Having problems with your Digital Cameras ?

I have a Bushnell Trailscout 5.0MP night vision model #11-9935C. I go thru the set-up mode and everything appears to be OK, but as soon as I set it to the on position it defaults back to password. Sometimes instantly are after two are three pictures.


Answers :

Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Bushnell Trailscout 5.0MP night vision model #11-9935C. I go thru the set-up mode and everything appears to be OK, but as soon as I set it to the on position it defaults back to password. Sometimes instantly are after two are three pictures.


... Digital Cameras

Blurry pictures My camera has two settings on the front. One is to take still pictures, such as flowers, the other setting is for action shots. My camera will not switch back to the action setting. There is a switch on the front of the camera. I have switched it to the right position, and it won't work. I have also taken the batteries out of the camera and switched it again. No dice. This sucks because I am missing a lot of good pictures of my kids. please help.


Hi:Try this... Go to the setup menu and RESET ALL. Then test.If this does not make a diff.then the camera may need repair.Here is a support you could call or email:Go to:\015\012http://vivitar.com/en-us/Support.aspx ... Vivitar ViviCam 5100 Digital Camera

My Nikon D60 keeps freezing up. Sometimes when I go to take the picture it works fine and other times, it won't take the picture but if I hold down the button it will eventually take after a few seconds. I've more than likely switched a setting but I don't know which one and how to set it back to the default settings.


Are you pressing the shutter button half-way and allowing the focus to lock before pressing the rest of the way? ... Nikon D60 Digital Camera

My sd700 is auto-metering light incorrectly and the pictures come out too dark. Sometimes simply re-framing/re-focusing the shot will make it work correctly, but not usually. Is it broken? Have I set something incorrectly? Is there a way to re-set the camera back to all its original default settings?


I have the same problem. Sometimes the camera works fine but sometimes it measures the light not correctly, or something like that. I'm not sure if it's only that it needs a cleaning inside, because when the light measuring fails the camera makes a d ... Canon PowerShot SD700 IS Digital ELPH / IXUS 800 Digital Camera

Battery Problem My 18-month-old Canon A70 is giving "change the battery pack" message and turning off constantly, even though I have fully charged three different sets of new rechargeable batteries and rotate them as soon as the message comes on. Sometimes with this message I pull out one charged set and put the same back in, and it works fine for quite awhile, then repeats later. I imagine this is a problem in the camera battery power circuit or something. Never happens when plugged into the co


I figured out the problem. My AA battery recharger was not making good contact, so although it said the batteries were recharged, this was not the case. After fixing this and getting full recharges, the problem went away. ... Canon PowerShot A70 Digital Camera

I have the Bushnell Trail Sentry 11-9302 game camera, 2.1 MP. I went in and entered the password, changed all the settings then powered it down. Turned it back on and now my password doesn't work? How do I reset the cameras password to the default password so I can get back into the setting so I can use the camera?


... Bushnell Digital Cameras

I have a Canon Rebel XTi which seems to "lock up" ie will not allow a second picture to be taken after the first when used in "portrait" mode. I was shooting a wedding with it last week and sometimes it would do this and sometimes it was OK. Sometimes it would shoot three or four consequetive pictures. Only turning it off and then back on would start it again. Sometimes even this did not work for more than ten seconds Is this a fault? Why does it only happen sometimes? I'm not sure if it do


Your memory card could be corrupt or not making a good connection. Try reseating the memory card and/or formatting it.\015\012Check the cards gold contacts to make sure they are clean also. ... Digital Cameras

I'd like to set my Stylus 790SW back to default settings in hopes that my video feature will work. Right now the video doesn't record. It's just a picture. I've been messing with this camera for 4 hours and cant get this thing back to original settings. Is there a magic trick? If I send this to Olympus to be looked at, it will be it's 3rd trip since to the New York repair shope since I bought it 2 years ago.


