Having problems with your Digital Cameras ?

Hi. I need a clarification of your previous answer: what is the "system" to which you refer? New Question: I cannot get my PC to read the Handycam videotape directly. Any suggestions? Format problem?

Answers :

\015\012The system i referred is the camera internal system(This is a automated procedure).I meant you can record video directly to both the tape and memory card while recording.
\015\012Here is the procedure to copy video from Tape to System and from system to Memory card:
  • Make sure you have a recorded tape and a “Memory Stick Duo” inserted into your camcorder.\015\012
  • Slide the POWER switch repeatedly to turn on the PLAY/EDIT lamp.\015\012
  • When you dub pictures as a still image Touch (Play) to play back the tape, then press PHOTO lightly at the scene you want to record.
  • Check the image and press it fully.\015\012
  • When you dub pictures as a movie
    Touch [MENU] ->(EDIT/PLAY)-> [ REC MOVIE]-> (Play) to play back the tape,\015\012
  • Then touch [REC START] at the point you want to start recording.\015\012
  • At the point you want to stop recording,touch [REC STOP] (Stop) .
\015\012Now the Videos and pictures would be automatically copied to the internal system and then copied to the memory crd from the tape.
\015\012It cant be copied directly to memory card, when you record video..
\015\012I mean you cant record directly in both the tape and memory card at the same time.
\015\012There are 2 ways to connect your camcorder to a
\015\012– USB cable
\015\012This method is good for copying video and sound recorded on a tape to the computer, copying files from a “Memory Stick Duo” to a computer, and copying files to a “Memory Stick Duo.”
Software is not required to copy files from a “Memory Stick Duo” to a computer. (You can connect your camcorder using the standard driver of the computer.)
\015\012– i.LINK cable
This method is good for copying video and sound recorded on a tape. Image data is transferred in more clarity than with a USB cable.
\015\012The CD-ROM (supplied) includes the following software:
– USB Driver
– Picture Package Ver.1.5.1
– ImageMixer VCD2
– “First Step Guide”
\015\012Install the software to play the video easily without any issue regarding formats
\015\012You can download the mnaual from the below link, which contains details regarding copying the Tape on page 84:
\015\012Please rate the solution only if your issue is solved, Once you rate the solution, we experts cant provide further assistance on the same problem..Sorry for things happened on the previous question..
\015\012If you need further assistance please leave comment and we will provide details explanation regarding the comment you place, and rate the solution inly if you were satisfied
\015\012Please leave me comment, if you need further assistance
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi. I need a clarification of your previous answer: what is the "system" to which you refer? New Question: I cannot get my PC to read the Handycam videotape directly. Any suggestions? Format problem?

Hi,\015\012\015\012The system i referred is the camera internal system(This is a automated procedure).I meant you can record video directly to both the tape and memory card while recording.\015\012\015\012Here is ... Digital Cameras

I just inserted a 8 MB card in and the camera says "Memory card needs formatting" I click continue, then it says "Formatting will delete everything on the memory card", no problem, it's a new card so I click on continue then it says "formatting" then I get the message that says "Memory card cannot be read, insert another card" What's the matter?

8MB or 8GB? If it's actually an 8MB card, you'll be able to put maybe two or three pictures on it, so I'll assume it's an 8GB card.The DX4530 is designed to work with SD cards. Your 8GB card is actually an SDHC card. While SDHC cards will ... Kodak EasyShare DX4530 Digital Camera

When I insert the CF card, and then turn the camera on, I get a reading that the card needs to be formatted. I then try to format the card, and it says that the card cannot be formated. I looked inside, and the pins appear to be fine. I just received the camera about a weeks ago, and have alreay taken photos with the camera, and had no problems with the CF card initially.

If trying another card doesn't work then reformat your CF card in your computer choosing a Quick Format option. Then place it in the camera, do an immediate card format in the camera. If you've got images on the card now DO NOT SHOOT ANYTHING on the ... Canon EOS-5D Digital Camera

I filmed 12 hours of footage (6 tapes) over two days using two different Canon XHA1 cameras in HD mode using Sony HD tapes. 4 of the tapes are fine but two of the tapes are not showing a timecode consistently and I cannot get them to read in the camera or a Sony playback deck. I also cannot get Final Cut Pro to read any footage off the tapes. This is a desperate situation as the two tapes in question have footage from an actual wedding ceremony on them. It is strange because they were used at t

There is no way that the cameras to be strangely set or something like that .. specially in the same time with only 2 of the cassettes ..so the only explanation will be either that someone messed around with them like a sick joke..or the tapes that d ... Digital Cameras

Memory card cannot be read... it is a Sanyo VPC-E760.. Get message saying card needs to be formatted. When I try that, I still get message that card cannot be read. What can i do to solve this?

