Having problems with your Digital Cameras ?

Camera Norcent DCC 725 turn itself off after 25 sec., even when I am going through the menus and pressing buttons. The 'power save' function is set to 3 min.


Answers :

Try to remove the power save option and see if it turns off, make sure u have sufficient battery power too. If it still persists then u have to do a software upgrade.

Thankyou
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Camera Norcent DCC 725 turn itself off after 25 sec., even when I am going through the menus and pressing buttons. The 'power save' function is set to 3 min.


Try to remove the power save option and see if it turns off, make sure u have sufficient battery power too. If it still persists then u have to do a software upgrade.Thankyou ... Digital Cameras

I am unable to take pictures after turning on the camera. Each time I turn the power on I have to go through all the set up steps in order to take a photo. How can I go through the steps and save them so that each time I turn on my camera the settings are saved and I do not have to go through the steps each time?


Make sure that you don't have virus in your memory card.\012format all memory spaces and then again reset it.\012restore to factory setting\012\012if you like this kindly rate me ... Casio Exilim EX-Z750 Digital Camera

Is there a power saving setting? I think we accidental set it as the camera screen goes black after about 30 seconds. If we push the shutter button, it powers back up, but it used to not go black after 30 seconds. The battery is fully charged.


The "Auto Off" setting in the Setup menu will let you select from 30 seconds, one minute, five minutes, or 30 minutes. See the "Using the SET-UP Menu" section of the manual (beginning on page 120 in my copy), especially the "Conserving Battery Power: ... Nikon Coolpix 5700 Digital Camera

Black screen Turn on the camera, the start screen shows up, then it turns black when ready to get pictures taken. Tried going through all menus, can see all menus just fine, didnt mess with anything. Tried every setting, still, nothing. Also, can see all saved pictures, and the other lens was cleaned off.


Try cycling through the Display button until you're able to view photo to be taken. ... Sanyo VPC-S500 Digital Camera

Hi, my son dropped my LZ2 camera and now it starts when I power it on, all menus and functions seems to be ok, but no image is displayed in the LCD. Any ideas what's going on?


The LDC screen most likely broke the screen did not crack by the actual underlying LCD screen broke the only option is to replace the screen or have it replaced at a local camera shop ... Panasonic Lumix DMC-LZ2 Digital Camera

I have the Canon Powershot SD1200 IS. the functions: Disp., Menu, Func. Set do not work. nothing happens when i press them. When I hit the play button it keeps going through all my photos very quickly. and the 2nd green light blinks quickly. Not one by one manually. It doesnt matter if the camera is on auto or camera. nothing works. On the digital screen on the botton left there is a symbol of a rounded triangle with an S and bottom right there is 9999 when i change it to manual on the upper lef


Try this...remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on. ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera

The LCD screen only switches ON in C(Custom) Mode and tansfers to Viewfinder in other Modes.In display Images mode it regains to the LCD screen but as soon as the click button is pressed it again switches over to the Viewfinder I have tried with the Power Saving options and the Custom Settings with no fruuitful result. Please kindly help me in sorting out this problem


Try pushing the disp. or display button. I hope this helps! Please rate my answer. ... Canon PowerShot A570 IS Digital Camera

When I turn on my Olympus FE-190 camera it shows the "card setup" screen with two choices: Power Off (highlighted) or Format, and gives a 3-ring alert sound. (It does this no matter what is set on the program dial: auto, guide, etc.) If I press OK to "set" with Power Off highlighted, it turns off. If I highlight format and press OK of course it warns me I'll be reformatting the XD card. When I attach the usb cable the screen on the camera shows PC highlighted but when I press OK it says "one mom


Fixed it by reseating the xD card. Voila! Back to normal. ... Olympus Digital Cameras

Camera shuts down after shutter button is pressed. It shuts down halfway through the shutter operation. Everything else works fine-reviewing pictures, settings in menu, focusing, exposure settings etc. The camera focuses ok when the shutter button is half pressed then when you press the shutter button fully, the mirror goes up, shutter appears to open then the camera shuts down with no power. Only way to get mirror etc back to normal is to remove the battery and refit. When camera is turned b


