Having problems with your Digital Cameras ?

The zoom does not work on my hitachi hdc-1098 e camera and the menu does not come up as it should - manual says select 'camera' mode but there is no camera mode, only 'p' so when I press the menu button it doesn't work. Any ideas?


Answers :

The zoom does not work on my hitachi hdc-1098 e camera and the menu does not come up as it should - manual says select 'camera' mode but there is no camera mode, only 'p' so when I press the menu button it doesn't work. Any ideas
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The zoom does not work on my hitachi hdc-1098 e camera and the menu does not come up as it should - manual says select 'camera' mode but there is no camera mode, only 'p' so when I press the menu button it doesn't work. Any ideas?


The zoom does not work on my hitachi hdc-1098 e camera and the menu does not come up as it should - manual says select 'camera' mode but there is no camera mode, only 'p' so when I press the menu button it doesn't work. Any ideas ... Digital Cameras

We have a Fuji Finepix F420 that has had no accidents or falls. Suddenly it will only work in Play mode. In camera or videocamera mode it won't do anything, we can't even press the menu button or turn it off. I have emptied the memory card and fully charged the battery.


... Fuji FinePix F420 Digital Camera

Hi, My pentax optio WP don't work anymore. When i switch it on, it stops after 5 seconds. If i start it in read mode (blue button pressed whil i switch it on), it works, but the menu button dont't work and displays a yellow lock on the top of the screen. If i switch it on with the menu btton pressed, it displays ver 1.00 before to stop after 5 seconds If i switch it on with the menu and the blue btton pressed, it displays ver 36, then xxx test xxx and v 866-76 , 1.0001 before to stop after 5 sec


Some of those buttons work in combination with the two dials (i.e., setting ISO and white balance, etc.). Hold a buttin down and user the knobs simoultaneously.If this is not the issue, please describe specifically which buttons are not workin. ... Pentax Digital Cameras

Hi. I have a Canon Xsi/450D Camera. I can access the menu funtions when in the preset modes eg. landscape, sports etc. but when i rotate the dial past the Auto mode into the manual settings modes(the creative zone as canon calls them) the menu funtion will not work. I push the menu button and nothing, the remote funtions will not work either. I've tried to update the firmware, but as you have to access the menu in the manual modess to do this i cant update the firmware either(also cant do


The manual mode runs off power from a separarte capacitor. The capacitor holds a charge which is greater than the voltage of the battery for the needs of this option. When a capacitor fails nothing will operate in the manual mode. You will need to ha ... Canon EOS Rebel XSi Digital Camera

The mode dial doesn't seem to work. The camera is stuck on the high speed sequential setting. When we select iauto, it takes one picture and then freezes. When we select the camera option on the mode dial, it takes 13-15 pictures in succession and then freezes. The pictures are taken without the button being pressed. We need to power off to change modes. The camera did work for a little while.


Base from the description of your problem what we can do here first to correct the problem is to reset or restore the camera settings to its default from the camera MENU. Then once you done that check if its working fine now. ... Olympus Digital Cameras

I just got my camera for christmas. The review mode is working normally, but I cannot get it to take pictures. Last time I used the camera was a few weeks ago, and it worked fine. When I chance it to the camera mode and press on, olympus appears on the screen, it makes a few sounds, then turns off.


HelloOk the problem you are experiecing is a lens error. In practice we test a lens error by either looking at the error code displayed, or, putting the camera in review mode.If the camera works in review mode, where the lens ... Olympus Stylus 720 SW Digital Camera

I have a Kodak Easyshare model dx5430 digital camera (5mp). It has worked like a champ for years. Last night I was at an event when the image display went dark at picture 31. All preceding photos were able to be reviewed. The camera flash works fine. The camera displays all the other characteristics of a working unit. It turns on and off; the flash works, the menu is accessible - everything. It just doesn't register any photos. Even in close-up mode, there is nothing. It's as if the lens cap is


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very ... Canon PowerShot A75 Digital Camera

Camera shuts down after shutter button is pressed. It shuts down halfway through the shutter operation. Everything else works fine-reviewing pictures, settings in menu, focusing, exposure settings etc. The camera focuses ok when the shutter button is half pressed then when you press the shutter button fully, the mirror goes up, shutter appears to open then the camera shuts down with no power. Only way to get mirror etc back to normal is to remove the battery and refit. When camera is turned b


