Having problems with your Digital Cameras ?

I recently purchased a digital photo keychain the DP-151 & it didn't include software for the photoviewer in order to upload pictures. I'm using Windows Vista Home Premium & according to the operating manual it's compatible with Vista. It also says that the software should start automatically When the device is pluged in via but nothing happens. I would like to know what can be done to solve this problem?

Answers :

You can download the software on the link below.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I recently purchased a digital photo keychain the DP-151 & it didn't include software for the photoviewer in order to upload pictures. I'm using Windows Vista Home Premium & according to the operating manual it's compatible with Vista. It also says that the software should start automatically When the device is pluged in via but nothing happens. I would like to know what can be done to solve this problem?

You can download the software on the link below.\015\012\015\012http://www.cobyusa.com/?p=prod&prod_num_id=80&pcat_id=300 ... Digital Cameras

Pics on my My Nikon S600 will no longer download on to my computer via the USB cable. The 'Photo Wizard' (or similar name) pops up but immediately goes away again and a message comes up saying that the devices are not properly connected. This never used to happen. My Microsoft Outlook email has also started to open then go away immediately. I have restored all my settings but don't know what's wrong. Google etc still fine. Any clues as to waht i can do?

A couple of suggestions here, if you have recently switched to using WIndows 7 you will have to download drivers for your Nikon so they can read itl. \015\012If you have not changed any of your software or using the same computer, your ports mi ... Nikon Coolpix S600 Digital Camera

Camera fufifilmF40fd connects to computer but computer cannot access pictures -Device manager Code 19 says cannot start this hardware device because its configuration information in the registry is incomplete or damaged, could not load driver software. It says when i check the driver that the best software driver is installed and up to date. problem code 00000013 date 21.6.06, 6.0.6001.18000. Any solutions?

Two things need to be done :\015\012\015\0121. Uninstall all the drivers of your camera installed by windows, from the device manager. After doing that use a registry defragmenting software to rectify the errors in the registry. ... Digital Cameras

I am trying to download my pictures from my Canon IXUS 860. I have installed and updated the Canon software and it used to work. Now the Camera Window software will not start if I try and start it either automatically (when connecting the USB cable) or manually via the start menu. I have windows XP. There are no relevant messages in the event log.

Avoid the hassles and use a card reader to download your pics.\012 ... Canon PowerShot SD500 / IXUS 700 Digital Camera

I have a Panasonic VDR M50 GC video camera and I am unable to load in the Software My Dvd via my laptop which has Windows Vista Home Premium? I am also unable to transfer via the USB as it will not bring a picture up using 8mm Dvd-r

... Panasonic Digital Cameras

I can transfer images from my nikon d700 to my desktop. The Nikon software have been installed in my computer. Every time I switch the camera on, to start transfer. The computer system says installed "device driver" . Whats device driver and where can I install it from? thank you....syed

Your computer is looking for a mass storage device. Go through the camera menu system and make sure "USB Connection" is set to Mass Storeage, then Windows will automatically install the drivers. ... Nikon D700 Digital Camera

I have a C-3030ZOOM. Had a HD failure and re-instaled CM 2.01 and updated to V2.3 that is running MS OS XP Pro. The computer is unable to recognize camera. When I connect the camer to PC via USB - I do not hear the "Bong" sound when new device is added. Going to Contol Panel to add devise, it says that drivers for device not installed (Code 28). Hardware update wizard cannot locate drivers. Loaded W2000 drivers. Rebooted PC. Started Olympus Master V2.3 and went to file to upload images from c

Presumably you downloaded this, extracted files and right clicked inf file and clicked install?\012Did you then reboot and try to connect the camera? Connect then switch camera on? ... Olympus Camedia C-3030 Zoom Digital Camera

Model MFH-I-40, device software was not successfully installed. i have had this problem since i purchased. i have windows vista, sometimes i find the drive when I go to computer and see other devices, but not now. Also LCD does not display at all

... Digital Cameras

When i plug it into the computer there is a message that say that windows needs to install driver software for unknown device. and second problem is that it will only switch on when it is pluged into a computer, making it imposible to carry around

The second problem is that your battery is dead and you need to replace it.\012 \012the first problem is that you need to go to the manufacture ... Digital Cameras

Transfering Photos I'm using the USB cable provided to connect my XTi to my computer to transfer images. But the EOS Utility software is not allowing me to click on "Start to download images". Also, when I turn on my camera the LCD monitor says "busy" in the top left corner. What am I doing wrong?

Edmerk:\015\012In your case it seems like the software is the problem, try uninstalling it completly and reinstalling it back after a restart of your machine, also check this:\015\012 ... Canon EOS 400D / Rebel XTi Digital Camera

My Sony DSC-W130 camera when turned off will not turn back on until I remove the battery and reinstert . Also if the battery is not removed it will drain after a period of time. It is like the On/Off switch is not properly turning the device off and as such when you attempt to turn on again the restart function for the software in the camera does not execute properly. I have recently started using soem OEM batteries as well as the supplied SONY batteriers at times. . Maybe this is effecting

It may be a issue with the switch remained in on position ...blocked...or damaged...or ..something with the voltage of the batteries...if you noticed that the changing of the batteries lead to this behavior ..try the old stuff back again ..and see ho ... Sony Cyber-shot DSC-W130 Digital Camera

Digital Photo Keychain DP-151 operating sys Vista Home Premium, didn't include photoviewer software, nothing happens when connected vis USB, user manual says it should load automatic & works with my operating system. Please help!!

