Having problems with your Digital Cameras ?

Lately my E520 camera is only working on "auto" mode. When I switch the camera to any other mode the shutter button does not release. As a result I am only able to shoot in auto mode. Please advise.

Answers :

Hi there,\012

\015\012\015\012First of all I suggest you to reset the camera; remove the\015\012battery from camera for 10 minutes and try again.

Good Luck!!
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lately my E520 camera is only working on "auto" mode. When I switch the camera to any other mode the shutter button does not release. As a result I am only able to shoot in auto mode. Please advise.


Nikon D40 pictures taken but too dark even in AUTO mode with flash on a bright day. also, some days ago I had the Shutter release error message while taking some photos. After that, the camera is acting weird, pictures sometimes are taken but the picture is always dark, although flash is used and AUTO mode selected. I do not see the error message anymore, but the camera simply do not take pictures properly. I tried formatting, etc with no result.

Make sure flash is on your flash on cam is sticking. ... Nikon D40 Digital Camera with G-II 18-55mm Lens

My Fuji s2000 always shoots picture that are blured. I have tried many settings and different exposures however I keep getting the same result. What can I do ? The worst mode on this camera is the auto mode, I can never get a clear indoor picture. This camera takes beautiful pictures of flowers/nature and all outdoor photo's turn out beautiful it is the indoor photo's I have even tried the sports mode for when people move but I still get a very blured image

Found the same thing and I think the answer is the opposite of previous suggestions. The s2000 is truly awful at anything above about 400ASA The degree of pixel binning it uses just makes the pictures look terrible. Force the camera to use 400 or s ... Fuji FinePix S2000hd Digital Camera

Hi, I have a Canon Powershot A700 digital camera and I am facing a problem with it. The 'Mode Switch' button, which changes the mode from Shoot/Record mode to Play/View mode is not working. Irrespective of whether the button is up or down it is in Shoot mode only. I am not able to download pictures to my PC as I cannot switch the mode to Play/View mode. Seems like a hardware problem. Can you please advise and help? Regards, Rohit Bajaj

If you have the manual for this camera turn to page 15.This tells you how to switch between Shooting Mode and Playback Mode.This is achieved simply by pressing the DISP button.This button is located below and to the left of the FUNC ... Canon PowerShot A700 Digital Camera

I am not able to shoot with my canon 350d using the shutter release or the clicking button. All that is happening is that when I switch on, it just keeps shooting and when I try to use the shutter release nothing is really happening. what should I do. I have tried to reset the camera but I have yielded nothing. Help please.

Remove the battery and memory card, press and hold power for 60 seconds to remove residual voltage and reset the processor, if there is no change a camera repair shop is the next stage for assessment. ... Canon Rebel XT / EOS 350D Digital Camera

Been shooting with my Pentax *IST DL on “AUTO PICT” and “AF” for the last few weeks with no problem. (with and without the flash.) As of yesterday however, anything I shoot is coming out dark. Even with the use of the flash on a subject 3 or 4 feet away (still in auto mode) photos are still dark. Please Help! Is my camera dying? Thank You :)

I am having the same problem after I got my CCD cleaned by someone. Can someone tell me where the factory restore setting is? I have looked but to no avail. Thanks. ... Pentax *ist DL Digital Camera

Rollei DP6200 Digital Camera 12m Dear Sir, Could you please help me with solution with above digital camera brand. When i switch to shooting mode the screen is black, and after i take the picture the result is blank as well, in preview . hoping to hear from you.

... Digital Cameras

Hi, I've just recieved my nikon d90 back from a repair and service, and although everything appears to be working fine, whenever I want to change shooting modes,( auto, P, M, flash off etc), they only work once I have selected them, and then turned the camera off and back on. In other words I cannot be shooting in the Auto mode and then switch to "flash off auto"....all that happens is that the auto focus works but the shutter will not operate. If I switch the camera off and on however, I can t

I'm going to assume at this point that the camera has been serviced correctly. What I'd suggest is that you look in your manual and find where you can reset your camera back to the factory default settings. Okay here are a few thoughts that might be ... Nikon D90 Digital Camera with 18-105mm lens

I have canon a640 camera. I am getting problem regarding taking pictures as the flash is not working. I have tried it on Auto mode, Portrate, landscape and others the result is same. Please help me in this regard.

