Having problems with your Digital Cameras ?

Hi I am using a I link cable from my Sony HDR-HC5 camera with HDV out. My input settings are HDV input ---Canopus HQ 1440x1080 50i Output settings are Generic OHCi SD Pal----720x576 50i 16.9 44.1 KHz. The problem is I cannot get the capture icon button to light up to proceed

Answers :

\015\012If you are using Imac then this will work with IMOVIE O8. You have to:
Step 1: Plug in camera with Firewire with the camera OFF
Step 2: Turn ON camera
Step 3: Start imovie

\015\012You can also try to connect your I-link to Firewire cable then, start Imovie and also turn on the camcorder (does not matter which order). On Camcorder touch screen press Guide, then Connect Guide, then the Icon showing the computer, then ok the first screen ( should show the inline to I link cable), then Press HDV. After this Press No. Press okay, then okay again, then end. If still the issue is not resolved please check these links:
\015\012Sony HDR-HC5
\015\012Sony HDR-HC5 Connections
\015\012Please do accept the solution if the issue is resolved or else revert for further assistance.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi I am using a I link cable from my Sony HDR-HC5 camera with HDV out. My input settings are HDV input ---Canopus HQ 1440x1080 50i Output settings are Generic OHCi SD Pal----720x576 50i 16.9 44.1 KHz. The problem is I cannot get the capture icon button to light up to proceed

Hi \015\012 \015\012If you are using Imac then this will work with IMOVIE O8. You have to:\015\012Step 1: Plug in camera with Firewire with the camera OFFStep 2: Turn ON camer ... Digital Cameras

I cannot down load my pictures from my camera. it shows problems with cable so I must have done someting with the settings. I had been having problems taking pictures so I played with the settings and now it takes pictures but cannot download them. Help????

Hi - I was suffering from this problem - I changed the batteries and changed the USB port and Bingo - lucky me. ... Fuji FinePix A350 Digital Camera

I have a sony HVR-Z5U and shoot mostly in HDV. I shoot mostly wedding and events ect. and have a technical question on some settings for low light situations. My cam shoots crystal clear HDV in daylight, but indoors with low light the video when viewed on a HD tv is a bit grainy and cannot figure out if this is a simple setting or if it is even correctable. My general settings are 1.Manual mode 2.Gain set to 3db-12db. 3.My shutter is at 60. I adjust my iris to correct for low light but wonder if

... Digital Cameras

Hi I have a Canon PowerShot A460 and normally do notn have any problems at all. For the last few hours I cannot take any photos outside - all I get is a white screen. I can however take photos inside with the Flash. I realise that I have possibly changed some settings by mistake and have tried to set the camera to works settings but nothing has changed - I still cannot take photos. Can someone help me please??

Go into the menu and find "reset"...this will restore the original factory default settings and may solve your problem. ... Canon PowerShot A460 Digital Camera

Hai ..again ...i have try but ...still the same problem occurs ...i was shooting on Raw setting ...will that be the problem ? i cannot download the pic to picasa ....maybe i have to set the card to jpeg ..and later download to picasa ..pls advise ..asap tq..

Raw pictures have to be converted to jpeg. You need a program such as Photoshop Elements to do that. Until you do, shoot jpeg only. ... Canon Rebel XS / Eos 1000D Digital Camera with EF-S 18-55mm f& EF 75-300mm f Lens

Even I'm facing the same problem "I have a Nikon Coolpix s70 camera that I just recently received for Christmas. I cannot seem to figure out the best setting to put it on to take good pictures. They come out blurry and somewhat grainy. Any suggestions?" Can i know the reason for that and evn when i set to "auto" they come out very blurry and grainy. So I need a clear cut solution for this problem.

