Having problems with your Digital Cameras ?

I have a SX20IS. Purchased a Speedlite 430EX. It fires manually, but I cannot get it to flash with any camera setting. Manual says slave and master must be on the same channel. I see how to do this, but what channel do I set it to and is camera the master and the flash attachment the slave?


Answers :

Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a SX20IS. Purchased a Speedlite 430EX. It fires manually, but I cannot get it to flash with any camera setting. Manual says slave and master must be on the same channel. I see how to do this, but what channel do I set it to and is camera the master and the flash attachment the slave?


... Digital Cameras

The flash on my Nikon D3000 won't pop up (regardless of the setting) and when I go into "Shoot" (from the guide menue) and then into "Easy Operation" the camera is set at No Flash but I'm not given the option to change the setting and says "The camera is now on "Auto No Flash Mode" but doesn't give me an option to change the setting there either. Can you help?


... Nikon D3000 Digital Camera

My flash is not working on my Canon PowerShot SX110 is camera. Help! My boss thinks the flash is turned off, but when I go to flash settings it says that red-eye and sync are both turned on. Basically I tried to use the camera outside the other night and the camera kept telling me to raise the flash even though the flash was up. The pictures were all blurry. I LOVE camera and am hoping for a simple solution.


... Canon PowerShot SX110 IS Digital Camera

When I fit the radio transmitter module from a set of Jianisi PT-04TM wireless flash slaves to the FZ50 it will no longer select all settings of apeture and speed. With the camera on manual setting the apeture freezes on f4 and the fastest speed available is 1/250. radio transmitter wasn't allowing flash to open fully, as it projected out over flash popup. I tried fitting an extension to mount radio transmitter higher and allow flash to open fully but still the same problem Fitting a normal


I've looked through the PDF manual for this camera and found the flash system pretty well full auto with the built in flash here is the manual link I used it's the fifth one from the top.http://www.google.ca/#hl=en&biw=1303&bih=818&q=pana ... Panasonic Lumix DMC-FZ50K Digital Camera

Flash Error Hi there, bought this camera about 6 months ago. I'm intermittently getting a problem with the pop-up flash. It pops up fine, but the screen gives me an error telling me it hasn't and won't take any shots. Have to keep switching it off and on and hoping it will work again. Sometimes it's a couple of days before it works again. It will take shots when I switch the camera to the 'no flash' setting, so it does seem to be just the flash. The error says that the flash release is jamming,


The error 5 can mean that there is something blocking the flash from popping up. If it is up but still get the message then you need to check to see if the little black pin/stick that lets the camera know that the flash is up, is not stuck. With the ... Canon EOS 400D / Rebel XTi Digital Camera

My flash quit working on my canon EOS 500D on every mode, when I go to flash control in the menu and click on built-in flash func. settings it says ... this menu canot be displayed. external flash is attached, but there isn't an external flash attached?


This camera is only one model period old, is it still under warranty? If so take it in for service. I'm including a diagram of the manual release button on the side of the camera for the flash. Try pressing this button to see if it pops up. If not th ... Canon EOS 500D / Digital Rebel T1i Digital Camera

Trying to change flash settings but says 'flash settings cannot be changed' with a warning triangle. I am in the 'Green Camera' setting on the dial on top


Hello. I have a solution for you. You have your camera set to "burst" mode, which does not use flash. Reset it to "single" mode and you will be able to change the flash settings. Regards, Joe. PS Please rate my answer. Thanks. ... Sony Cybershot DSC-H3 Digital Camera

My Canon A460 says the Card is locked. The lock switch on the card is set to unlock. I have another camera with a similar card. Both cards work in the other camera. neither card will work in the A460 both say Card Locked. It must be something in the camera. I have tried the turn off remove card turn on take picture. No card message. Turn off replace either card and see Card Locked.


