Having problems with your Digital Cameras ?

Canon powershot sx10 IS. It will not print whats in the LCD view, its cutting the top,bottom and sides off

Answers :

I suspect the problem is in the settings of your printer. I usually do not print directly from the camera so I don't get the problem. However (I don't know the canon) there might be a menu in your camera where you can set the size of the print out...
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Canon powershot sx10 IS. It will not print whats in the LCD view, its cutting the top,bottom and sides off

I suspect the problem is in the settings of your printer. I usually do not print directly from the camera so I don't get the problem. However (I don't know the canon) there might be a menu in your camera where you can set the size of the print out.. ... Digital Cameras

Cracked LCD on Canon PowerShot A510. A few weeks back, I noticed that my LCD view screen was cracked on my camera. The camera still functions since I use the other view finder anyway. However, I obviously cannot read any type of menu without a function LCD screen. What next?

Your best option is buy a junk one off ebay and replace LCD. LCD replacement is very straight forward, just remove the screws, pry the case apart and the rest will be easy. Use the one you buy off ebay and practice getting it apart. ... Canon PowerShot A510 Digital Camera

I have a Canon Powershot 5S IS. The image on the LCD screen is not rotating when I rotate the screen, and when I snap the screen into place with the LCD side out it goes from displaying on the LCD to displaying on the viewfinder. It was working properly before, but I can't figure out how to get it back to those settings.

On camera menu, turn on Reverse Disp. ... Digital Cameras

The Viewfinder on my camera Canon Powershot SX20IS turns into black, but the LCD screen is okay. How will I see both the viewfinder & the LCD in normal viewing?

... Canon PowerShot SX20 IS Digital Camera

Canon Powershot SX10 LCD screen is white after replacement

Either the screen is faulty, not properly connected or the board the lcd is connected to has a fault.Not much to do in this case, reset the camera, reconnect the lcd cable and try again, if it still doesn't work, I'd suggest you contact t ... Canon Powershot SX110 IS Digital Camera 9.0MP

Lcd screen the screen illuminates,but it doesn't display anything. I have a canon powershot SD110 digital elph.  When I turn the camera on the lcd lens illuminates but does not display images.  I cannot take new pictures but can view previous one.  Menu options occurs on the screen and can be changed.  I have misplaced my information booklet and do not know what to do to troubleshoot this problem and if it can be fixed.

Cannot get images deleted  ... HP PhotoSmart M437 Digital Camera

My canon powershot a1000 when turned on, displays a black screen with icons. its not like this before. normaly when i turn it on, i can see the view from the lcd but now no more. but everything seems to work as normal except for the black screen after turning it on. my trick is to press DISP in order for me to see the lcd display.pls help. thanks

... Canon Powershot A1000IS Digital Camera

I have a Canon Powershot S30 with a bad LCD. Otherwise working. I also have one with a working LCD, but the lens will not extend. I'd like to make one out of two. Is there a manual with exploded views available so I can do it myself or is that unrealistic. I have several cameras, so I suspect that a professional repair would cost more than the camera is worth. Like most electronic relics, it seems to be cheaper to replace than repair.

Try these fixes for the one with the bad lens:\012Fixing a Lens Error on a Digital Camera\012\012This has to b ... Digital Cameras

My Canon Rebel has stopped importing pix properly, despite being quite new. It displays pictures ok, we get to Windows explorer to view them as thumbnails as normal(with 0 kb size!), which Windows cannot open or view, or drag or copy over. On the camera side I can zoom into the image on the LCD display. 2 memory cards and the same thing...

Try going to the Canon website for your country. It may be a driver problem in that the driver to download your photos is either out of date or incorrect for your camera. I had a very similar problem with my EOS 350D in that it would not import pictu ... Canon Rebel XT / EOS 350D Digital Camera


As aseletroniqu stated, this sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free worldwide, and may also include free shipping both ways (free shipping varies with countries). This is regardless of your camer ... Canon PowerShot A75 Digital Camera

My Cannon Powershot SD1000 LCD screen does not work. It will take pictures but will not let me change options, view the menu, or view images- past or present. Pressing the DISP button does nothing.

Has the screen been cracked/damaged? Was your camera dropped in any liquid? It's worth it to try having the LC ... Canon PowerShot SD1000 Digital Camera

Blurred picture I've been using canon powershot A85 for about 8 months.For the first 5 months i had no problems.Then i stopped using it for about 2 months coz there was no necessity(i removed the batteries and kept it carefully).When i took it yester day, and tried to take photos the picture was blurred.When viewing through the LCD before taking the picture it looks very clear.But after pressing the shutter the photo taken looks blurred and when i view it playback mode again it was blurred.But t

This Service Notice will update Canon U.S.A., Inc.'s previous CCD Image Sensor Advisory, dated October 6, 2005.\015\012\015\012It has come to our attention that the vendor-supplied CCD image sensor used in certain Canon digital cameras and digital vi ... Canon PowerShot A85 Digital Camera

LCD Problems Hi, My Rebel XT's Top LCD screen and Display in the view finder isn't working properly. It displays random "symbols" but is identical in both. An example of this is the range finder will roll down but 3 notches will stay lit up ( 1 on one side 2 on the other. Do i need to send it to back to Canon?

