Having problems with your Digital Cameras ?

Canon powershot s500 will not switch to playback mode when I push the switch it doesn't change the mode always in shooting mode Help


Answers :

Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Canon powershot s500 will not switch to playback mode when I push the switch it doesn't change the mode always in shooting mode Help


... Digital Cameras

Hi, I have a Canon Powershot A700 digital camera and I am facing a problem with it. The 'Mode Switch' button, which changes the mode from Shoot/Record mode to Play/View mode is not working. Irrespective of whether the button is up or down it is in Shoot mode only. I am not able to download pictures to my PC as I cannot switch the mode to Play/View mode. Seems like a hardware problem. Can you please advise and help? Regards, Rohit Bajaj


If you have the manual for this camera turn to page 15.This tells you how to switch between Shooting Mode and Playback Mode.This is achieved simply by pressing the DISP button.This button is located below and to the left of the FUNC ... Canon PowerShot A700 Digital Camera

I can't seem to get my autofocus to work on my new Canon T1. The mode dial is switched to full auto, the fous mode switch is on AF, and the Image Stabilizer switch is in the "on" position. When I depress the shutter halfway, I get flash indication, some digital numbers, but no change in focus, no beeping, even though it is on and the focus confirmation light does not illuminate. I've searched through the manual to see what I am doing wrong, but can find nothing. Any help you can offer would


Hope I can help with some input to your problem. Let me suggest please that you switch the "mode" dial to "P" for program, check your ISO (I personally shoot ISO 100) and set it for a speed ISO 400 or lower. Most DSLR's use contrast to focus so a mir ... Canon EOS Digital Rebel XTI Digital Camera

I was taking pictures and was switching between different shooting modes; on the manual mode when i was changing exposure settings, suddenly a msg came on the centre of the screen saying 'Access...' and then is just not going. All the buttons of the camera have stopped working other than the playback and power button. Switching it on and off, taking battery and sd card out and restarting were the kind of things i tried but no luck. Please help.


Semiconductor chip for manual control may have over heated. Try using DC power supply to room temperature anneal the chip.Turn on playback for a while, until the camera does not heat up. And then try batteries fully charged to see if the chip can be ... Sony Cyber-shot DSC-H9 Digital Camera

Magenta cast For many months now I have been shooting products and artwork with a Canon 10D and 2 white lighting strobes with larg silver lined soft boxes.The problem I'm having is with a magenta color cast over the entire picture especially if I shoot red subject material.I have tried vast changes in parameters and white balance and nothing I do with camera settings seems to help, I must always resort to post processing in PHOTOSHOP CS. Could this be a 10D issue or ME?


Mostly it is probably you.\015\012\015\0121.) Use a Gretag-Macbeth Mini Color Checker in the first frame of your lighting set up (every time you change anything about your setup: move the lights ,change the softboxes, lower or raise the power setting ... Canon EOS-10D Digital Camera

Does anybody know how to turn ON the Digital zoom in Canon SX210is. Mine is showing always OFF in menu. How to change that setting? Digital zoom option is offline. I tried using all shooting modes( Auto, portrait, etc ) Thanks


... Canon PowerShot SX210 IS Digital Camera

Hi, I've just recieved my nikon d90 back from a repair and service, and although everything appears to be working fine, whenever I want to change shooting modes,( auto, P, M, flash off etc), they only work once I have selected them, and then turned the camera off and back on. In other words I cannot be shooting in the Auto mode and then switch to "flash off auto"....all that happens is that the auto focus works but the shutter will not operate. If I switch the camera off and on however, I can t


I'm going to assume at this point that the camera has been serviced correctly. What I'd suggest is that you look in your manual and find where you can reset your camera back to the factory default settings. Okay here are a few thoughts that might be ... Nikon D90 Digital Camera with 18-105mm lens

I changed the batteries in my Power Shot A720 IS recently when the low battery warning flashed, and had taken only two photos when the warning flashed again. I moved the mode switch to playback and the screen went dark "Change batteries now" appeared. I turned off the camera, set the mode switch to shooting, turned the camera back on and was able to take two more photos before the low battery warning returned and prevented any more picture taking. I purchased and installed new batteries and f