First of all i wanna ask one question, does your camera fell from your hand? usually this comes when your optical zoom motor is not responding to signals receiving from cameras processor. better service it with nearest service centre. ... Nikon COOLPIX S70 Digital Camera

On my FinePix s3100, cannot transfer picture from camera to computer. After setting the Usb Mode setting in the Setup menu, it reverts to picture read screen. Recent problem - all other settings are fine. Any suggestions - Thanks

Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Fuji FinePix S3100 Digital Camera

The lcd of my Panasonic Lumix DMC-FX01 became grey when i was taking photos. There is no problem with the photos though. The camera works without any problem. The problem is that the lcd is grey and i cannot see clearly the subject of the picture . I tried all the lcd settings but no luck. Thank you in advance for your time

Pls try to reset the camera to factory settingsperforma a software reset via the menu's using the settings on the 'play' setting on the dialif it doesnt help then u can buy screen here and get it fixed or u can fix ... Panasonic Lumix DMC-FX01 Digital Camera

The camera when switched on displays in the top lcd display 'Err' yet shows battery as fully charged. ive reformatted my memory card via pc. changed the lithium cr 123a batteries for new ones. fully charged the 4 x AA batteries. the aperture ring lock is set to 22 on the 28mm-80mm af nikkor d lens. i have it set to af and auto but have tried all other camera setting i can access. it will focus no problem yet will not allow me to do anything else. i cannot access the menu eg func, play, in

Hi.Err means that the camera is in fault mode. There is no code, so that the fault is generic. This kind of error is often associated with shutter problems or other loens error. If you have a spare lens, remove battery and test the spare ... Fuji FinePix S1 Pro Digital Camera

I'm trying to shoot HDR photos using my XSi/450D. From the menu two I've set the AEB EV step range as 0, -2 and 2. From here, though, I don't know what to do. If I go directly from the menu to shooting, I don't get any automatic shots, but rather single, individual shots based on the current exposure settings. Help. I've scanned my 45D manual, DVD tutorial, etc. and cannot find my missing step to create a series of AEB shots. Many Thanks, Robert

... Canon Digital Cameras

I need to know how to set the heating and water and for how long to have the water heating up for, for one person. So probably need a manual of some sort. Also my boiler is 11 years old and I have just tried to set up a british gas homecare package but they wont touch it because it is a powermax 155 and they say they cannot get the parts. What do you recommend i.e. yearly services or replace boiler or??? Below it will not let me enter my product, so I will enter anything just to post my problem?

Hi british gas will take nothing over 10 years on a contract so don't worry about that there plenty of gas fitters who will bo repiars on i,t hot water should be on for how much you are going to use 2hours in the morning longer in the evening its how ... Canon PowerShot A75 Digital Camera

FORMAT ERROR shows up in the window. Cannot take pictures, or review shots. Gateway DC-T50 Digital Camera The problem occurred after I tried to hook it up to my Mac computer to download pictures which I was unsuccessful at. Also fiddled around with the round setting on the top. It's now set on "A"

Hi,\015\012\015\012Remove the batteries wait a few minutes. Put fresh batteries back in and turn the camera on. This resets the camera.Then remove the memory card from the slot from your camera. Then insert back and check you will not be ... Gateway DC-T50 Digital Camera

I downloaded wallpapers from the Nikon website to my memory card. My problem is I cannot view them on my D60 camera. They are in JPG format but I cannot view them in the camera. I tryed other JPG pictures but the only ones that are viewable are the ones taken with the camera itself. Is there some setting that I'm missing. When I choose the Play All folders those pictures never appear.

Http://www.nikon-asia.com/web/Products/D40/Wallpaper/howto.htm\015\012\015\012\015\012\015\012as after downloading the wallpapers canno ... Nikon D60 Digital Camera

Flash problems Sony DSC-H9 My flash will not go off and when I try to change the flash setting it says FLASH SETTING CANNOT BE CHANGED

As you haven't said which shooting mode the problem occurs under (e.g. Auto, Scene etc) I can only suggest that you try different shooting modes to gain access to changing the Flash settings. Hope this helps. ... Sony Cyber-shot DSC-H9 Digital Camera

Cannot get the setting to change from "movie" to individual picture. I can't change the setting to take an individual picture and the manual does not cover this problem. Help!

On my Ixus 70, there is a slide switch on the back of the camera at the upper right side that selects still, movie, or review pictures, with icons of a camera, a movie camera , and an arrow in a box. If your camera has the same layout, then slid this ... Canon PowerShot SD400 / IXUS 50 Digital Camera

Card Problem When I put my card in it goes to (card set up) power off or format????? I have tried everything and cannot get rid of this I cannot take pictures. It was fine until I put card in computer and downloaded the photos, put it back in camera and now this is all I get, it is driving me crazy,,,,,,what is wrong??? I have even put new batteries in please help ASAP. [email protected]

Hey abbers,\015\012 What is most likely going on is your computer formatted the card to it, and the card needs to be formatted to work in the camera. What you should do is choose to format the card when you get the me ... Olympus Camedia C-3020 Zoom Digital Camera

Focus Problem I recently bought Olympus C-750. The real problem i have with it so far is that when I point the camera towrds the subject, its focus is adjusted automatically and the subject looks very focused and clear, but when i press the shutter button, the camera re-focuses and makes the subject blurr and in the end pictures come out very blurry. Kindly help me out with that, i.e: do i need to do some setting to avoid that??? and plus i cannot find the manuual focus option in the camera.