... Canon EOS 40D Digital Camera

Displays all white in all modes. Kodak V570. Turn the power on and all I can see is white. I have tried a different battery an no battery, just power cord. I know the camera good enough I can go into the menu options and select some different features without actually seeing the menu. All that seems to work fine and the lens is working ok. I can push the shutter button, the flash goes off. I can't see the photo on the camera, but I can see the photo if I put the SD card into my computer. Please


Displays all white because all the color screen have RGB mode if any of mode's are not work correctlly it's mean's color chip was fail and not working. u have to repair ur camera and change ur display screen. ... Kodak EasyShare V570 Digital Camera

Camera Frozen When I turn on my DMC-FX07 none of the buttons work. The zoom doesn't work, the menu button doesn't work, the flash settings dont work. It won't switch from current picture when in viewing mode. I have tried all the picture wheel settings and every one is frozen. I have trie pushing and holding every button and removing and replacing and recharging the battery several times. When I replace the battery the autofocus works but then it freezes (when in heart mode) with the backli


Hi,I tried Option No.1 successfully when my Panasonic DMC-FZ7K froze once:Option No1:1. Try turning the camera on with the battery inserted.2. Now remove the battery while the camera is on. ... Panasonic DMC-FX07 Digital Camera

My sony DSC-H50 looks like crazy. I was taking some photos and videos, suddenly the camera was not able to make videos, it was only in standby mode. I pressed some times the button to start record but the camera did not work. I restarted the camera a lot of times and it start to work, but a I lost the old photos and videos. When I try to download the photos appears some strange folders in the camera, like ▀∙╥∙2.+6π. How can I recover my old photos and videos? Thanks


Google on "free picture recovery software" - sounds like your card got corrupted. There are quite a few programs out there that work as well or better than the you pay for it ones do. ... Sony Cyber-shot DSC-W50 Digital Camera

Lumix tz3 Please turn camera off and then on again" as soon as camera is switched on. I Can view any menu, or read SD card, but cannot take any pictures. If I turn on in a picture taking mode it starts to focus and then the message appears, when I turn it off the lens does not close. If I turn on in playback mode, it works fine, if I turn it off from playback mode, then the lens closes. Basically, any picture taking mode triggers the error message. Solution?


Low battery maybe? Try holding camera firmly in one hand, with camera on and in record mode, and strike in on its edge firmly on the heal of your other hand. This technique is often sucessful with temporary camer 'quirks' like freezing, lens not full ... Panasonic Lumix DMC-TZ3 Digital Camera

Canon s2IS when I turn the camera on in review mode the LCD screen displays pictures one after another. Cannot stop the picture review except to turn off the camera. In camera mode the menu button and other buttons do not function. The problem occurred while I was pressing and holding down the LCD review button and viewing hundreds of time-laps pictures I had taken with the camera.


Hello,\015\012Please do the followings.\015\012\015\0121. Turn off the camera.\015\0122. Remove the memory card.\015\0123. Remove the batteries.\015\0124. Wait at least 3-5 minutes.\015\0125. Place the memory ... Canon PowerShot S2 IS Digital Camera

My Olympus 7010 is fully charged. When I turn the camera on ready to shoot a picture, the card reader light blinks and the camera shuts off. Camera works fine in menu and edit modeds so it is not the battery or the contacts. Only shuts down when in camera mode. Advice ?


I fixed the problem by pushing the lens just a bit from the side when turning the camera on. ... Olympus Stylus 7010 Digital Camera

I have a Panasonic DMC-LX2 digital camera, I'm based in the UK. Has worked fine for a couple of years, but 2 weeks ago, when powered up, none of the buttons work. Screen is illuminated, lens emerges OK, mode-select dial still rotates and switches between modes, on/off switch and aspect switches OK, but shoot button, all 5 'menu group buttons, anti-shake button, display/LCD mode button, waste basket buttons', zoom in/out control and 4-way direction button all 100% non-functional. Card is being ac


I just got identical situation today, and I have no clue at all. However, I figure that the camera is actually working busy like someone is holding the "UP" button continuously. To see this, power on your camera at any mode except the "Scene mode". A ... Digital Cameras

Compatability? Hi, My new Sony DSC-W80 camera is not recognized by my computer (running Mac OX10.3.9).  The camera and cable are fine, since my PC has no problems.  The message on the camera reads "USB Mode Connecting... Switch on [MENU]".  WHen I go to the menu, it gives me different ways to connect to the computer, none of which work.  Any suggestions?