Make sure the dial at the top of the camera is set to AUTO or the green camera icon. When you are in position to take a picture, press the left button on the circle pad on the back of the camera; it should look like a SQUIGGLY ARROW this is the sign ... Canon PowerShot A640 Digital Camera

Canon EOS rebel XS is not releasing shutter in AF mode of the lense. If I make the MF mode in the Lense, it releases the shutter. I have updated the firmware to 1.06 still I am getting the problem. I have also set the focus locking in the camera, but no result. Is it a problem with Lenses or Flash Memory or camera? Pls. help with the solution.

... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

I can not get the auto flash to work The screen shows on the left: iso auto, a box, M1 on the right the flash symbol A, auto, steady hand symbol, 1375 I try to take a picture and the camera won't take unless I turn off the flash. I have tried to change many settings in the function area, but I can not figure out what I accidentally changed in the first place. please help me to get my camera to work in the auto mode again

I have this same exact problem. When you say "repair it," how? ... Canon PowerShot A720 IS Digital Camera

The flash no longer works. In "auto" and in either the "auto flash" mode or "forced flash" mode no flash occurs. It is not in "suppressed flash" in the "portrait" screen position mode. The batteries are good. The shutter button is pressed after the charging is completed. The camera is not in "continuous shooting."

Hi there, \012Well first of all try to reset your camera, remove the battery from your camera for 4 hours and then insert them again, it helps you to do a hard reset in your camera. if further you have the same problem then there mus ... Fuji FinePix 3800 Digital Camera

On my D50 the COMMAND DIAL has stopped working so shutter and apertrure cannot be set - but - normal photographs cxan be taken using 'AUTO' or MODE settings on the MODE DIAL. Only P,A,S,M modes cannot be used. Otherwise all functions of the camera work well and photo results are good. The camera has NOT been dropped or jarred.

I have the same issues. Let me know if you got an answer.\015\012Thanks, [email protected] ... Nikon D50 Digital Camera

Nikon D80 with a Sigma Lens (80 to 200 I think). In manual mode, often shutter won't release - this was a close up of a hummingbird with a fast shutter speed. Internal light meter showed underexposed, but the background was dark green. Initially, the shutter released, but later would not operate either with a remote, or by manually depressed the shutter release button. Switching back to auto, the camera seemed to work fine, but in this mode could not get the desired shutter speed. In full manual

In full manual, yes it should. ... Digital Cameras

Just rec'd. an EasyShare C180 and have no idea how to use it. It only came with a small fold-out instruction sheet. To take a picture it says: Turn the Mode dial to (a little camera picture). I have no little camera on the Mode dial, only have : a hand; looks like a video camera; AUTO; a flower, looks like an action figure, and SCN. Can you please assist> Thank you! Sue Palmer

Hi,\015\012\015\012To take a picture, set the Mode dial to Auto . (Please see the attached image).\015\012\015\012\015\012 ... Kodak Digital Cameras

Nikon Coolpix L14 digital camera was dropped recently. Since then, when flash mode is set to AUTO, shutter-release button must be pressed several times to take a picture. If flash mode is OFF, shutter-release button takes a picture the first time pressed.

There is some misalignment within the camera that occurred while it fell. The possibility can be the trigger to the flash which was set off , there can be a crack on the electronic board, a possible switch issue of the flash trigger or a ... Digital Cameras

I changed the batteries in my Power Shot A720 IS recently when the low battery warning flashed, and had taken only two photos when the warning flashed again. I moved the mode switch to playback and the screen went dark "Change batteries now" appeared. I turned off the camera, set the mode switch to shooting, turned the camera back on and was able to take two more photos before the low battery warning returned and prevented any more picture taking. I purchased and installed new batteries and f

Hi, 1st you must use alkline bat or minimum 800 mhp bat....and if problem is not solved then cheak the bat cap and connection clean with aomthing,,,,If any thing else contact [email protected] ... Canon PowerShot A720 IS Digital Camera

I have a Konica Minolta Dimage Z6. The camera worked fine for a year. Got a System Error and now the Mode Button does not work. Can not shoot using the viewfinder and can not place the mode Button to look at photo's. Also am not able to format disk in camera.

