Having problems with your Digital Cameras ?
THE LUMIX DOWN LOAD DOES NOT WORK WITH WINDOWS 7. IS THERE A NEW PROGRAM THAT WILL ALOW ME TO DOWN LOAD MY PICTURES.
Use a card reader instead of your camera.
Repair Help & Product Troubleshooting for Digital Cameras
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
THE LUMIX DOWN LOAD DOES NOT WORK WITH WINDOWS 7. IS THERE A NEW PROGRAM THAT WILL ALOW ME TO DOWN LOAD MY PICTURES.
Use a card reader instead of your camera. ... Digital Cameras
Tried to down load pictures from my new A630 to my existing Cannon utilities program. The program would not open. I then took the new Solutions disk and installed the programs. /when the installation was complete I tried to down load the pictures again. When I attemted to down load I got an error message the Zb Module had encountered a problem and had to close. I got the same response when I tried to open the Zoom browser. I tried from the shortcut and by going direct to the programs.
SteveJudy, Uninstall all utilities related to the Camera in question (via add/remove programs within control panel), re boot, and install the utility from the disk that came with your new A630 and give it another try.Good luck. ... Digital Cameras
I have a Gateway computer with Vista program on it. I have been able to load my pictures from myCX7310 Kodak until now. I don't see a way to do it now. There are no directions as to what happened to adding pictures. Some thing seemed to have disappeared. Is it the Vista program ? How do I load my new pictures? Thanks. Evelyn Connelly
Try connecting the camera to a diffrent usb port and it should recognise the Camera atthat point of time u can click on start goto computer and in computer u will see a removable disk option u can download the pictures from there if it doesnt show up ... Digital Cameras
The camera was working fine. I imported the pictures to Picassa succesfully and turned the camera off. I then went to take new pictures and all I get is a black LCD screen and when I load into Picassa the pictures are all black. The camera seems to work well, zoom, flash menu all seem normal except there is no picture. Can it be fixed and would it be cost effective?
The CCD is bad or the Iris is shut stuck. If it's the Iris just stuck, it might just have moisture - leave the camera in a dry place for a day. If it's the CCD - pretty much "kiss-it-good-bye". To replace the CCD is expensive - get a new camera. ... Digital Cameras
Something has happened or I inadvertantly did something to my computer. hp pavillion a305w. Icannot get pictures to load from my vivitar ViviCam 3935. It worked brilliantly for the last couple years and after Idid away with some programs, it will not load. I do not know enough about computers to be fooling with these things appearantly. I just want the ability to store my digital pictures on the computer again. Can anyone please help me?
... Digital Cameras
Hello, I have a Nikon n65 SLR that I just bought off amazon.com to take pictures of my christmas. Everything seems to work, loading the film, put fresh new batteries in, no error messages, autofocus appears to work fine. But the camera will not take a picture.
Do you hear the shutter release mechanism making a noise, indicating that it has opened the shutter when you press the capture button? Also is the memory card full? Empty some pictures and format the card and try again. ... Digital Cameras
I have a Fuji FinePix S2700HD camera and it will not upload pictures. The computer recognizes the camera but not the pictures. I uploaded my pictures from my printer. Geek Squad said it might be a software issue because they couldn't get it to work either. The camera is brand new and they already exchanged once. Any suggestions, it shows camera is hooked up but then asks what program would I like to run it under and provides no choices, just a blank box labeled with the camera name and model. Th
I have the same exact problem and I found something on their website (Fuji) that says its a firmware update that is supposed to address "improved handling of playback of images". I am about to download it. The link is right here. It gives specific se ... Fuji FinePix J10 Digital Camera
Is there a driver for my pc that i have to download so that i can load picture to my pc windows picture program. when i try to download wiundows stops working. i use widows vista home basic
Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer ... Norcent Technologies DC-1020 Digital Camera
I guess I need a new device driver. The A75 worked fine when loading pictures to my XP laptop but not with the new one using Vista
You could get a device driver or you could simplify your life and get a card reader. ... Canon PowerShot A75 Digital Camera
My canon rebel xsi was working a month ago. Today I took it out from the case and found it was not reading the card (8gd transand). It had been working fine until last time I used it mid of April. Thought it was a card problem, I went out to buy a new one (8gb sdhc), put it in and it asked for reformat. Proceed to reformat the card, but it says it can't reformat it and ask to change the card. Put in the old card (which was loaded with picture I previouly took), it asks the same thing. I'm 100% s
The reader in the camera has gone bad. You can get it repaired by anyone who fixes camera's or by sending it to Canon which will cost you more then finding someone in your home town that repairs cameras. Just FYI the repair is somewhat costly roughy ... Canon Digital Rebel XTi Digital Camera
I have a HP M525 camera, Seerial No. CNGBUQ30Z4. Recently, when trying to transfer some up-loaded picturs (from the camera to the computer)the screen went blank. When I tried to restart the process by clicking on the icond on the desktop, it would not open and turn on the Photosmart part of the program. And, now, I an not able to transfer the new pictures from the camera to the computer so that I can process them like put then in a Word file, etc. What should, can I do to resolve this proble
Hi,\015\012The possible solution's are \015\0121 . First uninstall the photosmart software from the system and reinstall the software once again . Install in C: drive and then connect usb and transfer photos this will work . If this doesn ... Digital Cameras
I am trying to load pictures from memory card to my PC using the software for finepix supplied with my J10 camera. For some reason this has stopped working and I am getting error response "Exif Launcher 2 has stopped working". Do I need new software and if so where can I get it? Many Thanks. Kelvin
Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Fuji FinePix J10 Digital Camera
I bought a PENTAX SLR K 100 D camera, loaded a new SD card, formatted it in the camera , inserted new batteries and tried to take a picture, No pictire, the shutter button seens to not be working. There is a f 689 in the view finder. I tried both MF and AF , both AUTO PICT and P ,The camera is set at defalt settings.I need help or must return it asap.
