Having problems with your Digital Cameras ?

Camera lens will not retract camera comes on

\015 Camera lens will not retract camera comes on for just a few seconds than shuts offHave tried a new battery\015

Answers :

\015\012Fixing a Lens Error on a Digital Camera\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.\015\012
The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.\015\012
The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:\015\012
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.\015\012
Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).

\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.\015\012
Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Toshiba PDR-M700 When I power up the camera, the lens will not come out and sometimes will come out all the way to maximum zoom. When I power off with the lens out, it clicks as if something is stripped or loose. After shut down, I can push the lens back in. Once in a while the camera will work but eventually the "Lens Error" message comes up. This was a good expensive camera when I bought it but taking it in for service would probably cost more than the price of a new camera today. Can you sugg


It sounds as though the drive gear is slipping... If you give up on trying to repair your camera I may want to purchase it for parts (my sister-in-law broke my LCD display)[email protected] ... Toshiba PDR-M700 Digital Camera

I can only turn on my Cybershot DSC-N2 while the camera is in playback mode. I can look at the pictures and videos and change settings with no problem.. but when I try to switch to camera or video record mode the camera turns off by itself. Sometimes the lens will come out and then the camera powers down with the lens stuck out. Other times it just shuts off before the lens even has a chance to come out. The camera has never been dropped or damaged.


First press power button for 15 seconds .Then remove memory card from it may be your memory card has some issue.also press reeset button on camera some camera has reset button.start your camera without memory card. ... Digital Cameras

I have a Sanyo VPC-S1415 digital camera, the lens is stuck in the camera and won't come out. The camera will come on for a few seconds then shut off and it shows a side-view picture of a camera with the lens out with a red X over the lens. How can I fix this?


... Digital Cameras

I mistakenly dropped my digital camera a few inches when the lens was out.When i tried putting it off to know if the lens would go back in,it didnt move so i forcefully pushed it back inside.Now, when i try putting it on ,the green light flashes,then goes off and the lens attempts to come out but its like its stuck or something pulls it back inside.from what i noticed the camera cant come on without the lens coming out.pls i really dnt know what to do


You've likely jammed the zoom motor in the lens. You're correct in thinking that the camera can't work without the lens out. With it being physical damage repairs wouldn't be covered under warranty so you either need to pay to have it repaired (if th ... Digital Cameras

When I turn the camera on the lens extends, the camera beeps several times, the lens comes back in, then the lens extends again, the camera beeps then it shuts off without having the lens come back in.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Olympus Camedia C-740 Ultra Zoom Digital Camera

I have a Canon Powershot S3 IS and I was looking at picture I had taken and the lens was retracted. I switched to the camera mode and the lens started to come out and hit my leg and stopped half way. The lens went dark. I turned it off to retract the lens and then turned it back on. The lens came all the way out but the screen is still black and I could feel the camera and just barely hear it making the noise it makes when the lens is coming out but it was already all the way out. I switche


Format ur memory card ....and replace the cells.....might work...contact the customer care for help ..they mightr be able to fix it ... ... Digital Cameras

EX-S500: * I turn it on and the 'Adjust' screen comes up. *I press the 'Menu' and the lens comes out, the green light flashes for awhile, it beeps a few times, it grinds a few times and shuts off. The lens stays out. *I turn it back on, the lens goes back in and the 'Adjust' screen comes on. * I press the power button and the camera goes off. *I left the camera in the charge gradle all night and the battery did not charge. *Help


You could have a power and lens issue, going on at the same time here. There's a couple of web blogs that delineate things you can try to correct these issues, and here they are:\015\012 ... Casio Exilim EX-S500 Digital Camera

Hp945lens When I fix a wide angle lens to my camera and switch it on, the zoom tries to come out, fails and then turns the camera off. I'm assuming that because the screw-on lens is on the outer fixed lens this is stopping the zoom from coming out which then turns the camera off. What am I doing wrong?


Hi Do you use a lens tube? You need one of these so the lens does not hit the screw on lens when it extends. Quite cheap on ebay etc. Standard 55mm thread.Hope this helpsjbrevealsall ... HP Photosmart 945 Digital Camera

Lens Error When I turn on the camera in any mode except play back, the lens will come out as if it's coming on but then the lens' go back in and the camera shuts down. The batteries are fully charged and the camera has not been damaged in any way.


