Having problems with your Digital Cameras ?
Printer isn't working correctly
\015 My easyshare printer dock seris 3 suddenly began printing only the bottom half of the photo.. it gave no prior warnings to the problem.. also the dock is very loud like it is laboring to work\015
To resolve this condition: \015\012
If the problem persists, call 18002356325 to send camera for repair
- Remove the power cable from the printer. \015\012
- Remove the paper tray from the printer. \015\012
- Remove the paper from the paper tray.
- Verify that the paper you're using has KODAK XTRALIFE Paper or a "G" inside \015\012a circle (for G600 series printer docks) on the back. Do not use 4- by 6-inch \015\012inkjet paper. \015\012
- Insert the paper tray into the printer. \015\012
- Open the color cartridge door, then remove the color cartridge. \015\012
- If the color cartridge ribbon is torn or damaged, replace it with a new \015\012cartridge. \015\012
- Install the color cartridge, and verify that it is fully engaged. \015\012
- Close the color cartridge door. \015\012
- Connect the power cable to the printer. \015\012
- Wait for the printer to initialize (the paper may eject automatically).
If the problem persists, call 18002356325 to send camera for repair
Repair Help & Product Troubleshooting for Digital Cameras
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I have a Polaroid digital camera I got in May that came with a PoGo printer. It all works fine, but I've misplaced the manuals, and when I go to import photos to my Mac, I get nothing. I don't know what the correct "mode" is to import, I've never had this problem before with any camera and my Mac, usually it instantly shows as a source. Do the settings for the PoGo printer disable the Mac to connect as a source? If so, what "button" do I push to allow it to be recognized. It's a pink Polaroid, 1
Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Polaroid I533P Digital Camera
Printer isn't working correctly
To resolve this condition: \015\012\015\012Remove the power cable from the printer.\015\012Remove the paper tray from the printer.\015\012Remove the paper from the paper tray. ... Digital Cameras
Can't download pictures from camera to laptop. Never had a problem before. It states USB is not recognised, bought a new USB lead & it still doesn't work. USB card reader doesnt work on my laptop. Re-installed laptop (vista) and it still wont download. sent camera for repair and got it back and it still doesnt work. phoned canon and they havent a clue and are looking into it. I have found a temporary work around by putting my flashcard in my printer and downloading via the printer but you need a
Let's go all the way back to your card reader not working when you plug it in. Are you sure? Sometimes you have to open "my computer" to find it...it will be a removable drive. ... Digital Cameras
Ok my second time asking this here are the details: Samsung i85 digital camera demo for pmp works but will not play my media that i put into the pmp folder. files are not corrupt because they play on the computer files are correct format for this device file setup is correct. SD card is good All looks in working order untill want to view my files with the pmp player it says "no file" everything else works fine. I am thinking it may be some kind of driver that is not installed in the camera to
If you are certain the the file is working on your computer, then save all of them in computer. Then reformat the SD card from the camera. after that, try to take some pictures then to record video from the camera to see it can play ba ... Samsung i85 Digital Camera
Ihave an Epson 1290 A3 Printer which was working Fine I then left it for 6 weeks due to holidays, on return it wont work the Green Power light comes on the off and the Red Ink light stays on. I have tried to rest the counters with the Epson Soft ware which I purchased, No good, Im very reluctant to get rid of such a wonderfull printer Which I use for printing Photograthic tasks,Can any one help with a solution?
... Digital Cameras
I have Panasonic Lumix DMC-TZ7 Digital Camera. i have been using camera since 10 months. now i have problem in zoom'er. it is not working correctly. seems like spring action is not correct, it gets struck and Zoom-in and Zoom-out wont work smoothly as before.
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\ ... Panasonic Lumix DMC-ZS3 Digital Camera
I recently purchased a hp photosmart all in one photo studio printer and camera. It cost me $200.00 to get the printer hooked up and it is still not working properly. I went to activate the camera on the weekend and it does not work. I am not a tech type of person I am totally frustated What do I do???