Hi,Check the Manual :-http://www.cobyusa.com/files/manuals/DP151_MN_151SX.pdfIt Clearly Mentioned, you need to have a CD. I am sorry, but i believe you are looking at a Wrong Manual or Some incorrect information i ... Digital Cameras

Down load Error message saying device is busy or not plugged in, everything is connected properly... also error when starting easyshare and program shuts down. I have removed and reinstalled program but still having same issue.

Try NOT connecting your camera to your computer. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or ... Kodak EasyShare C340 Digital Camera

I have a Olympus X-42 camera and currently use Olympus Master 2 to upload my photos. Half of my photos uploaded and now none of the rest will. It says ''Image failed to upload'' each time. It has also said ''device not ready'' many times. After I tried to open the photos via the disk drive d and it allowed me to I attempted to manually copy and paste the pictures into my documents. It would not allow me to do so, stating that the parametres are incorrect.After this happens when I check my : D di

Why not use a separate card reader and avoid all the problems? ... Digital Cameras

UI have installed Kodak easyshare Sofware when I had windows vista so then my hard drive crashed and I have had Windows 7 installed. Koda Easyshare software was accepted but now when I intal the cable to download pics onto my laptop, it says the device failed to install so as a result I cannot download photos. Please, what can I do to rectify this problem? Thanks.

Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Kodak EASYSHARE M1063 Digital Camera

Can't download pictures from my Canon Ixus 80 IS camera via USB cable. It appears to connect but there is no software options in the window and only option is to cancel. I aslo notice that the little green light flashes on the camera and then the screen goes off. The other downloaded canon software also fails to recognise there is a camera attached. I can down load my pictures via the card reader.This was working up until the end of March but my software crashed with the camera still attached an

... Canon IXUS 80 IS Digital Camera

Hi there. I am having a problem connecting my Canon Powershot A630 camera to my computer. My computer is running Windows XP and I have installed the software that came with the camera. When I connect the camera to the computer via USB cable the computer says "Found new hardware - Canon Digital Camera" and then the "Welcome to the Found New Hardware Wizard" opens up. It says Windows will search for current and updated software and then tells me to insert the Compact Disk labeled Windows XP Profes

Hi there,If\015\012 you want to download the pictures on your camera, try plugging it into \015\012the usb port of your computer using the usb cable. Then turn on the \015\012camera and make sure it is set to REVIEW MODE. Usually, ... Canon PowerShot A630 Digital Camera

Hi, I've just purchased a Pentax Optio S12 as a second camera (my first camera is a Pentax Optio S40). I'm trying to install the ACDsee software that came with the camera. I am familiar with this software as the 1st camera uses it (I already have a version on my computer) When I try to install it, I get an error message saying "Epson Scan cannot be started - do you want to open the troubleshooting assistant" If I say yes, the troubleshooting assistant opens (but there doesn't seem to be anything

... Aqua Pentax Optio S12 Digital Camera

I need the JVC GR-D270 software for my camcord and it also says to me to change my USB setting to disk drive I don't understand. Also every web page I look at they try to get me to buy some software to search for the right driver.

Hi,Required software cd is available in JVC Accessories Store under following part number for $32CR-ROM W/CAPTY MPEG EDITLY ... Digital Cameras

I have a new Panasonic DMC-FZ38 digital camera and I seem to have a problem capturing video footage to a PC. I can record video on the camera and it plays back on the camera quite satisfactorily. However when using the supplied software (Photofun studio 4 HD Edition) to transfer images to the PC it fails to recognise that there are any video images. Only the still pictures are transferred. I have tried using other software also and that also says there are no video images. I cannot find anyt

I recommend downloading quicktime player. This player is made for playing pics and videos from these cameras. ... Digital Cameras

Despite installing software on computer.when i connect the camera with the usb cable it comes up as unknown device. have tried reinstalling driver but no joy. have installed camera previously on another computer with no problems to start with then started to not recognise device on first computer. any ideas?

The pros never use the camera....they always use a separate card reader. You should too. ... Samsung Digimax V800 Digital Camera

Driver and software loaded but when I run the software it says "Device not Ready." Device manager thinks it's a "Coach" digital camera.

Open device manager \015\012start>run>devmgmt.msc>ok\015\012rigth click on the Coach digital camera and update driver let windows search the inter net for the soft wear. if you are unable to find beter softwear t ... Largan Mega 2 Digital Camera

I have no photos or recordings on my device and have checked both via my computer and the device itself and it shows nothing on it..yet it keeps telling me the memory is full and wont take any new pictures...what do i do?..also i cleared the memory via the OS screen..help??

... Gateway Pocket DV-S20 Digital Camera

My new Insignia Digital Photo Keychain won't load. I bought 2 of them, and both of them when I connect them they say ''connecting'' on the blue screen, but they never come up on my computer. My device driver says there is an error and it cannot upload the device driver. I don't know what to do to bring up this software if my computer won't recognize it when I connect it.

... Digital Cameras

Memory card I turn it on to auto, and it says internal memory is full...I press menu and it says reading memory card, then it says memory card requires formatting (continue or cancel) i click continue, fomatting will delete everything on memory card (continue or cancel) i click continue, it says formatting... then it says reading memory card...., and then it starts that all over agin, and im back at memory card requires formatting (continue or cancel) ??? I also tried formattiing it through the

I have the same problem!!! ... Kodak EasyShare C663 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3129 seconds