Roll the dial to picture mode, press the menu button and you will see "reset" on the left. Select "Reset" and say "Yes" - this will reset your camera to default settings. \015\012\015\012Here's a link to the manual if you need more help:\015\01 ... Olympus Stylus 790SW Digital Camera

My sony cyber shot dsc t70 just hasn't been taking great pictures. They're ALL ALWAYS fuzzy. I think it's because I've been fiddling with the settings. Can you tell me how to restore the settings or give me some advice on how to take great pictures with this camera? It's only two years old and I don't want to give it up too soon for a DSLR yet!


I'm having the same problem! Its been recommended on a number of websites to restore the factory settings and that might do the trick. You need to go to home, settings, main settings and select initialize to restore what the camera came with - that ... Sony Cyber-shot DSC-T70 Digital Camera

I got a new Bushnell Trail Sentry 5.0 mp and I can't get it to work. I must have entered a password and not know that I did. Is there a way to set the password back to default. I got past the password to go to the menu and now once I turn it on, it errors when I enter 0000 as the password. Can you help me, please.


I have the same problem the only solution I have been able to find so far is that you have to send it back to Bushnell with Proof of Purchase and they will reset it.\015\012\015\012Fuzzy ... Bushnell Digital Cameras

Grainy pictures I have had my Nikon Coolpix S8 camera for two years. At first the pictures were all very clear and I was very happy. But the last three months they have become very grainy and my colours, as they appear on pictures taken, are not true. Do I need to change some settings? If so, please advise giving me clear directions. I am camera illiterate. Please help me. Thank you.


There are many settings which may have been accidentally changed. I suggest that the easiest way for you to go back the factory settings would be to use the "reset" facility on the menu options. This will reset the camera to the way it was when it ... Nikon D50 Digital Camera with 18-55mm Lens

Downloading When i try to downloading some pictures from my computer that i have already downloaded from my camera, back onto my camera with a different memory card, i can only do one picture at a time. I would like to choose more then one picture, and it will stop detecting my camera after i choose two or three. help me please!


Null ... Canon PowerShot A530 Digital Camera

My D40 does not shut off properly, and sometimes turns on by itself. It seems to be getting worse, and sometimes I can only get it to turn off by putting the on/off switch in between the two settings. Also, sometimes if the camera gets left on I have trouble taking pictures the next time I go to use it (even if the battery is still charged).


Obviously something is wrong with the on-off switch. I would have it serviced. ... Nikon D40 Digital Camera with G-II 18-55mm Lens

When Mode switch is set to take pictures or clips, the camera shuts down in less than a second after I turn it on. If the Mode switch is in the far-left position (review pictures already taken), it stays on and I can see all the pics in the camera, but as soon as I switch to picture-taking mode the camera shuts down.


Since u say ur having difficulty reassembling the unit back.... please refer the following.... it shows disassembly procedures for a similar model camera... this is as far the closest i could find to help you reassembling the unit... just apply rever ... Sony Cyber-Shot DSC-S40 Digital Camera

Overexposed photos?? when i hit my shutter release button, sometimes the flash doesn't pop up and the view finder goes black. (it's like the camera is taking a picture but when I release my finger from the shutter release button it doesn't release) The only way to "get out of it" is to turn the camera off then back on. when i go to playback...it is a white picture. are my settings messed up and how do i avoid this in the future. Many picture moments are missed because of this!


The view finder "going black" on an SLR is caused by the mirror being up, which is also when the camera is actually taking the picture! The mirror sends the light from the lens to either the viewfinder or the sensor. When it's down, the light goes ... Nikon D80 Digital Camera with 18-135mm Lens

This camera was working fine, was turned off, and then a day later wouldn't work. The LCD screen on back works only if the Mode Switch is in the review mode (or DOWN), and does not light up under the picture taking mode (or UP) position. Also, while the switch is in the UP position, the ON/OFF power indicator button no longer stays lit. It does, however, stay lit in the Mode Switch in the DOWN position. First problem in three years. Nice little camera.


You may need to take it in to get it serviced or ntry out thees sights on the webhttp://software.canon-europe.com/ ... Canon PowerShot A520 Digital Camera

Lcd Hi. I was sure that the LCD monitor could be used instead of the viewfinder. I cannot find any information on how to activate that portion. All I can do is turn the LCD off and on and in the on position all it ever shows is the current settings. When a picture is taken it goes to the 2 second viewing and then back to the settings menu. I went through the manual and cannot find any advice.