Back up your data first,thenyou reformat the memory card in the camera.i guess you have formatted the memory card in another device.canon cameras generally do not accept cards that have been formatted in another device.then sitch off the camera and r ... Canon PowerShot A75 Digital Camera

When I turn on my Olympus FE-190 camera it shows the "card setup" screen with two choices: Power Off (highlighted) or Format, and gives a 3-ring alert sound. (It does this no matter what is set on the program dial: auto, guide, etc.) If I press OK to "set" with Power Off highlighted, it turns off. If I highlight format and press OK of course it warns me I'll be reformatting the XD card. When I attach the usb cable the screen on the camera shows PC highlighted but when I press OK it says "one mom


Fixed it by reseating the xD card. Voila! Back to normal. ... Olympus Digital Cameras

It is a mirror lens that i just received in the mail and I attach it to my camera and the camera says lens is not attached. I put it on manual and when i take a picture, it is a black photo. I put a manual flash and it takes 1/4 of a picture


I would think, that the "Contacts" that the camera uses to talk, and identify, with, maybe dirty or bad. This is a communication error between the lens, and camera. Have you tried "Resetting" you camera, with the lens attached? This may help. Are you ... Digital Cameras

My built in flash won't fire in dark sceneries, it worked fine a coupl of hours ago. Every setting is in auto, Is it related to other setings? The camera works fine in bright areas except during the dark due to the flash freezing the shutter. Can I fix this with setting adjustments? I already tried using the master reset but it didn't work.


HelloThank you for using FixYa for your problemAlways check the batteries first but if is it still giving the same fault, your camera is faulty. It should be taken to an authorized repair centre for a repair ... Nikon D60 Digital Camera

Still nothin'! Thank you so much for trying to help me. I know you must be a littletired of me. I may just be a long lost cause. This is what is going on.I have downloaded the driver. The driver shows up on my desktop.The battery and memory card are in the camera. I turn the camera on andinsert the usb cord, nothing. The camera is set up exactly like how thebook says. The VistaQuest picture comes on and stays in and so does thegreenlight. Once this comes on the camera's screen, you can hit any b


Hey thereLet try this before you go to Rite Aidthis I took from the camera manual, so make sure you flow the stepsFor Windows 98/me customers:Please install camera drive before connecting.1. Turn the camera and computer ... VistaQuest VQ-5010 Digital Camera

My zoombrowser program will not recognize when my camera is attached to the computer with the supplied cord. The computer recognizes that a camera is found, but will not let the program recognize it. Lately, I've also been getting the note: invalid class string. Then I have to uninstall the complete canon program and install it all over again. Then the program works, but still says no camera found. And, the camera is set in the mode to load to the program.


Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Canon PowerShot A95 Digital Camera

I have a Canon sd630.The camera works great except that it won't remember its settings. Upon turning on the camera,it would say it's in manual mode, but if I change it to automatic and then turn it off. It would be back in manual mode again. I have reset the camera and even taken apart to replaced the internal battery. Still no luck. Appreciate any help. f.y.i I have tried looking for a firmware update, but no luck either. I was wondering if I could flash my camera with the sd500 firmware? I ju


Try to follow the route up the circuit from the battery on the motherboard.\015\012maybe the battery is ok but the power not rich to the mother board or memory chip.\015\012take more attention on the connectors. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

HI! the flash of my canon sx130 stops working. I tried pressing the flash button but it would not change to the "flash on" mode, the icon always says that the flash is off. I tried different camera setting but still not working. Thanks!


... Canon PowerShot SX130 IS Digital Camera

Images I seem to get yellowish images and images that are really dark even when I put the flash on. The flash seems weak, almost defected. But then in the next series of shots it will work and the picture will come out just fine. All of this in the same setting with the same subject and everything else a constant too.  Help please, it seems like I must be doing something wrong either that or my camera is broken. P.S. it is brand new Amber


No that isn't it but I am not offended. The flash in fact looks like it goes off but at 10% of the full strength. I had other people try to take a picture to see if the same thing happened to them and it did and I saw them, they did not have their ha ... Canon PowerShot SD1000 Digital Camera

Nikon Coolpix L14 digital camera was dropped recently. Since then, when flash mode is set to AUTO, shutter-release button must be pressed several times to take a picture. If flash mode is OFF, shutter-release button takes a picture the first time pressed.