Are you formatting the card in the camera as you're supposed to? ... Sanyo VPC-E760 Digital Camera

Formatting problems I have a minolta dimage 2300 that I can't get it to format.I put a new compact flash card in the camera and the screen keeps reading not formated,so I went throught the steps to format it and it keeps freezing up on the final step which reads FORMAT ? YES NO OK ENTER I highlite yes an press the enter button and the camera just freezes up,I can't even turn it off I have to wait untill it goes off by itself in 3 minutes.Can you give me a hint of what I can do???

Try formatting the card on a computer than again on the camera. If you don't have success formatting the card with a computer than it is a pretty sure thing that there may be something wrong with the card. ... Konica Minolta DiMAGE 2300 Digital Camera

When I start up my c4000 i get message asking me to format the card. When I do it reads Card read error. i changed to another card and get the same thing. Any suggestions?

Clean the cards with an eraser... or else would need to go to repair center ... Olympus Digital Cameras

When I put the memory card in the camera it says 'cannot read' it. How do I format the card? I know it has the right 'size' memory. The memory card I am using is the same one I used a few months ago and I saved the pictures I took to a computer and erased the pictures off the card. Now as soon as I turn the camera on it says 'This card cannot be read'. Im frustrated as there is nothing in the manual that seems to get my camera working again. I have only had it for a year. Please HELP!

Do not use the computer to erase the card. This is the reason your camera no longer recognizes the card. Now you need to format the card in the camera to get it to work properly. ... Digital Cameras

Card Problem When I put my card in it goes to (card set up) power off or format????? I have tried everything and cannot get rid of this I cannot take pictures. It was fine until I put card in computer and downloaded the photos, put it back in camera and now this is all I get, it is driving me crazy,,,,,,what is wrong??? I have even put new batteries in please help ASAP. [email protected]

Hey abbers,\015\012 What is most likely going on is your computer formatted the card to it, and the card needs to be formatted to work in the camera. What you should do is choose to format the card when you get the me ... Olympus Camedia C-3020 Zoom Digital Camera

Formatting c530 I have the same problem with my c530 as vikasdua. I am trying to format the memory card( 2GB) but I get the message on the screen that reads filesys error e00100. Does anyone know how to repair this problem??!!

Your camera will only accept a 1gb card Max! Go to www.kodak.com/support ... Kodak EasyShare C315 Digital Camera

I took my CF card out to get photos, went to put it back in and the screen read "There is a problem with CF card. Replace the CF card." I didn't think there was a problem with the card. But I replaced it anyway. Same message. I tried to format the new card and a message read err 99 turn it off and on and reinstall battery & put it back. I did all of that. Same message about the CF card.

Your CF pins in the camera are most likely bent/broken. This is a very common problem. Most repair shops will charge $150-$200 to repair this.\015\012\015\012Hope this helps.\015\012\015\012Wes ... Canon Rebel XT / EOS 350D Digital Camera

I am attempting to use "Eye-Fi" connect /x2 with my canon 5d. Since my camera accepts CF cards I am using the SDHC EYE-FI card in a SD/SDHC CF ADAPTER. (SDCF-01). When I insert the SDGC Eye-Fi card into the adapter and load ithem into my 5D, the camera first seems not to be reading the card and then gives message, "Card not formatted". When I attempt to format the card in my 5D, I get the message "Cannot format card". I formatted the card in my computer and again tried to use it but the messa

... Canon EOS 40D Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t

HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

Hi there. I suddenly have a problem focusing my canon digital rebel xt. I have done nothing different to it, but cannot get it to focus AT ALL now. I am a professional photographer so tried other troubleshooting routes that I thought might cause focus problems (i.e. not enough light; played around with the shutter speed, f stops. etc.). I also took battery out, and put back. I took lens off and put back on. Any other ideas that you can suggest that would be causing this problem? Thank you for yo

Have you tried cleaning the contacts on the camera body and lens where they meet with a cotton swab lightly dampened with rubbing alcohol? ... Canon Rebel XT / EOS 350D Digital Camera

Card Error None of my 3 memory cards are being accepted by my camera all of a sudden. I get a Card Full message, but when I try to view the images, the screen reads No Images. I've tried to format the cards again, but get a Card Error message. I've updated my firmware. The manual doesn't offer any suggestions for this error that I seem able to repair on my own. Any ideas?