Normaly, a reflex camera cannot use the LCD monitor as like a non reflex camera. Your camera was designed to be used like a film camera. The CCD panel at the film plane is sort of like having a film inside the camera. \015\012\015\012Ther ... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

I just set the date stamp in the on position. Then, turned the camera off as I didn't need to take a picture. Now, when I turn it on, the lense comes out and then immediately goes back in flush and the camera is in the off position. The battery is fully charged and the camera even does this when I have it on the charger.


Hi,How long have you owned the camera? If under a year then I would recommend having it serviced by kodak under warranty. If it's over a year old you may want to try a new battery otherwise consider replacement.Thank you,Lee ... Kodak EasyShare V1003 Digital Camera

I have digital camera olympus FE series. The problem started after i used the camera on the beach. Two days after the pictures that i took were blurred. Sometimes its clear but several days after the problem worsened. Even videos taken and all pictures taken were all blurred. I tried adjusting the setting but its still the same. One thing i noticed is when i focus the subject very near the lens its clear! What went wrong?I didn't got it wet but it was exposed to heat at the beach. Can this still


Yes can be repaired,it is the problem of the focusing unit of the lens unit. ... Olympus FE-230 Digital Camera

Pretty much constant but sometimes intermittant problem of the camera fe-210 screen goes black. all functions appear to be normal but it does not see through the lens. So everything is black on the pictures taken. It's like the opening is shut. Sometimes it will work when first turned on for one or maybe two exposures. then it goes black and may stay that way even if turned on and off or changing any of the settings.


Hi,Would you be able to View Recorded images / Video's ?If\015\012\015\012\015\012 yes, this is a Faulty CCD Sensor. This is a Common Problem on almost \015\012all the Brands like Sony, Kodak, Canon. There were Certain Recalls ... Olympus FE-210 Digital Camera

Auto focus no longer works. Every time I turn the camera on, I get the ''Please turn camera off and then on again message''. When I do that, it can focus in the default lens position, but as soon as I move the lens, it is not able to focus. Battery is fully charged. All settings were reset to default. Formatted SD, and upgraded to V1.2 software. Still no help.


Fast of all happy new year \015\012 your problem is only about your cam machanisam which is not adjast at right position you have to open it and rearange rightly.\015\012 for this you have to right tools for it or y ... Panasonic Digital Cameras

I can not get my camera to take clear pictures. They look blurry and the flash sometimes not make the picture as light as it should. I have spent many hours playing the the camera and reading the manuel just to become more frustrated. Is there a way to take the camera back to manufacture default and start over.


To reset the camera, put camera in camera mode, press menu and the reset should be on the left.\015\012\015\012Also if you have the image stabilizer on, turn it off.\015\012\015\012The last thing is the most digital cameras do ... Olympus Digital Cameras

I have a DXG-308 camera. I had over 200 pictures on a memory card that was in it. My husband pressed the "default" in the process of trying to change settings and the pictures seem to be all gone. Is there anyway to get them back?


\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012 ... Digital Cameras

My lens cover fell off of my nikon coolpix s210 and i have the three springs and the two parts that fell off i have tried to put it back together but i cant figure out how i need step by step instructions on how to put it back pictures would be great!


... Nikon Coolpix S210 Digital Camera

My Kodak Easyshare Z1275 has short battery life. sometimes even newly charged 2600 MaH batteries cause problems. Powers up, lens extends, opens screen to set time and date then powers down. Sometimes i can take a picture or two before it powers down. This is a known problem to Kodak but they want $90 to repair it. Can anyone tell me how to repair it myself. If I can't I will throw it away and use my Cannon exclusively.


Wait, do you have Li Ion batteries or Ni MH?\015\012\015\012I think that Kodak recommends Li Ion batteries which have a higher voltage on them.\015\012\015\012I got some generic Li ion battery packs off of Amazon.com, with bet ... Kodak Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4321 seconds