I set the USB to PictBridge mode (press home button, then main settings). Now iPhoto recognizes the camera and I can import photos. \015\012 ... Sony Cyber-shot DSC-W80 Digital Camera

Faulty d40x hi i bought a d40x off ebay the other day and couldnt wait to start snapping.... problems: - The error message "initialization error. Turn camera on and off again" appears. Upon turning the camera off and on again, the same message appears. After several times trying it still does not work. Also, the menu screen appears, and just keeps flicking from menu to menu constantly. As well as this, on the playback mode, the picture of the image displayed keeps zooming in as far as


I would start by looking at all of the push buttons on the camera. One may be stuck down. ... Nikon D40x Digital Camera

Power/lens Problems I'm having some power/lens problems with my camera. When I turn on the power in either the picture or video mode, the green light will turn on for a split second then turn off. The lens does not come out at all. However, when I try to turn it on with the picture viewer or in the menu it works just fine. When I start with the picture viewer and then switch to the camera it turns off. Thus it seems that whenever I want to take a picture or a movie the camera doesn't work.


It seems that the lense movement is jammed. Have you dropped the camera? just have a close look from the front side of the camera, does the lense assembly seems to be pressed or moved aside by some extra preassure? if no physical disalingment is vi ... Sony Cyber-Shot DSC-P72 Digital Camera

Using my Canon XSi/450D, I'm interested in doing High Dynamic Range photography. But I can't discover how to make the automated shutter-speed range multi-shot (3 for the 450D) AEB work. I've gone into the menu and select and change the AEB range ( -2V) and pressed "set." Working from the "AV" in creative mode, I then set up my first shot with focus and ISO, and shoot. Now what? When I press the shoot button, an ordinary photo is captured, and if I continue to press the button additional cap


Click on this link http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=139&mod ... Canon Digital Cameras

MY FUJIFILM AV1OO DIGITAL CAMERA IS NOT WORKING PROPERLY AS SOON AS BATTERY IS INSERTED IT GETTING POWER ON AND TAKING TO PLAY MODE. FOR SHOOTING MODE IF I PRESS SHUTTER IT BLINKING RED LED AND SHOWING "PRESS SHUTTER BUTTON FOR SHOOTING MODE" NOTHING HAPPENING


... FUJIFILM FinePix AV100 Digital Camera

My trio t3000 got stock in my camera when i took picture and after of getting photo i pressed the main menu and for another icon the menu is no longer working, i keep on pressing the menu and power the does not release for off


Hi.This player offers only basic options, there is no hard reset combination. The only reset us Restore System settings in the settings menu.If the icons result out of place, then do calibration from menu in settings (see manu ... Digital Cameras

HI Have been useding a 450D for sometime now with excellent results. However, this morning I hooked it up with my 550 EX Speedlite and it was working fine. However, since I removed the Speedlite I have had problems with the camera. The camera as not recognizing when I press the shutter down at all in fully automatic mode.i.e. nothing happens when I press the button down In other modes that camera only functions when I change the focus to MF on the actual lens [have tried differen


Try resetting the camera by removing the batteries for about 15 minutes. that should sort it out ... Digital Cameras

When I switch the camera on the screen stays blank even though the lens comes out, it eventually goes off (with the lens still out after about 40 seconds). I can get the camera to work if I press the green "view" key and then, after the picture appears, press the red camera icon and it will go into auto shoot mode. Happens every time now. I can't take it in under warranty as it was a present and I don't have the receipt unfortunately.


Replace the batteries then check ... Olympus FE-170 Digital Camera

Horizontal purple bar on LCD in camera mode. Have changed batteries. Used different batteries. Different memory cards. LCD works normal except in camera mode. When shutter is pressed purple bar shows on LCD


When you change the mode to camera, the sensor of the camera begins to work. Unfortunately your sensor is dead from now on. This kind of sensor, I mean point and shoot camera sensors always do that. There is nothing to do. The sensor life and the qua ... Canon PowerShot A95 Digital Camera

Sony camera turns on but screen is just bright white, can't see the images I'm taking or the menu. I can press the menu buttons and can tell that the buttons work because I hear the beeping noise. But I can't see anything. I also try to take pictures and I don't think it is taking any pictures because when I plug the camera into the computer nothing new shows up on the memory stick.


Check the contrast setting make it default or 50/50 ... Sony Cyber-Shot DSC-S40 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3541 seconds