... Canon EOS 40D Digital Camera

Hi. I have a finepix jx250 digital camera. The camera lense keeps going in and out and there is a messege that says to turn the camera off and on again.. I did that but it still did the same thing. I tried pressing the shutter and power button at the same time. I tried pressing the power button and the menu/OK button at the same time. I tried taking the battery out and putting it back in. I tried taking the battery and the memory card out putting the battery back in and leaving the memory card o


Hi,Checkout this tip about digital camera error messagesLens Errorfix for Digital Cameraheatman101 ... FUJIFILM FinePix JX250 Digital Camera

Command dial on a friend's Fuji Finepix S9000 is NOT functioning. Can't control aperture, shutter speed, flash settings, etc. Can it be opened and fixed (he has no warranty, thus no problem with opening it). Is there a special setting or way of turning or pressing buttons that he is doing wrong? It says to press (and hold?) a button then twist the dial, but no change is made as far as I can see. I have tried enless things and have much experience (though I'd be a fool not to ask others). A


Hi. I just bought this exact model on ebay and it arrived with the same problem. I found many others with the same problem on various sites, but happened upon this extremely thoughtful man's album showing the steps to fix it. Thought I'd share with y ... Fuji FinePix S9000 Zoom Digital Camera

I have an agfa Photo waterproof compact 109uw and i am trying to change the date on it. I go 'menu' then 'setup' then down to 'date & time' then across and change the date setting 'day, month, year' then down to time (which changed fine for me) but when i go back to 'date & time" it reverts back to the original date. What am i supposed to press to set the date?! thanks helen


... Digital Cameras

I have just got back from holiday where I took 325pics. Earlier today I was able to see them on screen but had not yet downloaded as I was going to take to a store to print out tomorrow. Now when I switch the camera on it gives me 2 options - Card Setup either power off or format. I don't want to press yes and delete the pics but if I press no the only other option it takes me back to is to power off. At this time i can't take any photos either. Camera - Olympus C-480 zoom with an XD Pictur


Whatever you do DO NOT FORMAT the card. Take it in to a CAMERA shop, not walmart or drugstore, They can probably remove the card and print from that. Sounds likeyour card is full. They can then put all your pics on a CD and you can then reformat th ... Digital Cameras

Sony dsc w55 i was trying to clean the camera whilst the zoom lens was out and must have pressed to hard and when i press the power button it wont go back in and i can not take any pictures, please help as i need my camera to work as i am going on holiday on sunday!


HelloThank you for using FIXYA!!!This\015\012 is a suggestion. If you do not feel comfortable trying it, y ... Sony Cyber-shot DSC-W55 Digital Camera

PHILIPS DTR4610/28 Watching terrestrial TV in Italy which has gone all digital needing decoder, I usually when switching off go through a ritual of pressing first the standby switch on the PHILIPS DTR4610/28 then pressing the power (off) button of the TV (R2 20LZ50) remote (which I use only for this and a bit for additional volume control). To switch on I go through the reverse routine. Maybe I did something in the wrong order last night, plus I pulled out aerial and mains of device and TV.


Hi ,I am Sorry to Hear regarding the problem. If you are Satisfied with the Solution Offered, Kindly Accept the Solution and Close the Thread unless, any Further Information, we would be glad the Answer that.Let me know, if ne ... Philips Digital Cameras

I have a kodak m1033 that suddenly doesn't do any functions once it is powered on. I have changed the battery and swapped out battery and memory card with another known good M1033. it will not zoom, allow mode change, go to menu. just get a chance to take one picture then it freezes up until it is powered off again but still won't zoom or perform any other functions.


