Having problems with your Digital Cameras ?

I can only get my FL-50 flash to go into manual or auto mode, I am wanting to put it into TTL mode but don't know how to do this. I have just changed my E-3 body and wondered if there is a setting I need to have it in in order for the TTL mode to work?


Answers :

Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I can only get my FL-50 flash to go into manual or auto mode, I am wanting to put it into TTL mode but don't know how to do this. I have just changed my E-3 body and wondered if there is a setting I need to have it in in order for the TTL mode to work?


... Digital Cameras

I have a Canon sd630.The camera works great except that it won't remember its settings. Upon turning on the camera,it would say it's in manual mode, but if I change it to automatic and then turn it off. It would be back in manual mode again. I have reset the camera and even taken apart to replaced the internal battery. Still no luck. Appreciate any help. f.y.i I have tried looking for a firmware update, but no luck either. I was wondering if I could flash my camera with the sd500 firmware? I ju


Try to follow the route up the circuit from the battery on the motherboard.\015\012maybe the battery is ok but the power not rich to the mother board or memory chip.\015\012take more attention on the connectors. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

My canon EOS 350D wont work in auto mode. It wont autofocus at all in any mode and it wont take pictures in auto mode when the AF is on. Changed the CF/battery/ reset factory settings etc. Still no change!


Try cleaning the contacts on the lens and the camera body where they meet with a cotton swab lightly dampened with rubbing alcohol. ... Canon Rebel XT / EOS 350D Digital Camera

Hi, I've just recieved my nikon d90 back from a repair and service, and although everything appears to be working fine, whenever I want to change shooting modes,( auto, P, M, flash off etc), they only work once I have selected them, and then turned the camera off and back on. In other words I cannot be shooting in the Auto mode and then switch to "flash off auto"....all that happens is that the auto focus works but the shutter will not operate. If I switch the camera off and on however, I can t


I'm going to assume at this point that the camera has been serviced correctly. What I'd suggest is that you look in your manual and find where you can reset your camera back to the factory default settings. Okay here are a few thoughts that might be ... Nikon D90 Digital Camera with 18-105mm lens

The mode dial doesn't seem to work. The camera is stuck on the high speed sequential setting. When we select iauto, it takes one picture and then freezes. When we select the camera option on the mode dial, it takes 13-15 pictures in succession and then freezes. The pictures are taken without the button being pressed. We need to power off to change modes. The camera did work for a little while.


Base from the description of your problem what we can do here first to correct the problem is to reset or restore the camera settings to its default from the camera MENU. Then once you done that check if its working fine now. ... Olympus Digital Cameras

Hi, I have a Canon Powershot A700 digital camera and I am facing a problem with it. The 'Mode Switch' button, which changes the mode from Shoot/Record mode to Play/View mode is not working. Irrespective of whether the button is up or down it is in Shoot mode only. I am not able to download pictures to my PC as I cannot switch the mode to Play/View mode. Seems like a hardware problem. Can you please advise and help? Regards, Rohit Bajaj


If you have the manual for this camera turn to page 15.This tells you how to switch between Shooting Mode and Playback Mode.This is achieved simply by pressing the DISP button.This button is located below and to the left of the FUNC ... Canon PowerShot A700 Digital Camera

Dark Images At some point, the images from the camera became very dark in automatic mode. Previous to that, the images were perfect. I have checked all settings many times and changed back to default settings. Nothing has seemed to work other than to change mode to "P" and set for extra exposure. Thanks.


Even in automatic mode, camera still lets you pick what ISO to use. If ISO-Auto is OFF in camera menus, this can give some dark images. Press and hold ISO button and rotate command dial to give a higher ISO, or turn ISO-Auto on in camera menu with cr ... Nikon D40x Digital Camera

Forgets settings My optio s40 worked well until just after the warranty expired. Then it started acting up. It maintains the default settings in auto mode. It allows me to change them, but when I shut it off and power up again, it has returned to the default settings. In Pict mode, it maintains EV +1, AWB as flourescent lighting and image size as one higher than the smallest size. Again, I can change the settings, but when I shut it off and power up again, these are the settings it has. Any idea


I had the same problem. Pentax told me to format the memory inside the camera (take out the memory stick and camera will be set to camera memory). This works! (though i have to do it approx every 200pics, the problem keeps coming back!) ... Pentax Optio S40 Digital Camera

Hi, I have a Canon T2i Rebel. When i put the camera in "M" (totally manual), the image doesnt appear in the LCD screen. Everything else works fine in the monitor, but it is as if the lens where covered with the cap. But it´s not, and acutally all the other modes work fine. Only in the manual mode the image doesnt show, and the pictures also appear completely black. The menu shows sometimes something as if the exposure were less than -2, but even though i change the values for everything hig


That's great news, so let's write it up as a solution so that other people who search on here find the right information!So it appears that the Canon T2i when in manual mode (M) remembers whatever settings you play with, and that these se ... Canon EOS 550D Rebel T2i Digital Camera

I can not get the auto flash to work The screen shows on the left: iso auto, a box, M1 on the right the flash symbol A, auto, steady hand symbol, 1375 I try to take a picture and the camera won't take unless I turn off the flash. I have tried to change many settings in the function area, but I can not figure out what I accidentally changed in the first place. please help me to get my camera to work in the auto mode again


I have this same exact problem. When you say "repair it," how? ... Canon PowerShot A720 IS Digital Camera

Sigma 17-35 mm AF EX f2.8-4.0 bought for EOS 50 4years ago did not work with with new Canon 400D. Sigma claimed needed new chip. Since August is now back for third time. Noisy focussing, hunting when focussing and inaccurate focussing with both camera bodies. Also does not indicate change in maximum aperture from 17mm to 35mm or indicate lens angle in digital data. Since chip change will not now focus correctly with EOS 50 body.


