics to a folder you create on your desktop. Once there, ... Fuji Digital Cameras

Format xd card error I bought new Fugifilm xD-Picture card, 1 GB, and putit in camera. Brought up format screen and attempted to format. All I got was "card error!". I thought the problem might be the brand. So, I bought an Olymous xD-Picture card, 1 GB, loaded it into the camera. Attempts to take a picture resulted in "card error!" so I tried to format, with the same result - "card error!'.


Try formatting the card on your pc, connect the card to a card reader, open my computer find the card, right click format, try standard fat first and format. if that doesn't work try Fat 32. ... Olympus Camedia C-350 Digital Camera

I just bought a 1.5 inch digital photot frame and i get the program loaded up but i can only get 26 out of like 125 pictures that it should hold. it says that it cannot open the system clipboard when i try to add more pictures


Those photo frames typically say "up to 125 photos" Their capacity is in megabytes, not numbers. If you have very high resolution photos, they are large files and will fill the memory much faster. Look in the documentation that came with the unit t ... Digital Cameras

I have been downloading my pictures from my camera as described in SP-550UZ manual with absolutely no problem. Its been about two months and today I tried and it does nothing! I opened OLYMPUS MASTER 2 and tried to down load as found in the browser bar. Its says not connected to the camera. Batteries are new and camera works. What is wrong? Barbara Savoia [email protected]


Blame Microsoft updates. Use a card reader to download your pics to a folder you create on your desktop. ... Olympus Camedia C-350 Digital Camera

I have a Brand new camera, the cannon SD880.. I just got back from vacation and as I opened my camera it said memory card error, I then clicked the button to view my pictures and it said memory card us locked. ( It was unlocked though) I took the memory card out and it was unlocked... I tried downloading them onto my computer and It read no photos. I am very worried that they are gone, which would make no sense, is their anyway to fix this? how can I recover this problem thanks


It sounds like you've got a troublesome memory card problem. \012 If you really want to regain your photos there, I would like recommend you to try a photo recovery freeware that can restore all your inaccessible photos back for free: ... Canon PowerShot SD880 IS / Digital IXUS 870 IS Digital Camera

I got a new Kodak memory card for my C743 Easy Share, but the pictures I've taken do not show up on the card when I try to use the Easy Share program


Try to format your memory card ... Kodak EasyShare C340 Digital Camera

I had a Canon powershot A1000 IS, but it broke (the lens would not retract) so I purchased a powershot SD 1300 IS. I have installed the CD that came with the new camera into my computer.(Windows XP). Now, here's the problem, when I try to download my pictures from the camera onto the computer, AND I have followed the step by step directions, but the camera window would not open up, so had to click start menu, all programs, camera utilites, camera window, camera window. The camera window was


Hello,Almost all cameras now have the plug and play functionality which acts like a USB Flash drive. What you can do is to check the camera under My Computer. It should show up under that list and you should be able to copy the files from ... Digital Cameras

I just recently got a new computer, I downloaded the Kodak EasyShare program, now I'm trying to upload my pictures from my camera to the computer,and it says 'Installing Device' then it says 'Device was not successfully installed'. It gives me no instruction about how to get it to Install successfully or why it wouldn't install. I have a Kodak EasyShare C813 camera. Please help! Thanks!


Consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to th ... Kodak Easyshare C813 Digital Camera

"Unidentified Image" I took a bunch of pictures and now about 15 of them say "Corrupted Data" when I go to view them. A few of them say "Unidentified Image" and I can still view the picture. When I loaded them all on my PC, those that say "corrupted Data" or "Unidentified Image" loaded, but no program will open them. Even the ones that I am still able to view the picture. I believe all these pictures are my close up shots, too. Hmmmm... is there any solution to being able to open these pics


After your memory card recovery software has successfully retrieved your images either try reformatting on a low level format and or burn your SD card and buy a new one. A few bucks on a new card should save much angst at lost or corrupted images. ... Canon PowerShot S3 IS Digital Camera

I have a Gateway computer with Vista program on it. I have been able to load my pictures from myCX7310 Kodak until now. I don't see a way to do it now. There are no directions as to what happened to adding pictures. Some thing seemed to have disappeared. Is it the Vista program ? How do I load my new pictures? Thanks. Evelyn Connelly


Try connecting the camera to a diffrent usb port and it should recognise the Camera atthat point of time u can click on start goto computer and in computer u will see a removable disk option u can download the pictures from there if it doesnt show up ... Digital Cameras

Pink pictures the other day.... I was using my camera and it started showing lines through the image, the image quality was getting worse and worse.  I figured needs new batteries.  So I put new batteries in it and now it takes pink pictures!  How strange my evergreen pictures look in fushia color!   I tried and tried for a couple of weeks, I checked all the settings, even took the batteries out and restarted, but still pink!  all shades of pink!  Here's where it really gets odd, I got my camera


Hi all -- This is a physical problem with the way the lens is seated. I didn't figure this out myself; I was told it by a camera repair shop guy who also owned a 945 and had the same problem. Basicly, you adjust the lens, relative to the body, by d ... HP Photosmart 945 Digital Camera

Pictures are not loaded to my Mac/PC I am unable to load the pictures from the memory card my new TZ10. I have loaded pictures from the card once and then all functioned well on my Powerbook. This time I have tried both Mac and PC with no luck on either of them. All the pictures are visible on the cameras screen. And yes, the function wheel on top of the camera has been in the right position.