If you are using a card reader for transfer to the computer, it is possible that you are corrupting your memory cards by accident (you have to make sure to eject the cards before removing them from the card reader). Try a new card and see if it will ... Olympus EVOLT E-500 Digital Camera

Polaroid i533 My Polaroid i533 doesn't seem to recognize the memory cards. It won't format and reads card error? I changed the card in my camera, (512MB, SanDisk), and now it reads "card error". How do I get rid of the notice on the screen? I had no problems with the previous card.

Check you camera instruction book. The card may be the wrong one or two large or??? ... Polaroid I533P Digital Camera

Cannot format new memory card reads: systen file error. I have bought 3 new memory cards for my kodak easyshare 315. each time i insert the new card i get a message that reads system file error. camera has not been dropped or come in contact with water

Go into the menu and find "reset"...follow the on-screen instructions. ... Kodak EasyShare C315 Digital Camera

Pentax A10 Have a three month Pentax A10 digial camera, with no previous problems. It now cannot read the SD memory card and won't take pics when the memory card is in the camera. This memory card will work in other cameras. Able to take a photo when the memory card is out of camera. Tried a different memory card - same problem. This happened after I took the card in to Walgreens to get some prints made. Can taking the card out of the camera and putting it back in damage the part of the camera t

Try another card in your camera but check the inside the card holder that you have not got a damaged connector in there. and format the card with the camera and not on pc. Hope that help you.jam ... Pentax Optio A10 Digital Camera

I have never had a problem retrieving pictures from my Olympus Stylus 730, I can open the memory card and drag the pictures to a folder on my computer without a problem. However, I cannot do this with video files. I can't even play them straight from the memory card folder on my computer (Dell PC). I tried opening them with Windows Media Player instead of Quicktime, the format they were in, and it allowed me to hear the audio but with no video. How can I convert these files so that they are read

Please download and install these two programs to the computer, after you have done so, the video should play back normally, and so should all if not most videos that you can find.\015\012\015\012\015\012First, install FFDSHOW video decod ... Olympus Stylus 730 Digital Camera

Sony Cybershot DSC-T700 USB connection will not work. Tried on several PCs and Macs. Always goes to message " USB Mode Connecting... Switch on [Menu] Each mode has the same problem. (PictBridge doesn't work to the priinter.) Have also tried a new cable with no luck. My question: Is there a way to get images off the internal memory to the Memory Stick Duo since I cannot get connected to an external device?

Hi there, i will give you the solve. First select those photos which is saved in internal memory. After that press menu button there you can found a option move the photos or send to memory card. Just select the memory card. Then your all internal me ... Sony Cyber-shot DSC-T700 Digital Camera

I have a new kodak easyshare c182 digital camera. The problem is that one out of every 6 or 7 picture I take, I get an error message that reads ''unrecognized file format''. Is there a way to correct this problem

Did you format the card in the camera before you started to use it? You can still do that but download any pics first since formatting will erase the card. ... Kodak Easyshare C182 12MP Digital Camera

Blank Screen I am having the same exact problem that is reported by Vinayak where I have opened my camera after a while and I get a blank screen. I can go the Menu and all the menu show up wihtout a problem. I just cannot take any pictures. I can see pictures that have been previously taken by this camera. Can someone please make any suggestions Regards, Sonny Bajaj

This is a CCD problem that Nikon is correcting at no charge - go here to find more details: http://www.imaging-resource.com/badccds.html\015\012\015\012Click on the Nikon link for a form to fill out. ... Nikon Coolpix 5700 Digital Camera

I have an error code on my Sony Handycam SDR-12 HDD. The code is E31:00. The manual says I cannot fix the problem. Do you know what the problem might be? It started as a format disk error. I reformatted the Hard Drive. The camera recorded fine, but the error code is still flashing.

... Digital Cameras

We insert a memory chip into our Kodak EasyShare C190 camera. The read-out informs us that the memory card requires formatting. We click on "OK." The camera goes into a "formatting" mode, then informs us that the memory card cannot be read. It goes back to the "Memory card requires formatting" prompt, we click on "OK," it goes back into the "formatting" mode, then tells us again that the memory card cannot be read. We can't do anything else with the camera until we take the chip out, then we hav

Your camera is only supporting SD/MMC Cards (up to 2 GB) and KODAK SDHC Cards (up to 8 GB). \015\012The card that you currently have might be faulty. Please try another card.You might also need to switch the camera over to saving pictures ... Kodak Easyshare C190 12MP Digital Camera with 5x Optical Zoom and 2.7-inch LCD

I received a vpc-e1292 and I cannot get the memory card to format. I've tried to do it thru my computer also but nothing is working. What could be the problem?

Can only turn the camera on if the memory card is removed ... Sanyo Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3848 seconds