There is some misalignment within the camera that occurred while it fell. The possibility can be the trigger to the flash which was set off , there can be a crack on the electronic board, a possible switch issue of the flash trigger or a ... Digital Cameras

"Format Error" When I turn on my camera at the top right it flashed reading "C:13:01" and in the middle says format error. I've turned my camera on and off and even went into the set up, memory stick tool, then tried to format the memory stick. Notyhing has worked I need help. Thanks


Take an ereaser and clean the contact points on the memory stick. Then reformatt. ... Sony Cyber-Shot DSC-P32 Digital Camera

So...I want to connect my Casio Ex-s5 to my PC. The manual instructions say: turn on the camera, press Menu, then set-up tab. I don't see a set-up tab, only an "easy menu" with 5 optinos (FLash, self-timer, image size, etc). Where is the setup tab?


Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Casio Exilim EX-S500 Digital Camera

I have replaced the battery in my R707 (twice) but it won't take pictures. The message says "charging flash" and locks up the camera. The only way I can turn it off is to attach it to the computer and then turn it off. We have a big wedding upcoming and I need the camera to work. Please advise what the problem is and how or where to have it fixed. Thanks in advance. Susan Gillen


Here is a link to the HP support site, which you may already have read, but it gives specific instructions for performing a power reset of your camera, which is their preferred method for solving a problem such as the lock up you are experiencing... ... HP Photosmart R707 Digital Camera

Are there any settings on the camera that must be set before you can use the external flash feature?


Yes, set the camera mode dial to P, A/S/M or any shooting mode except the movie mode. Turn on the extension flash unit's power then select the camera's flash mode. The flash mode button on the camera controls the built-in flash as well as the extensi ... Olympus Camedia C-730 Digital Camera

Need owners manual for samsung tl100 digital camera. Every time I go to the samsung.com site and request manual, it finds it, then msg comes up from IE saying"IE must close now, please save all your work" or something to that effect, then I can't get manual. I was able to get the quick start guide, but not the full manual itself. please help, I've a reunion to attend in 2 days and I can't operate this camera and figure out the settings. Thanks in advance Shirl


You can download the required manual by clicking the link below:\015\012\015\012\015\012http://downloadcente ... Samsung Digital Cameras

Full Length Can you tell me what mode I must put the camera in to get a full lengthed picture. I have to go really far distance to get it done. The pictures comes out really dark and sometimes the flash is on and off. I dont know how to set up this camera period I lost my manual,can you get one to me.


... Mustek MDC-4000 Digital Camera

Olympus E300 Hi, I've just arrived in nicaragua without my manual. My camera won't let me take a picture on any setting, on the right corner of the viewfinder there is a flashing dot underneath which says white balance. Is this normal? Would hate to be without a working camera for the next 6 weeks of my holiday. Thanks, Kate


Hello Kate,\015\012See if you can find an internet cafe. I was reading the white balance section of your manual and there is nothing that stops your camera from taking pictures if the white balance is off. Turn your camera off, remove your batteries ... Olympus EVOLT E-300 Digital Camera

I have a Olympus X-560WP & when I turned it on, the screen appears with a P in the left corner, a red flash symbol in the right corner & it says on the bottom +1.0 1/30 F3.7. It isn't allowing me to use any of the buttons on the side or change any of the settings. I thought if I reset the camera it would fix the problem but it won't allow me to do that either. I'm on holidays at the moment & haven't seen any camera repair shops so I can't even take it there. Do you know what the problem is o


You can try to reset it by:1. Turn it off, 2. Remove battery (the big one)3. Remove the little round battery (which supply power to rom chip)4. Remove memory card.5. Leave it for 15 minutes. ... Olympus Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6402 seconds