After some really frustrating hours on Internet I managed to solve the\015\012problem myself. 1.Connect the camera to your pc and let it charge.\015\0122.Switch on the camera and let it be detected by the pc. 3.Pull the USB\015\012out while you leave ... Kodak EasyShare M1033 Digital Camera

Hi I my new(3 months old ) PowerShot SD1300 IS camera has a problem. Initially worked fine ,but suddenly it is not working. Issue is it will power up only once after many (5 to 6 hrs) put idle.When powerd on , lens will come up and the camera will go of,lens will remain out.It wont respond(power led also goes off).Again if we put idle for some hours when we press first lens go in ,comes out and again goes off. Please let me know what could be the problem.I checked it is not problem with battery


Hi. I\015\012 note that you have checked the lens and Canon service has said the PCB \015\012needs to be replaced, but the cost is too high. However you have asked \015\012if there is anything else you can do. ... Canon Digital Cameras

I have a sony cybershot, model DSC-W55. when i press the power on button, the camera does not turn on as it usualy does. instead, i get a black screen with the word Access on it. (also, when i turn the camera on, the lenses keep going in and out more frequently than before.) so the screen Access screen is just there right now, but when i click buttons like menu or display it makes beeping noises and it says 'press power on and off again '. i can still view the pictures i've taken but can't seem


You can try contacting Sony - maybe through online chat if its available for free. From what you have described, it sounds like a hardware failure. Contact Sony, and if it is a hardware failure, they will replace it for free. Or, if you have bought i ... Sony Digital Cameras

KODAK LS753: when the camera is powered up the screen comes on to set date and time. The selector five way switch can move between set and cancel. When the switch is pressed straight in nothing happens. I was thinking there may be a hard reset somewhere on the camera to clear this glitch. Cycling the power does not change anything.


... Kodak EasyShare LS753 Digital Camera

Hello, When I just bought this camera several years ago, I entered the time and date settings and after I've done this it never asked for time/date settings again. But now every time I turn on the power button, I have to set the time an date and press "SET" for OK. I read somewhere on the internet that others have encountered this problem as well. Can this be solved??? Thanks in advance, **** Muilwijk


You may need to take it in to the camera place to get the internal batery for the clock replaced also you may need to up load the driver program for the camera ... Canon PowerShot A520 Digital Camera

Canon SD900 selection options not responsive. The selector wheel, Function Set button and menu selector only work from time to time. Even if pressing the ring brings up info to the LCD, nothing can be changed because the Function Button and the Menu button are not active. This is a random problem. Sometime, I can bring all functions back to life by removing and re-inserting the battery and restarting.


Sounds like the board has become damp and possibly corroded in certain parts this causing the random effect with the buttons their isnt much you can do unless you can remove the case yourself and give it a good clean but doing this is extremely diffi ... Digital Cameras

What is the proper sequence in setting up self Timer I lost my instruction book. I never used timer in the past; I have a cannon power shot A560. I go to menu and scroll to timer set 10 sec and 2 shots. push set button. what now?


First you press the self timer button. Then press the shutter button to start the timer.\015\012You can download the manual under the guides and manuals section at this link: http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fc ... Canon PowerShot A560 Digital Camera

No image on lcd,if you snap a picture,the picture will be black,camera has set up for a while.it will power up and show functions and set up info on lcd you can set time and date,but no image,flash works,but takes no picture,any ideas?


It is known problem of ccd imager chip failure in Canon A85 camera, Canon offers free of cost ccd imager chip replacement.Click ... Canon PowerShot A85 Digital Camera

Camera does not have a memory card. No pictures exist, but I get MEMORY FULL message as soon as camera is turned on. When I go to the menu and go to MEMORY, the option ALL ERASE shows but I cannot get to it -- pressing the 'go to the right' function on the main menu button does nothing. Connecting the camera to the computer, I see that there are no contents in the folder(s). Have had the camera for 3-4 years, never had a memory card, would hold 4-6 photos in memory of camera before this. Ba


This can be a problem with the memory card, we can try here first something like formatting the memory card via the camera Menu. You also mention that you can access the memory card when connected to the computer you can also format it from there. ... Olympus Stylus 600 Digital Camera

I would like to restore all the setting to original factory setting when I bought it. I followed the recommendation, removing battery while press power button, it didn't work. I'd like to set manuel. Do you have that info? thanks


... Sony Cyber-Shot DSC-F717 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2858 seconds