Probably a canon repair situation ... Canon Rebel XT / EOS 350D Digital Camera

Hello, re: CANNON POWERSHOT A 85 camera is not even 2 yrs. old yet and it started to have streaking lines in the lcd monitor now it does not show any view at all. it is completely black when trying to take pics. put brand new cannon in and to no avail. this thing cost over $225! spoke to several people they had the same problem with the cannon powershot a 85. what is the remedy? i am sure you have had many complaints according to the internet.

... Digital Cameras

Both my lcd and Viewfinder appear black (no image) in in shooting mode. I am able to view pictures on both the lcd and Viewfinder when I am in playback mode. i have a Cannon Powershot S3 is. Any suggestions?

I have this EXACT problem and notified Canon Customer Care via email today as I have found around the internet that this camera and it's predecessors had the same problem as do other A models. I got a canned answer about how they know of NO issues w ... Canon PowerShot S3 IS Digital Camera

I have a Kodak c913 camera, when I pring pictures from the g docket for some reason it doesnt print the picture as what is in the camera view it reduces the picture but it cuts the top bottom and sides. When I am print it does say a message ie resizing but as it now cuts of heads backgrounds etc I find that I cannot print using my kodak docet anymore. Can you help?

When resizing You will sometimes need to adjust the printer to the software.\015\012Try to print directly from the picture and not print though a picture programme.\015\012\015\012Contact KODAK:\015\012 ... Kodak EasyShare C913 Digital Camera

Canon PC1048 powershot S50 The lcd display does not light up any more. Can only take pictures via the view finder

... Canon PowerShot S50 Digital Camera

Canon Powershot TX1 LCD view screen goes white when turned on

Fletch552, this just happen to me. Ihave the same camera Canon PowerShot TX1. It started on 2009/Juneand finally broke on 2009/July. I had this camera for less than ayear and I take good care of it too. I am so upset. Since thiscamera is so new ... Canon PowerShot TX1 Digital Camera

Canon Powershot S1 IS - Both in LCD and View finder - only blank is coming

Gandhi Gurunathan...This is not made for you...So take ur freakin *** out of Korea n just stay in India n buy stuff frm thr....Glenne ... Canon PowerShot S1 IS Digital Camera

Replace LCD screan in canon powershot SX10 IS

If you do a Google search for 'digital camera parts' the first listing is a website that can help you. The LCD is $65 with shipping.\015\012\015\012The website name is: Darntoothysam com, then search by "SX10" and you will see it. ... Canon PowerShot SX10 IS Digital Camera

We have a PowerShot A75 Canon digital camera that will not focus. We can view pics from the flash card, zoom in the shooting mode, but LCD monitor is blurry and out of focus.

... Canon Digital Cameras

Cannon A70 powershot camera, cannot see through the lcd screen to take picture, but can view menu.

See this link. This service notice is effective world wide. If you ... Canon Digital Cameras

Blurry viewfinder While the viewfinder has always been a little blurry, I've had a recent problem with it being so blurry you couldn't even use it take a picture. Then after swtiching to the LCD viewfinder to shoot from, I see a large yellowish black line on the left side of it, doesn't seem to affect the pictures as I can view them afterwards ....am I going to have a major repair>

As mentioned, might be a defective CCD imager. You may be in luck. Canon should fix this for you for free, including free shipping both ways. Please check the following two links for more info:\015\012http://camerarepair.blogspot.com/2007/11/ca ... Canon PowerShot S1 IS Digital Camera

Canon powershot sx10 camera--often when i open lcd viewer, it is black and i cannot seem to get it to come on----turn off and on again, open & close again--nothing seems to get it to come on. when it does show viewer there doesn't seem to be any rhyme or reason to it? any help is appreciated.

Have you tried clicking the display button on the lower right hand side of the lcd panel (when closed) ? ... Canon PowerShot SX10 IS Digital Camera

My Canon PowerShot A85 no longer shows scene on the LCD screen before shoot nor immediately afterward and records a blank on the memory card. Photos taken before this problem started can be viewed on the screen in review mode. Otherwise camera feels normal, i.e. turns on and off, zooms, sounds like it recorded a photo.

I called Canon customer service. Problem is likely due to a defective CCD image sensor. The camera is well beyond warantee, but they will fix it free including shipping both ways. No proof of purchase needed.I can't get the web site pasted i ... Canon PowerShot A85 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1418 seconds