Hi, 1st you must use alkline bat or minimum 800 mhp bat....and if problem is not solved then cheak the bat cap and connection clean with aomthing,,,,If any thing else contact [email protected] ... Canon PowerShot A720 IS Digital Camera

Canon A510 Powershot camera will not stay powered on when I turn it on in picture-review mode. It comes on for a second --> Canon screen flashes on -- and then shuts off. In picture-taking mode, it seems to be fine. It stays on. But if I switch to review mode, it turns off. I've changed the batteries. It was fine last time I used it, last week. I left it plugged into the PC for a few days, if that makes any difference.


These cameras have capacitors built into the circuitry. A capacitor holds a higher voltage so the camera will operate when in use. Some modes in these cameras do need a higher voltage to work. The capacitor for the review mode is weak and will need t ... Digital Cameras

Zoom malfunction Hi, My cyber-shot dsc-w120 cant go to shooting mode. it always asks me to turn off and on after some unusual movement of the zoom lense. I can still ***** previously snapped pics when i re-play suggesting that its only the shooting mode that has a problem. pls help!


... Sony Cyber-shot DSC-W120 Digital Camera

No image on LCD screen, only irregular lines of varied coloring. When picture is snapped, it is of these lines--no image. Help. Details: I turned the camera to shooting mode but it does not display the image of what I want to shoot, but just a series of horizontal lines. If I take the shot, it shows the lines which were displayed on the LCD screen. If switched to playback mode, previously shot images show up fine. I checked the batteries; they were fine. I replaced them anyway, to no avai


I have the same problem and after doing research, I found this website. ... Canon PowerShot S1 IS Digital Camera

Hi, I have a Canon T2i Rebel. When i put the camera in "M" (totally manual), the image doesnt appear in the LCD screen. Everything else works fine in the monitor, but it is as if the lens where covered with the cap. But it´s not, and acutally all the other modes work fine. Only in the manual mode the image doesnt show, and the pictures also appear completely black. The menu shows sometimes something as if the exposure were less than -2, but even though i change the values for everything hig


That's great news, so let's write it up as a solution so that other people who search on here find the right information!So it appears that the Canon T2i when in manual mode (M) remembers whatever settings you play with, and that these se ... Canon EOS 550D Rebel T2i Digital Camera

Focus failure Hi. I hope you can help. I've a canon 40D and am using it remotely with the EOS utility v 2.3. I am only able to take an image when the live view mode is active. When inactive and I use either the shoot button or the timer, an error flashes up "focus failure". The camera focuses fine in live mode. Have dragged my way through the instruction manual and cannot find a troubleshooting section covering this problem. Hope you can help. Thanks Joe


... Digital Cameras

Scrambled image in shooting mode-Canon A85


It is problem of bad CCD Imager in your Canon A85 camera and ccd imager will be replaced to get correct picture in live view/ shooting mode.Canon will repair your camera free of cost. Click ... Canon PowerShot A85 Digital Camera

Canon 20D When ever I shoot in manual mode my counter does'nt subtract count correctly, if at all. If I start off with 999 shots and take 20 pics, it will still say 999. I put it in auto mode and it starts subtracting like it should. I have taken out my batteries charged them, switched cf cards and it still acts goofy in manual mode.


... Canon EOS-20D Digital Camera with 17-85mm Lens

Canon PowerShot S410 - Mode Switch Problem


Your problem is fairly common. However, fixing it will require someone to actually open the camera case and clean the rotating switch (mode dial). Also, I've never personally opened an S410, but it should be similar to what's posted on the followin ... Canon PowerShot S410 / IXUS 430 Digital Camera

My Canon EOS 350D camera was working just fine the last time I used it, but now it won't shoot any more. Everything else on the camera works just fine, it just won't take any photographs in any mode. I've changed the CF card but it made no difference. No errors messages appear, it does everything except shoot.


