Having problems with your Digital Cameras ?

Fell on the road, gives this message: lens error, restart camera

\015 Fell on the road, \015\012can not open neither close, the lenses are half open \015\012\015\012can not do anything\015\012\015\012gives this message: lens error, restart camera\015

Answers :

Fixing a Lens Error on a Digital Camera
\015\012
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Fell on the road, gives this message: lens error, restart camera


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Digital Cameras

Camera felled to floor lens tries but cannot retract camera turns on and off fine, error message "lens error, restart camera" it appears that until lens can function properly and error message is resolved camera is inoperable.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot A630 Digital Camera

Lens error my camera model is canon powershot SD770 is digital elph i dropped my camera and a message is displayed as lens error i tried to restart my camera and again the message is displayed as lens error please give me a solution sir please


I've had similar problems with various versions of this camera. Here's \015\012the fix, if all else fails. These are step-by-step instructions to take \015\012apart and fix the camera's lens error. \015\012http://johnsmouth.wordpress.com/2010/12/01/l ... Canon PowerShot SD770 IS / IXUS 85 Digital Camera

Lens Error Hi, When I turn on the camera, it says "Lens Error. Restart Camera." When you restart the camera, it gives you the same message. The Canon zoom lens will not go back into the camera. Help!


If you are sure that your battery is fully charged but still does not do any good, then do this little trick:1. Hold the camera on your right hand with the lens facing the ground.2. As you press the power on button, tap or hit ... Canon PowerShot A550 Digital Camera

Lens error I have a Canon Powershoot SD1000 and it was working fine until one day the lens stopped retracting. Now it doesn't retract and I get a Lens Error, Restart Camera message. I looked at other websites to get help and tried some of the ways they suggest to fix it. Not sure if its working, because it still gives the same message and makes a noise sounding like its trying to retract then gives me the Canon welcome picture. I've only had this for a little over a year and would like it to be


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon IXUS V2 Digital Camera

Lens Error. Restart Camera. Camera gives this error message and then shuts off. I can't access photos or function buttons. What can I do?


Press the "MENU" button and navigate to the reset command and reset the camera. That may get the camera to function properly. ... Canon PowerShot SD1000 Digital Camera

Lens error i dropped the camera and it comes as lens error i tried to restart the camera but again it shows a message lens error i am really upset please give me a solution


Ur lens strip is broken change it or call me 9890274954 ... Canon PowerShot S410 / IXUS 430 Digital Camera

I have a powershot a470 that I bought in May 2008. My lens will no longer go in or out and gives me a lens error, restart camera message on bottom of screen and beeps a few times before shutting off by itself. I can no longer take pictures and have replaced the batteries. The camera will not restart at all. I have always taken care of my camera and dont want to buy another. Please help. Thank you.


This is a lense drive problem. \015\012And may require the WHAP method to correct :D\015\012\015\012The tolerances between the motorized lense and the camera body are so tight, that any graing of sand, lind, and even hair can cause ... Canon PowerShot A470 Digital Camera

My 2 year old son dropped the my husband's Canon G11 twice while it was open with the lens out. Now the lens won't retract or the shutter close. It gives me a 'lens error, restart camera' message and won't restart. I tried taking out the battery for a few minutes and replacing it and reopening the camera, but to no avail. I'm afraid of taking it to someone and having it opened as I know that the chances of damaging it that way are bigger. Please provide me with your soonest reply. Rania


Hi Rania. If you go with a place that knows what they're doing, the camera will be perfect again, sometimes even better as they'll service it all up at the same time. A site that a lot of people go to for help with the Canon Powershots is: ... Canon PowerShot G11 Digital Camera

When I turn on the camera, it says "lens error, please restart". The lens doesn't open when you turn on the camera- it is like it is stuck shut. you can manually force it open, but it won't go automatically, and so it keeps on giving the error messages.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon PowerShot SD600 Digital Camera

I have a canon A2200,it has got a lens error and when i turn it on it gives the following messages;lens error,will shut down automatically,restart camera.how can i restart my camera


Try these procedures. ... Canon A2200 Digital Camera

Canon powershot sc1100 is gives a message on screen: lens error, restart camera. i have removed battery, restarted camera repeatedly and still get same message. what next? thanks


Try the procedures in this tip. ... Canon PowerShot SD1100 IS Digital Camera

My daughters Canon PowerShot SD750 has the lens extended and stuck, turning on the camera gives a lens error message and atates to restart camera. have tried this numerous times and no help. Camera was never dropped, was just using one day, took some pictures, then the following picture I was taking lens stuck open.