I am sorry to say but you have a physical issue with the camera. Your either going to have to take the camera apart yourself or bring it in for service. Try working with their support \015\012\011\011\011\011\011\015\012\011\011\0 ... General Electric A835 Digital Camera

Dropped camera Camera dropped while lens was out. Lens was knocked crooked. My son attempted to push the lens back to center it and we heard a piece on the right side click or break. Now the lens wobbles, but retracts. However, the lens comes out halfway between wide and telephoto, have to move it back and forth, or shut off and sometimes it comes out to wide. Pictures are still great. Ask Kodak for help and they wanted me to send it to them and then give me a certificate to take 15% off a new c


Lens won't come out and lens cover won't open. New battery what do you do to make it work? ... Kodak EasyShare CX7430 Digital Camera

Camera stalling The problems started after using my camera on a windy day at the beach 3weeks ago. After a few days, the lens started getting stuck, and wouldn't come out, or if it did, didn't focus properly. This problem was intermittent. Then, in the past several days, the camera systems stall when I switch it on. The lens comes out and zooms fully. but It will not respond to any of the control buttons. Which part of the camera is the problem? is it fixable? How much is the estimated cost of r


This problem is related to your lens , because even if the lens extend fully and for the past things that happened on the camera there's a big chance that some dirt get in to the camera that causes the problem. What you can try first is to take the b ... Panasonic Lumix DMC-FX7 Digital Camera

Lens won't come out to focus. Camera was dropped lens appears to be in tack and the lens does attempt to zoom when you hit the button. Is the camera doomed? Or had the lens simply come out of its tack?


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Fuji FinePix 2600 Zoom Digital Camera

LENS ERROR When I turn the camera on I can hear the lens tring to come out, but it wont come out at all, then it says Lens Error and then the camera turns off. Helllp


This is probably THE single most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... GE A730 Digital Camera

Hi welcomejee, I read all your solutions regarding the digital camera Sony DSC N2. I really have to thank you for your precious Some of the problems are very similar to mine: After the camera fell on the ground from about 2 meters in off mode the lens would come out and immediately back in 4 times in a row. After that the lens is back in, a beeping sound comes up and on the display it is written to "Turn the power off and on again". Of course that does not help at all. The lens is opening


George, this is most likely a lens issue, and more precisely, probably a stripped gear when it fell. You will have to disassemble the entire unit to get at the lens assembly, and will probably be a professional by the time you get through! ... Digital Cameras

Lens trouble My lens will not come out entirely on my camera, for when I push the button to turn it on, the lens tries to completaly come out but then quickly retracts back halfway and remains stuck about halfway open. The screen is black and the light flashes red everytime I turn on the camera, along with a noise of something stuck. I have tried using that little button that someone told me was the reset button, along with plugging it in, and charging it. None of this has helped me with fixing


Appears to be a repair issue... lens track may be off ... Olympus FE-280 Digital Camera

I am able to transfer images to my computer, but when I try to turn the M893 camera on when it's not connected to my laptop, the screen comes on for a second or two, lens comes out, green light is on and then blinks and turns red and blinks and then lens goes back in and camera turns off. I've tried removing the battery, wiping it off, putting it back in, camera also wont charge. It's never gotten wet or been exposed to extreme heat


It has problem on the lens. Lens doesn't extend when transferring pictures that's why it works. Kodak cameras are designed to automatically shut-off when the lens is struggling to go in or out.Follow step-by-step solution and repair on ww ... Kodak Easyshare M893 Digital Camera

I dropped my camera GE j1050. i camera lens won't come out anymore.... it's coming out halfway .... getting LENS ERROR everytime i turn the camera on.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\01 ... General Electric GE J1050 Digital Camera

Hi I my new(3 months old ) PowerShot SD1300 IS camera has a problem. Initially worked fine ,but suddenly it is not working. Issue is it will power up only once after many (5 to 6 hrs) put idle.When powerd on , lens will come up and the camera will go of,lens will remain out.It wont respond(power led also goes off).Again if we put idle for some hours when we press first lens go in ,comes out and again goes off. Please let me know what could be the problem.I checked it is not problem with battery


