Having problems with your Digital Cameras ?

It looks like one of the pins is bent do i need to replace the card slot to stop the error 99 CF


Answers :

You need to have the bent pin repaired.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

It looks like one of the pins is bent do i need to replace the card slot to stop the error 99 CF


You need to have the bent pin repaired. ... Digital Cameras

CF error I own a Canon 400D. It worked perfectly until today. I inserted the cf card, and turned on the camera. It took a couple of seconds to light up, and I got a message that the cf card was faulty and needs to be replaced. I used another one...it said the same thing. I tried reformatting. It gave me an err99 and then said that "shooting is not possible" I formatted the card on the computer...no luck. The pins are in place, I checked. What could be the problem and how could I go about solving


My canon xti had the same reading cf card error 99.\015\012Since my camera is out of warranty. I had to find a way to fix it. After reading all possible solutions in this site, I looked at the pins (that used to connect to the CF card) and foun ... Canon EOS 400D / Rebel XTi Digital Camera

Card error I have a e-1. Two memory cards with 1 and 2 gb. I get a "card error" message when I insert either into the camera. I brought it to one camera shop. They said that a couple of the pins (that connect the memory card to the brains of the camera) were bent. Recently took it to another repair shop and he inserted a card with less memory and the camera worked. Is it the cards or the camera? Will the camera work (with bent pins or whatever) if I get a new memory card?


1. Ensure batteries are fully charged.\015\0122. Look carefully between the lens and the camera body for any sand, dirt or any damaged etc.\015\0123. Try turning the camera with the lens facing down and shake to dislodge anything stuck ... Olympus E-1 Digital Camera

Bent pin in card slot , i have bent one of the pins that fit the compact flash card is there any one out there with spares to repair, ta steve


This is not a consumer repairable problem. Take it to a professional. If it's just a bent pin (not broken), the repair shouldn't be too expensive. ... Digital Cameras

Canon 10d digital camera Err 02 message - CF card error Have tried multiple CF cards in this camera with same result. Cards all work fine in my other 10d and in card readers / media players. Checked CF card slot - no bent pins. any ideas?


Most likey your problem is the cf card reader when ever the camera was made they could have not heated up the board all the way causing a cold solderjoint after time this joint becomes week and gets disconnected on the back side no visual damage is s ... Canon Rebel XT / EOS 350D Digital Camera

Canon Rebel Xti won't read ANY memory card. ''There is a problem with the CF card. Please replace the CF card.'' So i went out and bought a new one, the same message still appears! The prongs inside the camera look like they aren't bent or anything. Please help


It can be very difficult to see if the pins are bent, and harder to see if any have broken off. Do not probe with anything that can bend the pins. I suggest you create a small tool from a strip of paper and a toothpick. Pass the strip of paper ove ... Digital Cameras

One of the pins in my sd card is bent over and it will not read the sd card, I am an electronics technician by trade, is replacing the sd card reader a very complicated repair?


Please clarify - if the bent pin is on your SD Card, why would you want to replace the card reader?\015\012\015\012If you're an electronics tech, you must have a good selection of tool ... Canon EOS 400D / Rebel XTi Digital Camera

1 pin bent resulting in "Card Error" message. Attempt to straighten pin broke it off! Camera now appears to work well. What other problems might this missing pin create? Should I keep the camera or replace it?


Some of the CF card pins don't do anything. It could be one of those that broke. If, when it was bent, it shorted one of the other pins, that may have caused the "Card Error". Removing the pin may have no negative effect. ... Olympus EVOLT E-500 Digital Camera

Somehow when I put the CF card in, I bent one of the pins all the way down. Not sure if it can be straightened or it might need new set of pins.


HiNot sure what model you have, but the answer can change depending on model.You can definitely try bending the pin back straight by sticking something down there; hopefully it won't snap off and all will be well.I ... Canon Digital Cameras

I have a Olympus C-750 Ultra zoom camera and I suddenly the camera stopped working one day. Now when I turn on the camera it says format memory card, but then when you select yes the camera shuts off and when I turn it on again it says photo chard error and shuts off again. What is wrong with the camera and what can do to remedy this? Will replacing the photo card help?


The memory card may be defective, try another, if that cures the problem great, if u get the same message then the camera has failed and you will need to send it in for repair to a Kodak service center, there is nothing u can do to fix this, Kodak do ... Digital Cameras

I have two cameras a95 power shot canon #1camera one of the pins in the memo card slide is bented need to be fixed, #2 camera pink pictures and some dirt need service where shuld i go to fix it


For #1:\015\012\015\012\015\012http://camerarepair.blogspot.com/2009/06/fixing-compact-flash-memory-card-error.html ... Canon PowerShot A95 Digital Camera

How can i replace the cf card slot on a canon powershot A80, one of the pins have broke off.


