Having problems with your Digital Cameras ?

Message on screen "turn power off and on again" when switching the camera on


Answers :

This problem appears when the zoom motor starts malfuntion the remeady of its is to replace the zoom motor (if comopnent level repir is availble in ur area) other wise u have to scan complete lense block assembly. u didnt mention model no.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Cannon Power Shot A520 Camera will not power the lens up when I turn it on. I get the message "No Image" on the viewing screen, but nothing else happens. Back Switch is set on camera symbol, but camera acts like it is set on view. I have installed new batteries and battery terminals are clean.


The camera may need a software update which can be done through manufacture for $50 or you can downlaod an update from their website and follow the directionsOr the zoom may be dirty or debris is stuck in the zoom lens and needs to be blow out ... Digital Cameras

I have a Sony Cybershot DSC-W120 digital camera. The problem I am having is in regards to the lens going in and out whenever I switch on the device. The an error message appears on the screen saying "Turn the power off and on again". Should I take apart the camera? Please assist, thank you.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Digital Cameras

I have a Sony Cybershot DSC-W120 digital camera. The problem I am having is in regards to the lens going in and out whenever I switch on the device. The an error message appears on the screen saying "Turn the power off and on again". Should I take apart the camera? Please assist, thank you.


Try new batteries ... Sony Digital Cameras

I have just downloaded the camera on to iphoto and have cleared the camera memory . I clicked the eject icon on iphoto and once cleared unplugged the USB download cable . I have just pushed the power button to turn the camera on and firstly get the message on the camera screen "Access" then a message comes up saying "turn the power off then on again " When I do this the same process repeats itself . The lenses wont open and protrude out of the camera ready to take photos. The battery has ju


Sounds like you did two things wrong...you deleted/erased/or formatted the camera using the computer. You disconnected the camera without using the "safely remove hardware" function. ... Sony Cyber-shot DSC-W50 Digital Camera

When the camera is switched on the lens goes in and out twice and then the message that appears on the screen is 'turn the power off and on again'


Hi, \012 \012 Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolv ... Sony Cyber-shot DSC-W50 Digital Camera

Message on screen "turn power off and on again" when switching the camera on


This problem appears when the zoom motor starts malfuntion the remeady of its is to replace the zoom motor (if comopnent level repir is availble in ur area) other wise u have to scan complete lense block assembly. u didnt mention model no. ... Digital Cameras

Hi, I have Nikon P90. From last week i am facing following problem. Whenever i switch on my camera for taking pic, everything starts but i get message on the screen " Lens Error (If lens cap is attached,turn the camera off, remove the lens cap,and the turn the camera on) The above error message is their despite i opend the shutter of the lens. Kindly help me to know the above problem.


Hi,Here is a tip that I wrote about How toget a Digital Camera Lens to work againSteps toRepair a Digital Camera Lens\012heatman101 ... Nikon D90 Digital Camera with 18-105mm lens

I have a sony cybershot wsc 1000 which when the camera is turned off the lens will not go back in.When turned on again the screen says Acess and then "turn the power off and on again" when i do this nothing happens and when switched on again it is exactly the same .the camera will not take pictures or show anything on the screen .It will playback old pictures.Any Clues?


Lens mechanism of your camera isn't working and you need to contact nearest Sony repair shop to fix camera properly. ... Digital Cameras

SONY DSC-S600 Sorry, no actual error -- what happens is this:- Power on camera, message comes up "Turn the power off and on again". Tried this-no good. New batteries-still no good. Sometimes it will start with an "Access" screen and then go into the "Turn the power off" message. Hope this explains the prob better Regards Sandra


If you are able to access the MENU option, then try to initilize the camera by following the steps mentioned below: \015\012\015\012Please press MENU to display the menu items.\015\012Please go to the SETUP menu and select the SETUP ... Sony Cyber-shot DSC-S600 Digital Camera

After uploading pictures from my camera to my pc yesterday, the zoom lens will no longer retract into the camera. I do get a message on the screen of the camera that says turn the power off and on again. I have tried everything, and still no luck. I have plugged it back into the pc, I have charged it, and have turned the power on and off at all options, and it still will not retract.


I believe its a sony cam. this generally happens if you have dropped it. when the message comes. try tapping the camera. if it works then you are lucky. if not then you have to change the lens array. it costs about 60$ ... Sony Digital Cameras

We have installed new xD-Picture Card M2GB into Olympus Digital Camera Model No. C-750 Ultra Zoom not work, Screen mentioned Card Error I purchased a 1GB Sandisk (used camera) but when I power camera on I get a "Card ERROR" message. The very first time I powered up I programmed the date and time....but then got the error message. Now I get it every time I turn it on. I don't have another card to test it with:(


Go here\015\012http://www.casio.com/home ... Casio QV-R40 Digital Camera

My cannon rebel will not take picture or go to the menu the only thing it will do is turn on. And when i turn it on a message pops up that says "shooting is not possible. Turn the power switch to off and on again or re-install the battery." I have tried turning the camera on and off and reinstalling the battery multiple times but nothing works. Do i have to take my camera to a camera shop to get fixed or could i do something at home to fix it??


