Having problems with your Digital Cameras ?

Hi, I own a Sony Cybershot camera, and it has been giving a few problems as of this week. The lens keep re-adjusting in and out when I turn the camera on to take pictures. It however responds just fine when in picture-view mode. There is a screen prompt that says 'Access' when the camera is turned on, as well as the message 'turn off camera and start again'. I do not think that the camera had fallen at any time, and it is just under a year old. Thanks a lot for your response, Sarah.


Answers :

Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi, I own a Sony Cybershot camera, and it has been giving a few problems as of this week. The lens keep re-adjusting in and out when I turn the camera on to take pictures. It however responds just fine when in picture-view mode. There is a screen prompt that says 'Access' when the camera is turned on, as well as the message 'turn off camera and start again'. I do not think that the camera had fallen at any time, and it is just under a year old. Thanks a lot for your response, Sarah.


... Digital Cameras

Hi, I have a panasonic Lumix, DMC-FS5 digital camera. When I turn the camera on and it's on 'photograph' mode, a message keeps appearing after a couple of seconds saying: "please turn camera off and then on again". I get the same message everytime and am unable to take any photos or even access the menu options. There are no problems when the mode is set to 'playback' mode. The images are still there and I can scroll through, as well as access the menu.


Hi,I had this same problem. I have just pulled the lense (not with any major strength) when it was fully extended. This seems to have solved it for me!! ... Panasonic Lumix DMC-FS5 Digital Camera

I have had my camera for about 4-5 years. It has worked great. lately it has started to act weird. when I turn it on the screen says access and wont let me take a picture. then after a few minutes the memory stick error message comes up


Go to camera Menu and select Initialize, OK.Camera will turn on itself, if problem still exist, tap camera gently and turn On again to solve lens access problem.Memory stick error can be solved by formatting it through Format menu in cam ... Sony Cyber-Shot DSC-W5 Digital Camera

When starting the camera, I get a black screen that says "Access". The lens pops in and out several times. Then the message, while the lens is out, is "Turn the power off and on again". Help.


I'll forward a link to a page where you can view the information to troubleshoot \012this issue.\012\012\012Please click on the link to view the troubleshooting steps then follow all the steps and check if that helps.\012\012\012 ... Sony Cyber-shot DSC-W50 Digital Camera

I have just downloaded the camera on to iphoto and have cleared the camera memory . I clicked the eject icon on iphoto and once cleared unplugged the USB download cable . I have just pushed the power button to turn the camera on and firstly get the message on the camera screen "Access" then a message comes up saying "turn the power off then on again " When I do this the same process repeats itself . The lenses wont open and protrude out of the camera ready to take photos. The battery has ju


Sounds like you did two things wrong...you deleted/erased/or formatted the camera using the computer. You disconnected the camera without using the "safely remove hardware" function. ... Sony Cyber-shot DSC-W50 Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

I have two issues with my Canon EOS Rebel XS. One issue has been acting up for a while: If I turn the camera on and try to shoot, it tells me shooting is not possible and to turn the camera off and on again or redo the battery insertion. The only thing that works is if I take the battery out and in and turn the camera on again. The second problem started yesterday. My camera would not turn on so I thought the battery was uncharged even though I got no message saying that. But after chargi


Hi,\015\012\015\012You may get the ERR XX before (Shooting is not possible, Turn the power switch to off and on again or reinstall the battery) , where XX is the error number..\015\012\015\012Please leave the error numb ... Digital Cameras

When I turn my camera on it says "Access" then a message comes up that tells me to "turn the camera off and then on" I have tried this many times and all the camera does is continue to push the lens in and out and then tells me to "turn camera off then on" Problem will not go away. Fully charged battery, took battery and memory card out for a while and re-inserted both and have same problem. [DSC-W55


This is a firmware problem that is common with many many digital cameras. It will have to be upgraded. The company will do this for $50Otherwise you may be able to find a kit online and do it which would be hard to located ... Sony Cyber-shot DSC-W55 Digital Camera

Sony-cyber-shot dsc-w50 I blieve that the battery if fully charged however when I turn the camera on all i see is a blank screen saying "access" with the lense zooming in and out then a message comes up on the sceen saying "turn camera on and off" I do this and the same thing keeps happening, could you please help? Sara


Lens unit is faulty, may have had sand or damage at some time, focus assembly inside the lens is not focussing ... Sony Cyber-Shot DSC-S40 Digital Camera

Starting error hi i m nilesh patel from india in my camera starting problem when i start it i see access error and say that turn off camera and on again 15 times i do it but it is not solved


Are the batteries fresh? Can you start it with the charger plugged in?\015\012what error code do you get?\015\012\015\012errors and messages support:\015\012\015\012 ... Sony Cyber-shot DSC-W30 Digital Camera

I need some help to repair my Sony Cybershot DSC W50 camera. When you turn the camera on, it displays 'Access' for about 30 seconds, during which time the lens zooms in and out. Then it says 'Turn the power off and on again'. Nothing has happened to the camera - it has not been dropped and this fault just suddenly started. What can I do about this? I have had it just over a year. Iā€™d be really grateful for any support! Thank you! Clare


When the camera is switched on it turns the lense out to a certain position and locks , but if due to any reason if the lense does not reaches to its proper position it retracts back and tries again 2 or 3 times, and then the movement haults and pr ... Digital Cameras

SONY DSC-S600 Sorry, no actual error -- what happens is this:- Power on camera, message comes up "Turn the power off and on again". Tried this-no good. New batteries-still no good. Sometimes it will start with an "Access" screen and then go into the "Turn the power off" message. Hope this explains the prob better Regards Sandra


If you are able to access the MENU option, then try to initilize the camera by following the steps mentioned below: \015\012\015\012Please press MENU to display the menu items.\015\012Please go to the SETUP menu and select the SETUP ... Sony Cyber-shot DSC-S600 Digital Camera

As soon as I turn my camera on, the lens starts making a weird clicking and buzzing noise. I then get a message on the screen saying "Please turn camera off and on again"


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Panasonic Lumix DMC-FS3 Digital Camera

When I turn the camera on the zoom lens goes in and out three times and then the message says to turn the camera off and then on again. I do this and it does the same thing. I was taking pictures and it was working just fine. It started to do this for no apparent reason.