Hi. I\015\012 note that you have checked the lens and Canon service has said the PCB \015\012needs to be replaced, but the cost is too high. However you have asked \015\012if there is anything else you can do. ... Canon Digital Cameras

Lens Stuck My Lens is stuck on my Coolpix S200 and I'm getting the Lens Error message. I tried to push it back in like I read on here and it went partly in and now its completely jammed. I've only had my camera for about 4 months. Please help!! I'm hoping to fix it myself. i dropped my camera and now the lens wont come out. Everytime i turn on the camera it tells me to turn it off then on again. I've done it multiple times and it doesnt work. I tryed to push the lens in and out but it doesnt ma


YOU CANNOT REPAIR THIS SOPHISTICATED CAMERA YOURSELF!!\015\012I guess pushing the lens inside may have made the problem worse.\015\012I follow a rule- if you drop an electronic equipment and a problem occurs- it usually takes a profession ... Sony Cyber-shot DSC-S700 Digital Camera

Lens problems I am deployed and I sent my camera to my wife and she has managed to brake it, I was hoping to get some help on this problem: When off, the camera lens is in the position as if it were being used. When turning the Canon Camera Powershot A530 on, the Canon logo screen comes on as it should. Following the blue logo screen is 2-3 rapid beeps made by the camera and a black screen is shown with the words, "Lens error, restart camera". Immediately after showing this screen for five


Try opening your camera, check the lens gear if its teeth are\015\012complete. If so, check if something stucks on it. Its much better to\015\012bring your camera to an authorized service center to re timing your\015\012lens track... ^_^ ... Canon PowerShot A530 Digital Camera

Lens error When I try to zoom the lens, it comes up with a lens error. We just got back from a trip to the beach, where my daughter accidentally kicked up sand while she was running toward me and I had the camera ready to take her picture. When I power up the camera I can hear a gritty sound when the lens extends. I've cleaned up the rest of the camera, but don't know how to get the sand out of the lens housing.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will hav ... Canon PowerShot S3 IS Digital Camera

Y have a ixus 60, no I got the " lens error, restart the camera" When I sart the camera, I nowt hear nothing a then comes the piepie with Lens error, restart camera. This happend when whe make pictures yesterday, I push the camera in my pocket, after then whe got "lens error.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Lens Error When I turn camera on, green light flashes and a message comes on screen: Lens error, restart camera. The lens is permanently out. Have not dropped camera, don't know what's happened and am not very technical so don't even know how to restart camera! Can't find anything in the Basic User Guide to help me.


It is just telling you to try to turn the camera off and back on. This usually doesn't self correct and will need to be serviced. I would call Canon for support and see what the options are for service or upgrade.Hope this helps! ... Canon PowerShot A460 Digital Camera

Lens error My zoom will not work. I can take pictures if I don't zoom, but as soon as I try to zoom in, the screen goes black, the camera beeps a few times and a message that says "lens error, restart camera". However, upon restarting the camera, nothing changes - it still won't zoom!. Also, when turning on the camera, when the lens first comes out...it sounds funny, like it is puttering. Help?


Powershot S3 IS: lens error message, lens juddering on startup but not \015\012coming out. Tried all tricks on internet without success, so decided to \015\012dismantle camera. Localised fault to optical position encoder on first \015\012transfer gea ... Canon PowerShot S3 IS Digital Camera

Lens error I tried to turn off my camera, (Digital Ixus 60) and the lens froze halfway closed. When I tried to restart the camera, an error comes up on the screen, saying LENS ERROR, RESTART CAMERA. I had this problem before on this camera, but while it was still under warranty. I sent it to be fixed, but now it seems the problem isn't fixed. Is there anything I can do now?


The only thing is, is that it is past it's warranty. THE WARRANTY ONLY COVERS DEFECTS, AND FACTORY ERRORS. \015\012\015\012IF THE LENS DOESNT GO BACK IN, THEY CANT FORCE IT AND YOU PAY THE FULL COST OF THE ENTIRE LENS BEING REPLACED AND T ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3104 seconds