... Canon PowerShot A80 Digital Camera

How do i straighten a bent pin in the card slot?


... Kyocera Finecam S3L Digital Camera

Hi my memory card was reading memory card error, i realised there was a bent pin, the pin is now fixed and it is still reading memory card error, is there another solution???


Try to format it and if it still comes up then you r memory card is shot ... Canon PowerShot A95 Digital Camera

Memory card Our old memory card stopped working in the camera. It said "memory card error". I bought a new card, 8gb duracell sdhc card, and when I put it in it said"memory card error" again. I tried formatting the card but it would not allow me to. I put the card in my computer and the new one works fine. I gave the old card to my brother in law to look at it, but he is on vacation, so I can't test it in my computer. I put the card that came with the camera in and it works fine, but it is a mmc


Unfortunately, the A520 does not support SD memory cards with more than 2GB capacity, and doesn't support SDHC at all. (1GB max for MMC cards.) I know memory is much cheaper than when the camera first came out, but in 2005 2GB was about as large as y ... Canon PowerShot A520 Digital Camera

I bought my Kodak Easyshare C310 a few years ago and has been working fine. I bought a new SD card as lost my old one, and when I inserted into the camera it said the memory card was full (wasnt as brand new) and that it needed formatting, and error showed FILESYS ERROR E00100. What should I do? or should i just buy a new one? Thank you


Hi thereCheck to make sure the cards write protect is\015\012off, take the card out of the camera, face the card towards you, look\015\012for a small white tab on\015\012the left hand side of the card, to unlock it push the tab down, it will\01 ... Kodak EasyShare C310 Digital Camera

How do i repair canon EOS bent pins on large memory card slot? memory card was forced in and bent pins at bottom


... Canon EOS 400D Digital Camera

Card Error I have an Optimus 8.0 camera with a Kodak 2 gb memory card. I took many pictures on the card, and viewed but never download the pics...I went to take another picture and got a card error... Acts like all pictures are gone and card needs to be formatted. Is there any way I can retrieve the pics that were already on the card. I hope I haven't lost all my pictures.


Use a card reader to download your pictures to a folder you create on your desktop. Then, format the card in the camera. Next time, don't wait so long to download your pics. ... Digital Cameras

How to replace pins in the cf card slot of an Olympus e500 dslr camera?


... Olympus EVOLT E-500 Digital Camera

Nikon D40x meomry card slot Error: " This memory card can not be used, it may be damaged. Use another card." I tried another card but got the same message. Also, I need to push it hard to insert and loack. I think it is a slot problem...Help.


This is a built in problem with meory slot in some kindly repair the slot spring from service centre ... Nikon D40x Digital Camera

Canon EOS 400D - Error message - There is a problem with your CF card- needs replacing. We have original card and also replaced with new card - message keeps appearing. What else could this mean?


Look inside the card compartment to check for broken or bent pins. Have you tried formatting the card in the camera? This will erase it so download any pictures first using a card reader if necessary. ... Canon Digital Cameras

CF card error replaced the card and tried to format but still reads cf card needs replaced


More than likely one or more of your CF pins in the camera are bent/broken. This is a very common problem. Most repair shops will charge between $150-$200 for this repair.\015\012Hope this helps\015\012\015\012Wes ... Canon Rebel XT / EOS 350D Digital Camera

Frame error Turn on and take photo and then a message comes up saying "frame error" and then Even shutting the camera off. When turning it back on it still says "frame error" . When you take several photos you only end up with a very few on the memory card. What is the problem and how can i fix it? I cant view any of the photos. I replace camera with a new battery. Could it be my SMART CARD. Need help! Fuji MX-2900


... Fuji MX-2900 Zoom Digital Camera

System Error I downloaded the pictures onto a CD from my Konica Minolta today like I always do. When I was finished I went onto the camera to delete the pictures and format the card - like I always do. (I have had this camera for right at 1 year) When I turn the switch to the "view" mode it comes up with "system error" within about 2 seconds and the whole camera turns off. If I go really fast I can delete one picture at a time. I can still take pictures and they still show up (for 2 seconds).


Same thing happend to my father's camera (memory card). Seems that deleting the pictures from the card via the computer solves the problem. Corrupt files on the card cause the camera to read system error. No corrupt files = working camera! :) ... Konica Minolta DiMAGE Z5 Digital Camera

ON MY CAMERA SONY CYBER-SHOT APEARS A MESSAGE LIKE THIS ERROR c:32:01 AND IS ONLY WITH ONE MEMORY CARD, BUCAUSE WITH THE OTHER ONES MEMORY card do not, DO NOT APEAR THAT MESSAGE


You might try to format this memory card and start from a newly formatted, blank memory card.\015\012\015\012-a. ... Sony Cyber-shot DSC-T77 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4027 seconds