Having problems with your Digital Cameras ?

My Olympus FE 360 is less than 6 months old and the flash just stopped working. is it possible that there is a ''simple'' reset or fix/test?


Answers :

There is no reset or fix test. Just ensure that the battery is fully charged, and replace the battery. Replacing the batteries already reset the camera.
Ensure that you have selected Flash on the menu and shot a picture. If the flash does not start, then usually the small pcb that supplies power to the flash has a blown capacitor.
In that case call Olympus number listed on the owners manual. They will give you instructions to validate the warranty and get the camera repaired.

Regards.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Olympus FE 360 is less than 6 months old and the flash just stopped working. is it possible that there is a ''simple'' reset or fix/test?


There is no reset or fix test. Just ensure that the battery is fully charged, and replace the battery. Replacing the batteries already reset the camera.Ensure that you have selected Flash on the menu and shot a picture. If the flash does not st ... Digital Cameras

I have a Philips 9FF2 series photo frame which has just stopped working. I took an sd card out the screen went black and it will not work even when using the reset button. I have unplugged it, tried the reset button but nothing happens just a black screen. The blue light on the on button is working. Thanks Lynne


... Digital Cameras

Hard reset of Nikon s8100? My menu button isn't working at all. The only one that is working is the round scene-selector button on top...and even that one stops working after I press the shutter button (which doesn't respond either). I've tried removing the battery for a few hours and replacing it, but that didn't help. Is there a way to remove the backup battery as well? Is there a button or a trick to doing a "hard reset" without having to use the menu??


... Nikon S8100 Digital Camera

Hard reset of Nikon s8100? My menu button isn't working at all. The only one that is working is the round scene-selector button on top...and even that one stops working after I press the shutter button (which doesn't respond either). I've tried removing the battery for a few hours and replacing it, but that didn't help. Is there a way to remove the backup battery as well? Is there a button or a trick to doing a "hard reset" without having to use the menu??


The symptoms indicate your main battery is failing. Either is not charged or is failing to take a charge. ... Nikon S8100 Digital Camera

New go pro hero 3 will not play video without jumping (starting and stopping). This only happened after the Hero 3 update was done, work fine before this. Is there a way to reset to factory settings


... GoPro Digital Hero 3 Digital Camera

Stopped Working Camera suddenly stopped working, changed batteries, reset - nothing happened! For months it was like this, then my daughter was playing with it earlier and it came on when the power button was pressed but said batteries were low and swiftly turned off again. Replaced batteries and now nothing comes on at all again!!!! Help!


... Vtech Kidizoom Digital Camera

Casio Z-750 camera: The Select/set button has stopped working. Pulled and reset the battery and card. Still won't work. Can't do a full factory reset because the Set button won't respond. Any ideas??? Thanks


I hate to be the messenger of tough news, but this is probably either a switch problem or ribbon connector. Since resetting didn't help, it's going to be, in all liklihood, a hardware problem.\015\012The problem with the switch, is that it's ... Digital Cameras

My Nikon Coolpix LP16 is not detected by Windows on either my PC or my son's laptop, but IS detected by our Mac laptop. I've tried different ports, different cables, reinstalled software, reset the camera -- nothing works. Nikon's tech support was not helpful. My PC runs XP, my son's laptop runs Windows 7. The camera worked fine with both then suddenly stopped working. My device manager does not detect the camera at all.


Microsoft updates frequently make changes to the registry which cause our cameras to no longer be recognized. The simple solution is to start using a separate card reader. ... Nikon COOLPIX L18 Digital Camera

My Sony Cyber-shot DSC-W200 flash has stopped working and when I try to reset it it tells me that flash cannot be reset. What can I do?


Its circuit error need to replace flach unit ... Sony Cyber-shot DSC-W55 Digital Camera

E:61:10 My camera just stopped focusing. I can take pictures but they are blurry and my screen flashes the error code E:61:10. I have tried turning it off and on, taking the battery out, changing the settings, nothing works. I can't find a reset button on the camera anywhere. Does anyone know how to resolve this problem? I have a DSC-T20 Sony Cyber Shot digital camera. An error E:61:10 came today all of a sudden. The screen is blurry and the zoom does not work. The camera has not been wet o


Thx a lot guys... The "sony smack" really works... My friend dropped the cam when he was to take a pic of me and my date at a dinner... I was scared, and didn't know what to do until I came to this site...At first it disappeared, but came back after ... Sony Cyber-shot DSC-T20 Digital Camera

ERR message I have an err message that displays everytime i try to take a pic...i went through reset procedure and did not correct problem ..camera worked night before during a shoot..turned on next day and did not work...we dont have a nikon repair center anywhere close...i hope it something simple that can be fixed here ..it acts like its taking a pic, then message displays and goes off after about 20 sec


I'm afraid, according to the manual you have to send it in...\015\012I would contact Nikon either through their Web site or by phone. It is normally neither expensive nor complicated to send a camera in. Just pack it well to protect it and send ... Nikon D70SLR Camer Armor Smoke Digital Camera

The optical zoom has stopped working on my Panasonic DMC-FZ8. It was working fine, but now moving the zoom control clock/anticlockwise does not move the lens at all. I've tried the "conversion" settings, and also done a complete reset of all settings via the menu, but it hasn't made any difference. All other functions are operating correctly.


... Panasonic Lumix DMC-FZ8 Digital Camera

My flash has stopped working on my D60. It is engaging, and everything is turned on, but no flash. A detachable flash works. Is it possible that it has burned out? And is it fixable?