I returned the printer and camera to the vendor. I really did not feel the $20.00 fee was justified.\015\012\015\012Des Keon ... HP Digital Cameras
I have a JVC recorder DR MV150B and I am trying to download a movie, but the disk i have is a SONY DVD+RW and the manual indicates that I neeed DVD+RW disks manufactured by MITSUBISH, or HP, or VERBATIM. First, will the SONY DVD work in this recorder. If not, where can I find the correct DVD> I have been to Radio Shack, Target, and walmart and none of them stock rhe ones listed in the manual. If the SONY wiill not work, where can I order the correct DVDs.
Just pay attention not to damage the video footage during the operation and you can try with the one you have if it is a DVD + RW ..I think you should format the DVD first and after that record on it ..It doesn't really matter the manufacturer as lon ... JVC Digital Cameras
I just purchased a Kodak printer to print my digital pictures. When I try to look at the pictures wheather the memory chip is in the camera or directly in the printer it will only read 46 of the 200 or - pictures on the chip. The chip is fine in my old Lexmark printer and my chips from my old sony camera work fine in the new printer? It is a Kodak 5300 AIO printer
Try to sort your pictures by folder. On your computer, open your pictures on the chip. Create different folders like 3 to 4 folders and distribute your pictures there. Then check if it your camera or printer can read all 200 pics. ... Fuji Digital Cameras
Shutter button does not work on SP-500UZ. Zoom in/out works sporadically (sometimes it jitters a little when zooming). It was working fine until last weekend, when it just stopped working. When I press the shutter button it does appear to correctly adjust the focus, but it will not actually take any pictures.
What about the menu switch, manipulate it, see what that does. ... Digital Cameras
Canon powershot G6 Can't download pictures from camera to laptop. Never had a problem before. It states USB is not recognised, bought a new USB lead & it still doesn't work. USB card reader doesnt work on my laptop. Re-installed laptop (vista) and it still wont download. sent camera for repair and got it back and it still doesnt work. phoned canon and they havent a clue and are looking into it. I have found a temporary work around by putting my flashcard in my printer and downloading via the pri
... Canon Digital Cameras
Can't see the camera from the computer. Everything works fine on the camera, but the USB connection doesn't work. It's like the usb driver chip failed.Put it on a linux machine, and can't see it from there either. I have reloaded the drivers several times. And it used to work on this computer. Other types of cameras work correctly with the same cable so it doesn't seem to be a cable problem. Does anybody fix these cameras?
Change the USB Configuration setting to Disk Drive in the Setup Menu. This allows the camera to appear as another disk drive on the computer so that you can easily copy the image files from the camera to the computer hard drive. ... VuPoint DC-ST300-VP Digital Camera
Hello, I have a Kodak EasyShare C813 digital camera that is not recognized by my computer. The memory card is also not recognized by my printer. Now it gets confusing. If I take some pictures with the C813 then take the card out of it and put it in my M530, connect it to my printer with a USB cable I get all the pictures off of it. Every solution some very kind people have suggested assumes the C813 is recognized by my computer or printer but that's not the case. The C813 was working j
Please un-install the driver software from your PC , then reinstall the driver or by connecting the camera to the PC to be detected as a new hardware and subsequently installed. If this is not the case then it is for sure th ... Kodak Easyshare C813 Digital Camera
I charge the batteries. i put the batteries in the camera. the camera wont work. i hook it up to the computer all day. it still wont work. the camera will stay on for 3 secs excact or wont turn on at all. why isnt my camera working?
Your fix could be as simple as cleaning the camera's battery contacts,\015\012or it could be something more serious and expensive. Before you pay\015\012for expensive repairs that you may or may not need, check the Kodak\015\012Help Center by clicki ... Kodak EasyShare C875 Digital Camera
I cant get my pictures from my digital camera on to my computer! i tried putting the memory card in the printer but that didnt work and i tried putting the cord for the camera in also and that didnt work i dont know why its not working!