I fixed my problem by removing the BATTERY then the MEMORY CARD which I replaced with an empty formatted memory card and replaced battery then connected Camera to my LAPTOP and on the LCD it was saying setting USB connection then with mode switch s ... Konica Minolta DiMAGE Z6 Digital Camera

My D80 suddenly stopped taking photos while I was in Auto mode. I noticed the flash stopped releasing. I've changed lenses, reset the camera's green buttons, switched out the card, reset the clock. It will occasionally take a photo, not necessarily in focus,and the flash will on occasion pop, but I can't figure out what the correct triggers are. Can anyone help? Lens is 18-135mm. Set Lens in in "A" and camera is in "AF"mode. Thanks much.

Hi, Also, try a factory reset found on page 129 of the manual. On the left side of the camera is the terminal cover, inside below the USB connector is the reset switch. If that does not work call Nikon digital 1-800-645-6689. ... Nikon D80 Digital Camera with 18-135mm Lens

Bought a digital camera two weeks ago, FE3000 Olympus. Cant take a picture without horizontal lines appearing on my LCD.only 20% of the pictures I take are without these lines. When I use the video, its is perfect. Still images however are difficult to appreciate. I bought camera for daughter because I thought it was a point and shoot camera. Even in iauto mode I seldom get a perfect shot. What is wrong???????Please help me. I am willing to pay 9.95 if you can help me fix my camera. Again its an

The lines on the pictures are most likely caused by a ccd sensor problem, its the sensor that actually takes the picture.The issue could be the lcd display failing but since the lines come to the pictures that you get from th ... Digital Cameras

Hi Experts, I bought an Olympus C170 camera 6 years before. It was good... recently due to some problem Technicians changed Lens in my camera.. Now the problem is I feel some delay time while I am shooting.. I am not able to grab the scene which I suppose to take. Once I pressed click button.. it takes some time to get flash/photo. Please clarify what would be the reason... Is there any setting needs to be done in my camera .. or its a camera issue.

When taking a picture, you must press the shutter button half-way and allow the camera to lock in the focus (it will beep) and then press the rest of the way when the moment is right for an instant picture. Is that what you do? ... Olympus Camedia D-425 / C-170 Digital Camera

When I switch the camera on the screen stays blank even though the lens comes out, it eventually goes off (with the lens still out after about 40 seconds). I can get the camera to work if I press the green "view" key and then, after the picture appears, press the red camera icon and it will go into auto shoot mode. Happens every time now. I can't take it in under warranty as it was a present and I don't have the receipt unfortunately.

Replace the batteries then check ... Olympus FE-170 Digital Camera

W1 Sharpening I am new to the Sony W1 and I have read somewhere that the camera should be set to the P mode and the sharpening to the ( - ) minus and it would yeild the best results. I am confused, why would you want the picture to be less sharp if your shooting nature for example. Wouldn't it be better to use the + setting? When I download the pictures into my Sony laptop using the Window XP program that came with the Sony K35, how do I view the settings that the camera was at when the pi

I've never heard this philosophy applied to the W1. i usually hear about this associated with the 828 and higher end cameras. the (-) setting is usually used to reduce the amount of noise that the image will have straight from the cam.\015\012\015\01 ... Sony Cyber-Shot DSC-W1 Digital Camera

My Nikon D-40x has an auto focus that won't auto focus. Becasue it won't focus, it won't take a picture with the lens set to that mode. One day the camera worked fine. I put it up in the closet for about 5 months while working odd hours. Took it down removed it from the case, charged the battery and it just won't work. It died all on it's own....Replaced the battery, same result.

When you store a unit with a battery even if there is no obvious signs of corrosion at the contacts of the battery terminals doesn't mean that there is none on thecircuit board it'self. if you feel comfotable doing this remove the back cover of camer ... Digital Cameras

The d40 cameraat wor last night cut out half way through a shoot i was doing. It had the message 'error. Please press the shutter release button again' I tried absolutly everything in the end it came to close to the second shoot so i had to use the spare one. I havnt been into work yet but i doubt theyve been able to do anything to it. Is the anyway i can fix it myself without taking it to a repair place

Read the following blog post to fix your D40 shutter problemhttp://jacko0.wordpress.com/2009/10/13/d40x-underside/ ... Nikon D60 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 4.1692 seconds