Hi,\015\012It's possible it's the flash tube and that its burnt out. Since an external flash works it doesn't sound like it's the circuitry which is a good thing. The flash tube being burnt out is fixable however it's a fix that needs to be done by a ... Nikon D60 Digital Camera

Flash problem Recently when i use the camera the flash doesn't work , i put the camera to reset and still doesn't work. I talked with customer service of nikon ,and he said possible the bulbe is gone. What do you think?


Try an external flash\015\012This is one of a few cameras with a hot shoe. \015\012\015\012Also you may of turned off the internal flash in the menu ... Nikon Coolpix 5400 Digital Camera

Flash has stopped working on my Nikon D40. I've tried a factory reset, tried to get to the flash setting but that menu option is no longer available (highlighted) in any mode. I'm thinking it's broken and not a setting thing. Everything else works fine and it still takes pictures just without the flash. The flash pops up when needed but no flash obviously.


There's a common problem in the flash arm. I found this link that shows a simple repair. If you use this and make the repair yourself, understand that you will void your warranty if you have one. Also, do not touch the bulb as you'll get oil on it ... Nikon D40 Digital Camera with G-II 18-55mm Lens

Re Canon Powershot A710 IS The following are not working: zoom, menu, picture selection scroll, picture download button BUT it is still possible to take pictures and download by using PC software. Can the camera be reset to get it working again? D Barrie


HelloOK, firstly i will start by mentioning that this is a reoccurring fault with this specific unit.The problem is most probably that either the plastic pins of the camera buttons that push on the circuit board has been shift ... Canon PowerShot A710 IS Digital Camera

E16 my canon IXY/ canon ixus 50 would no longer work but could still view the pictures i took before it stopped working.. the lens just keeps on flipping out when turning it on but the screen shows and E16 code at the lower left section of the lcd.. i really need your help.. i hear something unattached small object inside it when i shake it a little, is it possible that it's somewhat part of the circuitry got losen and fell? i really hope someone could help me.. i searched all over the intern


I heard this was solved on one occasion when using a canon mem card. or one with a lower amount of memory, 16 megs.\015\012\015\012I also heard this problem described as basically the same as the E-18 that stands for a screwed lens mechanism(more inf ... Canon PowerShot SD400 / IXUS 50 Digital Camera

I have a 3 year old Sony DCR-DVD202E Camcorder which has worked perfectly up until yesterday, when the lens cover refused to open. Other thsn this the camera powers up normally and the LCD screen shows a white dot where light is entering through the cover I have tried changing the battery, switching the camera on and off many times, powering it from the AC adaptor and, at the suggestion of Sony, resetting the camera. None of this has worked. It is possible to open the cover manually, so it is


Happened to me before. NO Problem!!! The mechanical lens cover is "powered" by a small spring. When a little bit of dust/dirt/sand gets into the track it slides in, i gets stuck. CAREFULLY open the lens cover (maybe with the help of a toothpick) and ... Digital Cameras

Lens error?!? My Kodak easy share c643 camera has suddenly stopped working and only turns on for a few seconds saying "lens error 2e,1,0,-3" Is my camera gone forever or is there a way to fix this?


Try these procedures. ... Kodak EasyShare C643 Digital Camera

Vivitar 8300s i have a vivitar camera which i bought about 18 months ago and i love as it is easy to use, unfortunately the backlight has stopped working on it, i can still take photos and download them onto my computer but i cannot see what they are until afterwards, my brother thought that maybe we could reset the factory settings and that may fix the problem but we do not know how to do this, i would be grateful for any information or suggestions you know of that may help. thankyou


... Vivitar ViviCam 8300s Digital Camera

My Canon A620 has suddenly stopped finding the memory card. It comes up with "No Memory Card" and will not do anything else. I've tried a different card but it is the same problem. Possibly there is a system reset somewhere?


There are several possible causes for "memory card locked" or "memory card error", and "no memory card". Some include trying to use of a 4GB SDHC card with an older camera made before SDHC format came out. Others include problems with the switch on t ... Canon Digital Cameras

My panasonic lumix dmc fz28 won't flash. It used to work fine but then stopped. I tried the menu reset and nothing changed. Swapped batteries - no difference.


The issue here is what we call the flash capacitor inside is bad what is going on is its not charging or you got a bad flash bulb ether or here your going to need a camera shop. I would not recommend you fishing around inside the camera as that capac ... Panasonic Lumix DMC-TZ3 Digital Camera

My auto focus on my Canon eos 10D stopped working, what could be wrong and how can I fix it if possible?


Hi there,\012Well first of all you can try another lens. Then you'll know if it's a problem with your camera or lens. If you don't have another lens, go to Ritz and pretend like you're shopping and shoot a bunch of test frames. so please ... Canon EOS-10D Digital Camera

Sony HDR-HC3E error code C31 22 and message 'reinsert cassete'. I've reinserted cassette, tried another new cassette, checked for dirt etc. It was working the day before, it will record but on playback the error code and message appear, and tape stops. It will play last 2 seconds of recorded video. I've removed power, battery, pressed reset. No mechanical damage. What is causing it?


... Digital Cameras

Our camera stopped working and it is still under the one year kodak warranty. Can you please advise me on correct actions to replace my camera as quickly as possible


!st call them for a RMA retune manufacture autherzation or go to a camera shop that your trust that can handle all these proceedures.\015\0122nd if your sending it back in use the rma number and put it on the package. ... Kodak EASYSHARE M340 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1601 seconds