Just curious if the new batteries are alkaline or rechargeables. If they're rechargeables, make sure they're fully charged, but since alkalines come with the camera, I would use those.\015\012Couldn't find any information about the F689 in t ... Pentax K100D Super Digital SLR Camera
My camera was working fine . I moved the computer to another room. This is the problem when I try to transfer pictures from the camera to the computer I get an error message stating that the software is unable to find The Olympus Digital camera connected to the USB Port on your computer. Well I have tried eveything. A new USB cable, reinsatlling the program. Moving the cable to all ports on the computer. I took the camera to a friends and we insatlled the program on his computer and it did the s
Try to get a external memory card. And try that instead. It might work better than the usb. ... Olympus Digital Cameras
I loaded the software according to directions - everything seemed to work fine, but I can not get new pictures to load from camera to pc???
Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... FUJIFILM A230 Digital Camera
Didnt realise I furst had to format the memory card for my new Nikon D60. Took lots of photos at the weekend but when I took out the card to download the images there was nothing on it. However I can still view the images in the camera's display screen. I have loaded the disc that came with the camera on to my computer but have not as yet been able to work out how to download the pictures. Bearing in mind the memory card was not formatted I just want to know if I will be able to download
In some cases we have found that if there is a virus on the card and if you try to read it directly on a computer having anti virus activated, the computer shows card as a blank. As the camera software is not effected by the window based virus, it ca ... Nikon Digital Cameras
I have installed the olympus disc Camedia for a C-740 camera in a new computer. When I try to download pictures the computer cannot see the camera. THe same files work fine in the old computer. I Have tried removing and reinstalling the program.
The software is not compatible with vista... it will work, you just have to transfer from media and choose your removable disk drive that represents your camera ... Olympus Digital Cameras
The disk for my digital camera has a crack so it won't work & I need to get some baby pictures of my camera Where can I get a new one or down load the software please. The software is Arcsoft Photo Impression 4.0 & Arcsoft Videoimpression 1.6 Pccam. Thank you, Shona
Here is first one, cut & paste to address bar.http://arcsoft-photoimpression.en.softonic.com/downloadhere is second one, it is a later version but all good.http://arcsoft-videoimpression.findmysoft.com/do ... Digital Cameras
I have been downloading my pictures from my camera as described in SP-550UZ manual with absolutely no problem. Its been about two months and today I tried and it does nothing! I opened OLYMPUS MASTER 2 and tried to down load as found in the browser bar. Its says not connected to the camera. Batteries are new and camera works. What is wrong? Barbara Savoia email@example.com
Blame Microsoft updates. Use a card reader to download your pics to a folder you create on your desktop. ... Olympus Camedia C-350 Digital Camera
Windows Vista I am unable to load the program to view my pictures on my computer. It tells me the drive or something is incompatible. Is there a download that will work with Windows Vista, and if so, where do I find it. Thanks so much.
Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Samsung L100 Digital Camera
I am trying to load my pictures from the camer to computer and it is not working for me new camera
Downloading pictures from your digital cameraUpdated: September 15, 2005\015\012After\015\012you take pictures with your d ... Digital Cameras
We have installed new xD-Picture Card M2GB into Olympus Digital Camera Model No. C-750 Ultra Zoom not work, Screen mentioned Card Error I purchased a 1GB Sandisk (used camera) but when I power camera on I get a "Card ERROR" message. The very first time I powered up I programmed the date and time....but then got the error message. Now I get it every time I turn it on. I don't have another card to test it with:(
Go here\015\012http://www.casio.com/home ... Casio QV-R40 Digital Camera
Hello there. We bought our cyber shot DSC-W110 camera Christmas 2008, and it worked fine on our PC notebook. PC notebook died 2 weeks ago and I can't get camera to speak to new Mac Book Pro OS X version 10.6.3, or load up Picture Motion Browser, or get Drivers. Still waiting 3 days now to hear back from Sony Techs, Please help fast - I have 3 jobs outstanding that I can't upload, and can't do any other jobs until i get current ones off camera. getting desperate, thanks in advance fo
\012Please get it downloaded here :\012www.driverskit.com/Camera/Sony.html\012\012 ... Sony Cyber-shot DSC-W110 Digital Camera
NO video Hi. I have a 2005 z760 Kodak digital camera.I canload the memory card pictures and the first frame of each video to the latest easyshare program (8) yet no video. My laptop is a 2.1ghz with 4gb and this is all new stuff to me.I also was able to down load via usb cable still no success.Help much appreciated.
Do you have QuickTime Player on your computer?\015\012In order to download:\015\012www.apple,com\015\012\015\012The video can be saved under your C drive, but Easyshare cannot play it without QuickTime. ... Kodak EasyShare Z760 Digital Camera
I purchased a new laptop with the Vista operating system and I want to load pictures from my Cannon Powershot SD450. I do not have a CD program disc for vista. Help?
My camera's program is too old to run on vista. ... Digital Cameras