... Digital Cameras

On my Finepix S9500 when I select programmed aperture or shutter priority when I go to select the speed or aperture I am unable to change the aperture or shutter speed, or in fact the ISO setting. The camera seems to work well in automatic mode but I am unable to do any creative work because I can't overide the autp mode. Help!!


Sorry, not a solution but wondfered if you ever solved this because I cannot work it out! ... Digital Cameras

I cant change the apeture value in manual mode. all other modes are working properly. i tried removing the batteries and the lens and no change.


The exposure lock function is enabled. its to the right of your lcd screen bellow your scroll wheel. the LOCK switch ... Canon EOS 7D Digital Camera

I have bought this camera about one and half years ago. The camera worked for about alittle more than a year and it did work well. I have charged the battery to full a charge. The camera turns on but when you try and change anything with the camera it stays in this one mode. I try and cancel pictures from memory and it will not let me go there. I have tried all different modes and it will not move.


... Digital Cameras

Overexposure My Nikon D40x is WAY overexposing in AV or S mode. Does it need repairing? (a long trip to get fixed). I tried resetting to default store settings, tried using only manual focus, tries changing the metering options. Noe have worked. AV mode worked beautifully 6 months ago in Africa ......


That sounds like the aperture blades may be sticking open.\015\012See if the overexposure gets worse and worse as you close the aperture\015\012When you see these kinds of symptoms, and is usually caused by oil that's leaked on the apertu ... Nikon D40x Digital Camera

P850 I need to figure out how to work my camera. The manual is not clear. For example, I dont want to take all of my picture is auto mode, I want to work with aperture, exposure and so on. When I put it in manual mode I can't figure out how to change the exposure and so on. Please help!!! Thank you in advance, Nancy


You need to read up or get lessons to learn manual photography. Search 'free beginners photography lessons' on Google and try to find a website which you like, as there are many with lot of great content. \015\012\015\012Essentially, you would need t ... Kodak EasyShare P850 Digital Camera

Flash will only work in auto mode. used to work ok then suddenly stopped working in fill in etc. I thought it was that the batteries were getting low (rechargeables) but have changed them & only works in auto.


... Vivitar ViviCam 3765 Digital Camera

Powershot Sd750 seems to be stuck in the custom mode, it turns on and off, screen works, but none of the buttons work so I can not take pictures or change the settings. This happened before and I recharged the battery and it worked just fine.. this time it's not working.. please help?


... Canon PowerShot SD750 / IXUS 75 Digital Camera

My SD800IS was working fine while in the very hot/humid environment of Yap. I took it out of my air conditioned room and went to take a picture almost immediately. The view finder, the LCD image and the lens were all fogged. The camera worked but took foggy images. Eventually the fog cleared and my photos were fine but most of the controls no longer work. I can change the selector knob that determines if the camera is on auto, manual, video or display modes but it won't zoom and the program


The foggy images and lens was due to condensation caused by the camera's surfaces being cold in a humid/moist environment. Usually this happens and goes away without issue. If you believe issues are continuing, consider placing the camera completely ... Canon Digital Cameras

My Nikon D40x won't auto-focus. When I press down the shutter button, it won't do anything at all. If I switch to manual and back to auto, it works for 2-3 shots, and stops working again. If change shooting modes from single to timer and back, it might work for a couple shots. I have not been able to find any other solutions. Any suggestions?


Try cleaning the contacts on the camera body and lens where they meet with a cotton swab lightly dampened with rubbing alcohol ... Nikon D40x Digital Camera

How do I change the aperature in the manual mode. As I change the shutter speed using the top dial, that works fine however, I'm having trouble using the dial on the back to change the aperature. What should I do?


Make sure that the power switch is in the correct position.It actually has three positions:\012\012Off\012On (with quick control dial disabled!)\012Third positi ... Canon EOS 40D Digital Camera

Hi, I have a Sony DSC-W100 cybershot camera that the mode switch has gotten flaky. If you just touch it, it switches modes and if you rapidly change modes back and forth from one end of the control to the other, it may work for a while and then gets flaky again. Acts like the switch has dirt in it. Can I buy the switch? Clean it? or should I just toss the camera? Jim Lofgren in Redmond, WA


Hi!A common problem with the W100. It can be taken apart and cleaned, but unless you have experience in things like these, I would recommend you getting a new mode switch. You can get one from here http://hop.02.lv/UQI work for Sony. ... Digital Cameras

Hi my sony Dsc H50 flash does not work on all other modes except 'easy' mode. when i try ingaging it on other modes message flash settings cannot be changed.


... Sony Cyber-shot DSC-H50 Digital Camera

Frozen Lens I just dropped poor camera on to the carpet from about a foot! Everything seems to work except the shooting mode, the lens wont extend from the actual camera. The slider still goes across fully and the battery is in fine. I can go into quick view mode and still change settings etc. Is this likely to be expensive to fix?


I initially went back to the manufacturer - Olympus at [email protected] found on the website ... Olympus MJU 400 Digital Camera

Flash unit will not open or work in any mode except "easy". If you try to change flash setting with control button, you get message that "flash settings cannot be changed"


You may have accidentally hit the BRK button next to the shot button. this turns on bracketing and locks out flash changes. Hit this button again to turn off bracketing ... Sony Cyber-shot DSC-H50 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2749 seconds