Having problems with your Digital Cameras ?

Display screen how do i get my display screen to come back on?


Answers :

Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Display screen how do i get my display screen to come back on?


... Digital Cameras

Polaroid i733 7.0 digital camera won't work. I usually use digital rechargeable batteries, but have also tried duracell ultra and energizer lithium batteries. The camera will sometimes turn on and the lens will come out, but that's it. Nothing will display on the screen, it just stays black. I can't even get the lens to go back in. The camera is only about 3 months old. Help! Sharon


My daughter just had this problem with her camera. The camera was off with the lens barrel extended. When I looked at it closely, I noticed that the inner part of the lens barrel was at a slight angle to the camera. I pushed firmly on the low side ... Polaroid i733LP Digital Camera

I unhooked my AverMediaVision130 Document camera at the end of school and I didn't write down the instructions on how to hook it back up and it isn't covered in the User Manual. I have a computer, projector(mounted on the ceiling), document camera, splitter and conputer extension cables. I can get either the camera to project to the screen or come through on the computer monitor, but I can not get the camera to project to screen and leave the computer screen on on the computer. Do you have a dia


From the document camera first, I hooked the VGA OUT to the wall box that is connected to the projector mounted in the ceiling then I connected the VGA IN to the DATA DISPLAY on the SPLITTER. The Computer monitor cable connected to the LOCAL MONITOR ... Digital Cameras

I have a Canon Powershot 5S IS. The image on the LCD screen is not rotating when I rotate the screen, and when I snap the screen into place with the LCD side out it goes from displaying on the LCD to displaying on the viewfinder. It was working properly before, but I can't figure out how to get it back to those settings.


On camera menu, turn on Reverse Disp. ... Digital Cameras

Canon A85 Well there are a couple of things going on right now. Sometimes when I turn the camera on it will come on but the screen on the back stays dark and blank and it doesnt make the power on noise, other times it will come on correctly. Also when you do get it to come on correctly the screen is very hazy and has lines running through it.


See this link. ... Canon PowerShot A85 Digital Camera

Vivicam3705 new batteries several times. camera comes on when power is pressed when batteries are 1st put in. then goes to setup time/date screen, complete that and vivitar shutdown screen comes up and camera shuts down and can not get it back on. please help me


BUY A CASE OF BATTERIES, YOU WILL NEED THEM\015\012 ... Vivitar ViviCam 3705 Digital Camera

T 737 camera when the light button is pressed the screen gets the polaroid display ... but after some time it gets off... earlier the display will come and the shutter also opens....now the shutter is not opening...


Hi there,\012Well these all symptoms indicates that there is a battery problem. you need to change the battery of your camera. Please post further comments if further you have the same problem......Good Luck!!Thank ... Polaroid Digital Cameras

Nikon D40 Turn camera on, and it used to display the photo I was ready to shoot. Had this feature for a few weeks, now I only get the menu and a black screen How can I get that display back?


If you were seeing the image before you shoot, there was definitely something wrong with your camera.The D40 does not have a Live View feature. The display is for menus, shooting information, and image review. Not preview. ... Nikon Digital Cameras

I have a fully charged battery and I turn the camera on and all of a sudden I cannot get a display on the screen. It gets a few purple waves, but goes back to a black screen. I have it in camera mode and the original settings i had the camera in when i took pictures, which came out very nice. I saved all my photo's to my computer to see if maybe i filled the memory stick, but still no luck... -Sandy


The display is probably bad - it can be replaced. Try taking a picture and download the results on a computer - if it's ok, then that confirms a bad display. The camera is still usable but with a bad display viewer. ... Sony Cyber-Shot DSC-T1 Digital Camera

Zoom error Today after using my camera for awhile the back screen displayed "zoom error" and a little sound whirled. Then the camera shut off by itself. I turned it on and off a couple of times, but without success. The lens is extended and will not withdraw back into the camera. I have taken out the batteries and re-inserted them. Finally, I gently pushed the lenses back to the body of the camera (as they seemed to be trying to go back to the camera), I am still getting the zoom error reading a


You may be true that sand must be creating this problem, as this happens very often. the sand enters into the lense assembly, creating friction in the movement. if this has happened total dismantelling and cleaning of the lense assembly will solve t ... Olympus Camedia C-350 Digital Camera

The gears seem to be frozen. the lens wont move in or out by self and when turned on screen displays turn cam off the back on? If you get the lens out or push it back in, in wont move back into the other position by itself. it doesnt even make any sounds like its trying to move


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-FX50 Digital Camera

Only Red When I turn the camera on the screen shows only a blur and not of the image of what I am taking, but just a color blur or a white blur, depending on the lighting. when I take the picture I get what shows on the screen. When I turn off the display and take a picutre the picture comes out like what is on the screen. Please help


This definitely sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info: \015\ ... Canon PowerShot S500 IXUS 500 Digital Camera

Help! My camera is doing the same thing other's do too. I turn it on and it says "Turn power off and on again" and the lens comes out and goes back in halfway. sometimes I hold down the play button for about 5 secodns and then press it again and it allows me to take (bad) pictures. When i say bad pictures I mean the screen starts shaking and gets static or something and then when i finally can take a picture they exposure comes out so bright that the picture is just a all white or it comes out t


Hi try turning on and taking hold of the end of the lense and gently pulling and twisting you may hear a click but dont force it. then turn off and on again. then you may want to try\015\012\015\012\015\012Press Menu button to ... Sony Cyber-shot DSC-W55 Digital Camera