First of all, always remember to "eject" your equipment on a Mac and use "safely remove hardware" on a PC when you disconnect to avoid corrupting the camera. To avoid problems in the future, do what the pros do...use a separate card reader like the o ... Panasonic DMCZS7DMCTZ10 Digital Camera

Hi. My Fujifilm Finepixd S1800 camera has been acting up lately. When I try to take a picture, the camera takes several seconds to actually take it, the top light blinks yellow. I have brand new batteries in and they are all positioned correctly. Also, when I try to access my pictures, it has a loading screen but does not load. Please help as soon as possible. Thank you.


Your camera takes a sizable image which could be part of the problem loading it to the card it takes a long second or two. You also may be using a shooting mode that requires a long shutter speed and have the "noise reduction" activated in this case ... Fuji FinePix S7000 Digital Camera

My 6 year old cannon powerShot70 won't take pictures, when power up the view in the LCd is black with hazy streaks, shutter clicks and "picture" shows up in view mode the same as LCD screen view. Camera turns on and I can view prev pictures but cannot shot new ones. iused camera outside for about 45 minutes at 2 degrees celius, got great pics but when i tried it one day later got black LCD. HELP!


This is hardware problem you need to bring your camera for service you can this link:http://www.advancecamera.com/repair/\015\012 ... Digital Cameras

My camera is a new purple polaroid 1834, I got it for Christmas. I tried to take a picture the other day and it took one, and then shut down with the lens still out. It will not turn on, and everytime I press the power button a green light flashes and it beeps three times, but nothing else happens. I have tried replacing the batteries with brand new ones..still nothing. I've tried to batteries and everything.What is going on and what can I do to fix it? Is it fixable?


It is fixable but best thing to do is take it back to where you got it for a replacement. Or send it in to Polaroid the lens gears are stuck and the zoom motor sounds like it has gone out. If you have no sucess doing that then let me kno ... Digital Cameras

Tried cleaning my Sony gv-d200 vcr with a new Dynex® - 8mm Head Cleaner Model: DX-DA100511 it didn't work. It just got jamed, and would not load. After 3-1/2 hour I got it out. Went back to the store and got a new one. Same thing. I looked for a Sony 8mm Head cleaner Model v8-25cld, but their hard to find. Is there another head cleaner that will do the job?


... Digital Cameras

My son got a vivitar vs18b camera. The packaging says Mac compatible but when we put the image zone disk in nothing happens. I've tried clicking on the 2 files after opening the disk icon and nothing happens. I tried the Vivitar Website and found no solutions. One spot had to download the "experience software". I got a link to a blank page. Any ideas how to get the pictures from the camera to our Mac?


Try to get your money back for the camera. If not, go buy your son a better camera. Vivitar has no drivers for anything. Only what comes with the camera (WinXP only). Plus the viewfinder is junk, and the camera loses all store pictures when the b ... Digital Cameras

My samsung nv24hd has had its lens stuck open, so I got it to closed carefully. Now whenever I try to turn on my camera, the lens will not open. The screen says samsung, and it freezes. I am able to see the pictures and videos on my camera, but I can't take pictures. It either beeps 3 times, or it freezes with the samsung logo on the screen. Is there anything I can do?


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Digital Cameras

Canon rebel xt eos shows ERR CF. What do I do now?I tried a new flash card but still got the same error message. When I try to preview pictures I have already taken the screen says ¨no image¨. My camera worked for a couple of pictures at one point following this initial error message and then acted up again, showing err 02. It then quickly reverted back to old error CF message.


Check that the pins in the camera that connect to the CF card are clean and not bent. You will probably need a good light and a magnifying glass to see into the card slot. If you can see a pin that is bent you could try straigtening it. BEWARE- turn ... Canon Rebel XT / EOS 350D Digital Camera

I have a new laptop that has vista on it. In the past I have used a desktop with no problems it used windows xp. I have installed software for my digital canon rebel xt and can go to those programs. When I connect my camera to download pictures I get the message "Found New Hardware". When I try to manually go to zoombrowser ex it will not allow me to download pictures. HELP


... Canon Digital Cameras

Digital camera I've got this digital cam SAMSUNG L100..when the memory is in the cam I can fully see the pictures but when i've tried to connect the usb to download pictures, it wont show anything..it said the memory has been protected I dont how to open it.. please try to help me


Personally i never connect the cam to pc using the usb cable, i take the memory card out and put it in an sd card usb adapter, you say the images are protected, this tells me that you have the lock switch activated on the sd card...hope this helps :) ... Samsung L100 Digital Camera

Ok. I got a Vivatar 5022 vivacam digital camera for Christmas. And I was trying to open the package and accidently cut to deep and a piece of the end of the image manger cd got cut off. Well, I tried to download it anyways on my pc and it worked fine exept in the end when I went to launch it it had a big black ex and when I went to scan my pc it automatically closed on me. And happened every time. Well, I either need a new cd or a url to where I can download it. The cd says - Vivitar Experience


Http://vivitar.com/products#Digital Cameras/25/310/Software Download ... Vivitar ViviCam 5022 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3348 seconds