I think either shutter unit or cmos unit faulty. you cant fix at home you have take to canon repaired centre ... Canon EOS Rebel XSi Digital Camera

I changed the batteries in my Power Shot A720 IS recently when the low battery warning flashed, and had taken only two photos when the warning flashed again. I moved the mode switch to playback and the screen went dark "Change batteries now" appeared. I turned off the camera, set the mode switch to shooting, turned the camera back on and was able to take two more photos before the low battery warning returned and prevented any more picture taking. I purchased and installed new batteries and f


Hi, 1st you must use alkline bat or minimum 800 mhp bat....and if problem is not solved then cheak the bat cap and connection clean with aomthing,,,,If any thing else contact [email protected] ... Canon PowerShot A720 IS Digital Camera

Lens stuck Please help me, I tried to turn on my camera today (it had been working fine before) and when I tried to switch it on the lens would not fully it open and my camera was making a whirling noise. The screen is black and will not take photos. The lens won't open fully and when it does eventually close has difficulty doing so. The camera then makes a beep beep beep noise and displays "Please turn the power on and off again". Please help I can't live without my camera and can't afford


If the lens is not coming out, its stuck, or it wont completely open or close, that is the lens assembly, that needs to be repaired. You need to take it to somebody, that can either repair it or replace it for you. There is nothing that can be done, ... Sony Cyber-Shot DSC-P8 Digital Camera

Kodak v610 camera (easy share) My 10 year son was using our v610 camera and the following error message E45 (please see user manual) appeared on the screen. We were unable to switch the camera off and therefore the shutter remained open. The shutter will only close if I remove and replace the battery and when I turn the camera back on the shutter remains open and the same error message returns. I have checked the manual and it doesn't mention this problem. thank you jane


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Kodak EasyShare V610 Digital Camera

Black screen The screen is black when I turn the camera on, both on the flip out screen and if I use the view port...and yes, the lense cap is on. I have a Canon Power shot S21S and my view finder is black, but I can see the pictures I have already taken just fine when I switch the camera over to playback.


Sounds like you have a bad CCD. You can try contacting Canon to check out your options on how to get this repaired. Unfortunately the S2IS is not on their CCD recall list of cameras. ... Canon PowerShot S2 IS Digital Camera

My Sony Cybershot DSC-S950 10.1MP Digital Camera with 4x Optical Zoom with Steady Shot returns error message "Turn the power on and off again"! on the screen. also, the lens dont retract like it normally does. i turn it off and on bt the error message persists. when i leave it on, it then turns off by itself after about a minute.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to g ... Sony Cybershot DSC-S950 Digital Camera

When I turn my Sony Cybershot 7.2 mega pixel camera on, the lens keeps going in and out and the message "Turn the Power on and off again" shows up on the LCD screen. When I turn the power off and on again, the same thing happens over and over again. Help!


Same problem, recently i broke the lens but fixed it my self but in the process i blew up the flash component of the camera and now have remnoved that part the lens works fine now but get that same message. is it because i have removed the flash comp ... Sony Cyber-Shot DSC-S500 Digital Camera

This camera was working fine, was turned off, and then a day later wouldn't work. The LCD screen on back works only if the Mode Switch is in the review mode (or DOWN), and does not light up under the picture taking mode (or UP) position. Also, while the switch is in the UP position, the ON/OFF power indicator button no longer stays lit. It does, however, stay lit in the Mode Switch in the DOWN position. First problem in three years. Nice little camera.


You may need to take it in to get it serviced or ntry out thees sights on the webhttp://software.canon-europe.com/ ... Canon PowerShot A520 Digital Camera

Canon A400 Hi, I have the above camera (canon power shot A400) and have just solved the E18 error by tapping the plastic A/V out cover - THANK YOU ! However, now, although the camera turns on, lense extends and I get full working order - after a few minutes I get the message 'Change batteriers'. and the camera dies. I have now put in several new batteries (including the little(cr1220) but the same message keeps coming up and the screen and the whole thing dies after a few seconds. Is this a furt


Having using standard LR6 batteries in a Canon before you will only get 3 or 4 pics max before it drains the batteries. You really need high power AA's like 2300mAH+ rechargeables for any good performance or Lithium AA's ... Canon PowerShot A400 Digital Camera

Hello, My Sony Cyber-shot DSC-W190 got wet and when I try to turn it on, basically the lens does not open it sounds like the camera is clicking as if it is struggling to turn on. Then the message on the screen reads, "Turn Power off and on again".. Once the camera dried, I was able to view my pictures but I can not take any pictures or videos.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Sony Cyber-shot DSC-W190 Digital Camera

When I turn my DSC W230 Sony Camera on the lens opens and closes several times then finally closes and I get a message to turn it off and on again, but it just keeps doing the same thing. I have tired removing the battery for 20 minutes, reinitializing the camera and switching to different batteries that can power up my other camera.


\012Hi, \012\012Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolv ... Sony W230 Digital Camera

When power is turned on the zoom lense moves in and out on its own for a couple of seconds then stops. Camera remains on (battery is charged) The message changes from "access" to "turn the power off and on again." When that is done the same process happens again. Photos can be retrieved that are in the memory to view but the problem is getting to the starting screen in order to take a picture. What's up with that? Hope you can help!


This could be dust or lint or sand that has worked it's way into the lens assembly, and is keeping the lens from initializing. Often, you can take compressed air and blow it into the front lens assembly, to try to free up the small gears there. H ... Sony Cyber-shot DSC-W55 Digital Camera

Power?? My camera turns on and the lens part extends out, but the screen is totally blank. When I switch it to view previous photos, it works fine..I just have to turn it "off" and the pictures come up..But if I switch it to take a picture, it goes completely dark again...it's almost three years old and has no damage done to it...


Had the same issue. I changed battery, I replaced Duracell by Sony rechargeable batteries. It works fine now. i think that the issue comes from battery shape. They do not have exactly the same. hope it helps. ... Canon PowerShot A510 Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


This is a hardware problem. Your simptons is tipical of a lens position sensor being faulty.\015\012\015\012There is however nothing you can do yourself. Contact your nearest Sony dealer and take the camera to a Sony service centre. ... Sony Cyber-shot DSC-W50 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4308 seconds