ViviCAM 3710 needs its driver installed on the PC (hopefully you have the 2-tone CD that came with it) or search online for it. Once that's installed, you should first have batteries in the camera, turn it ON with door shut so it's showing pics, then ... Vivitar ViviCam 3710 Digital Camera
I put a 4.0 gb sd card into the camera slot correctly. The camera says that the card must be formatted to work correctly. I format the card, but it just tells me I need to format again. There were pictures on the card initially and after the C643 tried to format, I rechecked and there were still pictures. I deleted all the pictures, and then tried to re-format, however I still get stuck in the format again and again loop. What exactly can I do to correct this problem?
I am of the opinion that this camera is only able to use cards of 2MB and that 4 MB SD cards are not suited to it.please rate my help++++Thanks for using FIXYA ... Kodak EasyShare C643 Digital Camera
My computer will not download pictures from my EasyShare CX7330 camera. My laptop can retrieve the pictures. The cable works, and I have it plugged in to the correct spot. It has worked in the past and I know of nothing that I have done to prevent it from working now.
USB drivers needto be reinstalled on you computer" ... Digital Cameras
My stealth cam time and date setting will not work; i dont understand how to work it. please help me try to make it work correctly.
... Bass Pro Stealth Cam 1230 Digital Camera
Printer head for my cannon MG5220 wihich was purchased through amazon in December is not working
Inkjet printers need to be used frequently to prevent blocked print head nozzles. You may have blocked print head nozzles. Try the printer maintenance to clear the printer nozzles. After several deep cleaning attempts and there is no improve ... Canon PIXMA MG5220 Wireless Photo All-in-One Inkjet Printer
Pro duo isnt working
I had a similar problem with my memory stick. I turns out that the plastic at the top of it had come loose and ripping the insides. It was harly noticable but broke it completely. You may just need to buy a new one if this is the case for you. Hope i ... Sony Cyber-shot DSC-H2 Digital Camera
My Finepix Z (fujifilm) digital camera memory card isnt working
Invest in a card reader that connects to the PC. Upload your photos to the pc. Then put it back into the camera and format the card, but in the camera. Ishould work cause it worked on my Fuji ... Fuji FinePix A850 Digital Camera
Hey there my camera lcd screen doesnt turn on when i turn on my camera, it stays black and i have tried some of the suggestions i saw on ur site like holding the menu button for more than 5 seconds and resetting it.it worked bt once i turned it off and on agin it did the same thing, i repeated the above suggestion, it worked again bt the moment i turned it on n off again it just stayed black, and now the menu button isnt responding at all wht do i do its an olympus FE-320
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Olympus FE-320 Digital Camera
Software Upgrade I received a notification to upgrade my EasyShare Software. I selected the upgrade and near the end of the upgrade I received a message stating something about the Windows logo not be correct. Now I cannot download any photos from my camera. I removed EasyShare Software and tried reinstalling. It still does not work. Please tell me how to correct the problem. Thanks!
This error message indicates that the drivers are not digitally signed by Microsoft. In the event that you receive the error message referenced above, ple ... Kodak EasyShare Z7590 Digital Camera
I was brought a coolpix Nikon camaera at the end of March and after buying the correct memory card for it, I always get an error message saying that this card can not be used. I therefore checked that this is the correct card and have been assured that the card should work. Along side this is the fact that the memory card will not stay in the camera without being held in.
Sir did you check you manual for compatibility of your memory card? try to ask the person or the shop were you bought your camera for the right compatibility of your memory card aside from this, ask also the seller of your new memory card about what ... Nikon Digital Cameras
Hi, I have a Ricoh Caplio R5 which appears to be working normally in all areas except that when you switch it on, in both camera and video mode, there is no image on the screen and if you make an exposure, it still makes all the correct noises etc but obviously there is no captured images. The lens etc motorises into the correct position and the lens cover retracts. I have been through and selected the default settings where possible, but I was wondering if there was something that should be
Are you able to use the screen while going over the cameras settings but noting when trying to take a picture etc? Or is the screen blank at all times?Have you tried hooking it to the tv to see if anything comes up? ... Ricoh Digital Cameras