Remove the lens and put it back on. Go into the menu and find "reset"...follow the on-screen instructions. Let me know if it works. ... Canon Rebel XT / EOS 350D Digital Camera

I have a Canon sd630.The camera works great except that it won't remember its settings. Upon turning on the camera,it would say it's in manual mode, but if I change it to automatic and then turn it off. It would be back in manual mode again. I have reset the camera and even taken apart to replaced the internal battery. Still no luck. Appreciate any help. f.y.i I have tried looking for a firmware update, but no luck either. I was wondering if I could flash my camera with the sd500 firmware? I ju


Try to follow the route up the circuit from the battery on the motherboard.\015\012maybe the battery is ok but the power not rich to the mother board or memory chip.\015\012take more attention on the connectors. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

Hi, i have got a canon a300 and when i use the function button to change the exposure or awb in camera mode it keeps going from image quality and image size only, but when i use it in video mode it works fine. Can anyone help me please. Many tnanks Steve


In addition to camera mode, you may have your camera in one of the scene modes. Some of them limit the changes you can make. ... Canon PowerShot A300 Digital Camera

I have a Canon Powershot A550 and I recently dropped it on a night out. Since then, now matter how many times I have changed the batteries to fresh Alkaline batteries, the camera tells me to "change the batteries" when I turn it on and then switches itself off. Please can you help me?


The internal connection is damaged or circuit board is damaged . You try to tap on the sides of camera and check whether the message is disappeared . Also possibility that battery contact is damaged so try giving power to camera through p ... Canon Digital Cameras

Hi there We have a Canon Powershot A570IS digital camera, about a month old. Since changing the batteries once, the camera "low battery" warning light blinks every time the camera is switched on, and then it just cuts out with a "change the batteries" message. The new batteries are fine. They have been checked with a voltmeter and are giving spec of 1.5 V each. Any ideas? Thanks for your help Andrew James, Wantage, Oxfordshire, UK


Here are some simple things to try first for a camera that won't power on properly. They won't work for every case, but they're worth a try:\015\012\015\012 ... Canon Digital Cameras

Fairly brand new (less than 6 months old) Canon rebel xti - shooting in manual mode, then it gives a low battery message. I switch the battery and nothing. I recharge the first battery and install it, again - nothing. I removed the internal battery and left both batteries out for 30 minutes. Nada. I have barely even used this camera and I am furious. Is there anyone who knows what the problem is? If I seriously have to send it back under warranty already after shooting less than 1000 photos, I a


If its brand new and with less than 7 monthsof usage, you have to send it back and make valid the warranty.\015\012\015\012Such symptoms indicate a malfunction o the DC/DC voltage converter circuitry, and the camera has two of them locate ... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

Canon XTI Hi, my Canon is giving me pictures with swipes across the screen, the only mode i can shoot in is Av. The pics are still dark. I have the ISO at the highest setting. I heard the probklem could be as simple as a spec of dust but that sounds totally weird to me. Please help...


There are a few things to do in order to identify the problem more accurately. First, is it a "spot" or a "line" on the images. Second, is the "swipe" in relatively the same spot on multiple images. Are you using an external flash? In order to r ... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

Fujifilm A330 My camera is doing something rather strange; it's always switched on by sliding the front shutter open all the way, and it's ceased turning on when I do that. My dad and I figured out that we can get it to turn on by holding the 'on' button in the back, but it won't get out of the menu/blue 'no image' LCD display for reviewing pictures. In the past, holding the 'on' button was what changed it from picture review mode to picture taking mode, and since everything has swapped around t


My switch was dirty... very dirty. I took my camera apart (NOT SUGGESTED FOR THOSE WHO DO NOT KNOW) and cleaned it which was NOT the easiest job. I would take it in to get it serviced if youw ant to play it safe. Take it apart only if you expect to n ... Fuji FinePix A330 Digital Camera

Using my Canon XSi/450D, I'm interested in doing High Dynamic Range photography. But I can't discover how to make the automated shutter-speed range multi-shot (3 for the 450D) AEB work. I've gone into the menu and select and change the AEB range ( -2V) and pressed "set." Working from the "AV" in creative mode, I then set up my first shot with focus and ISO, and shoot. Now what? When I press the shoot button, an ordinary photo is captured, and if I continue to press the button additional cap


Click on this link http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=139&mod ... Canon Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3344 seconds