Hi. This is an unfortunate mechanism failure. You can try to reset the micro board by removing the batteries for 3 mins. If that reset doesn't work, the actual lens sensor will continue ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Lens error, restart cameraI turn on my camera, and I get an error message stating Lens error, restart camera, the lens is open and will not retract, I have removed the battery and tried to restart. It will not go beyond the lens error message


Try these procedures. ... Canon PowerShot SD850 IS Digital Camera

Lens error, restart cameraI turn on my camera, and I get an error message stating Lens error, restart camera, the lens is open and will not retract, I have removed the battery and tried to restart. It will not go beyond the lens error message


This is probably THE most common problem with digital cameras. Try these procedures. ... Canon PowerShot SD850 IS Digital Camera

My CANON Powershot A470 is giving me the following error message: lens error, restart camera. Ive tried multiple times. I turned it off for a few minutes, nothing happened. I removed the batteries and memory card for a few minutes, nothing happened. I shook it easily...nothing happened. I vacuumed the lens and tapped the lens...still nothing.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot A470 Digital Camera

Lens doesnt come out gives message lense error restart camera


Try the procedures in this tip. ... Canon PowerShot SD1000 Digital Camera

Canon sx200 is, lens error restart camera, after taking some pics I wanted to delete them, so after deleting one picture I've got black screen and the message "lens error restart camera" and the camera turn off by itself. And there is no way to operate the camera after restart because it's showing me the same message as above mentioned.


HelloThank you for using FixYa for your problemAlways check the batteries first but if is it still giving the same fault, your camera is faulty. It should be taken to an authorized repair centre for a repair ... Canon Digital Cameras

My lens will not retract when I push power on/off switch. As a result it has ceased to function. The message it gives me in "lens error, restart camera". Repeated efforts at restart have failed to remedy the problem.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot SD1100 IS Digital Camera

When you turn the camera on it gives you an error message "lens error, restart camera" what's wrong?


If the lens is stuck out then you will find it is usually one of a few reasons.1. Check the batteries. (obvious I know).2. The camera has been dropped or knocked. ... Canon PowerShot SD1100 IS Digital Camera

On my powerShot SD 800 IS-Lens won't extend and retract properly-Seems to stick-Then camera screen gives me the message "lens error" Restart camera" which does not fix the problem..The last four or five pictures I took immediately before this started were very blurry..Please advise!!


Try starting the camera in > playback or picture view mode,and then go into photo mode extend and retract the lens (zoom) return to picture viewing mode and press the power button to turn the camoff.In the future use the > button to ... Digital Cameras

Ixus 75 Hi, I own a Canon IXus75. Last night while placing it on the table, it accidentally slipped off my hand and fell about 4 inches on the table. When I try to switch the camera on now, there is an error message saying "Lens error, restart the camera". What do I do? Please advise.


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try if the camera's no longer under warranty:\015\012\015\012 ... Canon IXUS V2 Digital Camera

Canon Powershot A590 IS GIVING ME A "LENS ERROR, RESTART CAMERA" MESSAGE. I have restarted and the message keeps repeating.


Mine is the same model and it was giving me this same message when I tried to start it up. "LENS ERROR, RESTART CAMERA". It's probably a result of you dropping it. I research it and could'nt find the answer anywhere. I got mad and upset because I use ... Canon Digital Cameras

Lens Error. Restart Camera. Camera gives this error message and then shuts off


How i would like a $ for everttime i have responded to this problem.There is dirt or sand possibly in the lens mechnism.try blowing it out with canned air and then slapping it lens doewn in the palm of your hand a few times turn on and see if t ... Canon PowerShot SD1000 Digital Camera

Today i went to a beach nad my camera fell in the sand. After taken it out when i switch on, the lens does not move at all. It is stucked because of sand and on the screen it says "lens error, restart the camera". So in order to get it fix, what should i do? for information, i bought it from best buy in houston last thanks giving.


Sorry to hear that shivamfc. You are an unfortunate Canon user with the unlucky results of digital camera + sand = dead.To make the camera to work again, you need to be sure to remove the sand that got inside the lens mechanism, unfortun ... Canon PowerShot SD880 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5044 seconds