It is a lens issue, will need to go in for servicing. Possible reasons are knock or grit/sand in lens unit. If you have had it to the beach on a windy day try holding it over a piece of white paper with lens down about a foot away from the paper, giv ... Panasonic Lumix DMC-FX33A Digital Camera

I took my camera to the beach, took a picture and put it back in my bag. I then took the camera back out to take another picture the lens extended but then it went back in again it went to go back out but stopped and a loud beeping noise started and a message saying lens error restart camera. I don't know how to restart the camera and if that means turning it of then on it still doesn't work. What can I do now?


If your camera went into "standby" mode, the lens retracted and you may have thought it was off. You put it into the bag and slight pressure on a button reactivated it and the lens tried to come out but may have been prevented by something in the bag ... Canon PowerShot A480 Digital Camera

My lens on my camera seems to be stuck. I have a Power Shot SD790 IS. Every time i try to turn my camera on it starts to beep and a message says that there is a lens error, restart the camera. How do i fix this?


Unfortunately, many cameras that fall prey to lens error problems can only be corrected by professional repair. But if the camera is out of warranty or the cost estimate for professional repair approaches the value of the camera, ... Digital Cameras

Hello, I have the following problem: I cannot delete images neither take new pictures. When i try to delete pictures it shows the following message: The card is locked, unlock the card to access delete features. When i try to take a new picture it shows the following message: LENS ERROR Try turning the camera off and on again (before this message it says card locked). Thanks for help!!!


Unlock the card by moving the slide switch on the side of the card. Solve your lens problem with these:\012Fixing a Lens Error ... HP Photosmart M447 Digital Camera

PANASONIC dmcfz8 Problem: When I turn on the camera and remove the lens cap I get a message on the lens that says "remove lens cap & press button". It seems like the zoom is stuck. We were using the camera for a inside night graduation & was at a distance from the subject that we wanted to shoot. After a few zoom shots we shut the camera off and when we tried to take more pictures the above problem started. Please Help!


Try to help the lens go out by pulling it very very lightly... ... Panasonic Lumix DMC-FZ20 Digital Camera

I am trying to turn on a newly purchased Canon SX20 camera but i get a message that says ''lens error'' and the camera won't start.


It may be new but the lens is damaged...that's why you get the error message. Take it back or take advantage of the warranty. ... Digital Cameras

When power is turned on the zoom lense moves in and out on its own for a couple of seconds then stops. Camera remains on (battery is charged) The message changes from "access" to "turn the power off and on again." When that is done the same process happens again. Photos can be retrieved that are in the memory to view but the problem is getting to the starting screen in order to take a picture. What's up with that? Hope you can help!


This could be dust or lint or sand that has worked it's way into the lens assembly, and is keeping the lens from initializing. Often, you can take compressed air and blow it into the front lens assembly, to try to free up the small gears there. H ... Sony Cyber-shot DSC-W55 Digital Camera

My sony cyber-shot dsc-w55 7.2 mega pixel camera turn on but the lens goes in and out many times and i get the word access on the screen then i get a message says turn the power off and on again, I did that many times , but it did not work, and I can't get the menu button to work or display any thing, so I am wondering what is the problem and how to fix it?


... Kodak EasyShare CX6200 Digital Camera

When I turn the camera on it says access , the lens goes in and out then I get a beep and message reads turn the power off and on again. I've done this over and over again and it still won't work.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\01 ... Sony Cyber-shot DSC-W30 Digital Camera

When I turn the camera on it says access , the lens goes in and out then I get a beep and message reads turn the power off and on again. I've done this over and over again and it still won't work. Any sugestions?


One thing to test before going to repair, make sure you are using a fully charged and correct battery for your camera.\015\012If so, the camera will need repair. This is a common problem and can be fixed. Teleplan Camera Repair does a great job ... Sony Cyber-shot DSC-W30 Digital Camera

Hi I have panasonic Lumix DMC-FZ20 and when I start camera on the display it come with message "plz turn camera off and then on again." But it dont really do anything when restart occurs. It keep showing same message. Although it allow me to see old pics when started with play mode but dont start if the message has already on display. Moreover, when this message is on it wont allow me to work with any of the camera function including zoom in/out. . . Many Thanks . . .


Usually when this message pops up it indicates the lens position is jammed, you will need a camera technician to assess the item for repair cost. ... Panasonic Lumix DMC-FZ20 Digital Camera

There are several problems with my camera one of them is the fact in that Every time i turn on my Lumix 10x mega pixel camera the lens won't focus it also won't let me take any pictures. When i turn the camera off the lens won't go back into the camera but when i turn it back on the lens gos in and then out again. There is one more problem whenever i go to look at the pictures on play i can look through a few before its says "please turn camera off then on a again" it also says the same message


OK, if there is sand in the camera, the gears will bind or stop causing the error that you described. I think it needs to be taken apart and cleaned by a service center before using again. Or you could buy a spare caemera to use on your family holida ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4418 seconds