I have the C740, which I believe works very similarly if not identically. Unless you have the camera in full time auto focus, I don't believe it actually focuses on the subject until you've pressed the shutter button half way. Until then, the subject ... Olympus Camedia C-750 Ultra Zoom Digital Camera

Camera problems I can see the different setting symbols on the screen and when I turn it off and on I can see the canon pic it shows upon coming on. However, when I take a pictures I can no longer see the picture I am taken on the screen and although it appears to have taken the picture the picture turned out black. This starting taking place after my husband changed my settings I cannot figure out what to do to change it back. Please help.

This definitely sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info: \015\ ... Canon PowerShot A85 Digital Camera

YASHICA DIGITAL EZ F 527L NOT RECOGNIZE BY PC Respected sir i have purchased your digital camera EZ F 527L. i have used it and it is very smooth and very handy. but when i connected it to my PC it recognize it as unknown device and cannot install it by PC. my system is windows XP home.so please guide me how i can able to recognize and install camera to my PC ? i have another one problem that when i starts camera and set its anti shake function on anti shake it sets on anti shake. but when i swi

Video recoding not audio this camera ... Digital Cameras

Manual mode I bought a G9 and so far I'd had no problems but I tried to use the Manual Mode and found that the pictures it takes are almost black... I went over every setting, tried diferent sensibilities but I cannot find the problem. In the other modes Auto, P, Av, etc, it works perfectly fine. Can anybody help me?

I presume that when you select Manual Mode you are then selecting a suitable aperture and speed and ISO to give you a correct exposure? If you are then I guess this is a problem for Canon to sort out.\015\012Sorry if I'm teaching you to **** eg ... Canon PowerShot G9 Digital Camera

Dark LCD I have an A70, about a year old. The problem is the LCD screen is very dark. It is almost completely black unless I point the camera dirrectly at light. If I take a picture with the viewfinder the picture is exactly what the LCD screen looks like. This happened as we were using the camera. I also cannot view any of the pictures in the camera. I no the display is not completly out because it works to access the menu screen. It wasn't droped or anything. I can't find any setting to change

I have a sony cybershot dsc w730 , since a year. The problem is that over 2-3 months the LCD screen has become very dark. It is almost completely black unless I point the camera dirrectly at light. If I take a picture, the picture is exactly what the ... Canon PowerShot A70 Digital Camera

Some sort of problem with internal memory / battery? Each time I turn on the camera now it cannot remember basic settings like date etc and I have to select date and time before I can take a shot... Any ideas?

The internal battery needs replacing this is a circular battery . ... Sony Cyber-Shot DSC-H1 Digital Camera

I cannot get anything to appear on my LCD display or view finder other than menu information. Is this a setting or is there a problem with my Canon S2IS camera?

A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very b ... Canon PowerShot S2 IS Digital Camera

Lines Hi, I just bought my FE-280 camera and found that there are lines across every picture I take. You cannot see the lines when you are viewing what you are going to take through the screen but once you take the photo, the lines appear. Is this a setting problem or a fault in the camera?

Same problem with my canon a85 , fault ccd ! ... Olympus FE-280 Digital Camera

I have copied and pasted someone elses problem, because it is the same one I am having. So if I want to use the aperture for taking Manual photos I cannot do this because when it goes off of F22, it reads FEE, error. "I have nikon d80 with the fEE error code blinking... I know this means that the aperture is not locked at the 22 but it will not allow me to change the aperture settings. Please help us!!!"

Lock the aperture ring at its smallest opening (in this case, F22). Change the aperture setting by turning the subcommand dial (the one in front, unless you changed it in the setup menu).Of course, you can only change the aperture directl ... Nikon D80 Digital Camera with 28-80mm Lens
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2939 seconds