Hello, I have been given a very old model of this camera for use in a workshop with street children. The screen is out of focus and all the pictures come out blurry. When I look at the screen without any pictures on it looks like grainy like it is a really bad resolution. Is the camera just too old? It also gives off smoke when the flash goes off! If possible could you get back to me asap. Many thanks, Kate


Sounds like more trouble than it's worth. ... Canon IXY 1000 Digital Camera

When camera gets turned on, the lens goes in and out of focus a few times and then screen turns blue and displays "D : 5f08 5e02" and does not go back to shooting pictures again. But for just looking at the pictures on the memory card, it works if turned on in that mode. If turned on in photo-shooting modes, it cannot be switched back to view photos. (OLYMPUS M700)


It's a sensor issue. The error indicates there is a problem on the lens.It may be caused by sand, broken gears or any other foreign object in the lens mechanism.A simple fix is to turn ON camera while holding it with\015\012the len ... Digital Cameras

Have just inherited this digital camcorder. Want to record video onto card rather than tape so bought a new card today. Tried to use for the first time but on pressing the record button I get a red 10 second countdown on the screen and then it beeps and the recording stops. Am able to play back the 10 seconds of footage ok but can't get it to record for any longer. Have gone through the instruction booklet with a fine tooth come and probably missing something really simple - but want to use


Well, you failed to tell us the make and model of the camera so I can only give you a generic answer. New cards must be formatted in the camera. Video requires a fast card so it can keep up. ... Digital Cameras

I carent get a memory card to work at all. Tried a 2gb and it comes up with ERROR and askes if i wanna format the card, so I formated the card, and it went to picture display screen, took a photo and it came up with ERROR again. I then tried a 4gb card and when I turned on the camera and it just displays vivitar logo permanently. Camera works fine with no memory card in. Vivitar 3750 model thanks for all your help.


These cards is too much for the cam can hold and would cause errors just like u said try 512mb memory card or even less should work good and then clean it up by downloading all on ur pc and re use it i use 128mb even for mine lol,hope that helped ty ... Vivitar ViviCam 3750 Digital Camera

My camera turns on and shuts off right away, the lens comes outand the screen does it's opening casio thing and the green light is flashing then all of a sudden the screen goes black and the lens goes back in, i fully charged the battery and still get the same thing happening!


... Casio Exilim Card EX-S100 Digital Camera

I have a canon powershot sd 1000 and the other day I was taking pics and screen display went black. I figured it was the battery, so i charged it and now only comes up with a white screen and the lens does not open when power up the camera. No noises either. So we put the battery back in the charger and it is red, signaling that the battery needs charging. Is this a battery problem or a camera problem


... Canon PowerShot SD1000 Digital Camera

Sony DSC-N1 "capturing". I take pictures and after I hit the button I get a message "capturing" then "processing". This ties up th screen for a while and then comes back on, trying to retrieve the pics, I get nothing but a white image from the memory card.


Capturing- means that the image is being registered in the CCD-Processing means - the processor is dealing with the capture.Both should take but a scond or so.If it takes longer and the result is No image.Then it is iether a c ... Sony Cyber-shot DSC-N1 Digital Camera

Focus error I am from the Caribbean Island of St.Kitts and I was on holiday in London, England in August 2006 and I bought this camera. It worked wonderfully and I took plenty pictures. I had no problems at all with it until now. When the camera was turned on there was a sound coming from the lens area. The lens are open and will not close. On the screen there is the warning display "focus error." Can I get a solution to fixing this problem Screen says focus error , makes noise.


Hi...The transmission system that moves the lens in and out has a problem with it's gears. There is most likely a gear or an actuator that has fallen out of alignment and is getting stuck at a certain point as the lens comes in/out.There is some dist ... Fuji FinePix A500 Digital Camera

Hi i have an olympus 770 sw and the back screen for looking/taking pictures is blank and i cant get it to come on, is it stuck in a bat saving mode, how do i get it to work again. i was taking pictures when it happened so i think i must touched the wrong button


Remove the battery and then put it backCome back with what happened ... Olympus Digital Cameras

I can't turn my camera on,I press the power button,it gives me a whirling noise,the lenses come out(but not all the way),the picture on the screen is blurry,and I can't make a shot,and after2 seconds the lenses come back in by itself.Then it does it again,without me even pressing any button!But I can still view my pictures.But I can't download them on computer,because it still displays an error message D: 5fo8 5e02,and the lenses start moving again.I don't know how to fix it.Please help me.Becau


The camera may be faulty or it needs to be reset to the factory settings.\015\012Try removing the battery leave it out for at least 1/2 hour, then replace the battery.\015\012If it doesn't work then you need a new camera. ... Olympus Stylus 700 / 700 Digital Camera

Negative effect. I've had my Canon Powershot S3 1S for over a year now. The other day I was taking pictures and it was working fine. I turn it off and set it down. I come back later, turn it on again and the screen shows has white lines that keep flicking over it. I turn it off and take the batteries out. Later I put the batteries back in, turn it on, and find that it is in negative effect. I'm pretty sure that my camera can't do this naturally and I've tried everything to see if I could get it


Have you tried resetting it to factory settings. if no please do it.(refer manual)but if yes please contact us again ... Canon PowerShot S3 IS Digital Camera

My fugi finepix s1500 is displaying the Frame No. Full on the screen. Everything I have read says just to go into the menu and change it from continuous to renew. I did that and it worked but then my camera turned off and the Frame No. Full is back on the screen and I can't get it to go away no matter what I do. How do I fix it?


... FUJIFILM Finepix S1500fd Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2545 seconds