Having problems with your Digital Cameras ?

Camera powers up and then immediately shuts back off. put new batteries in it and no change

Answers :

Fixing a Lens Error on a Digital Camera
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Camera powers up and then immediately shuts back off. put new batteries in it and no change

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Digital Cameras

I have a Kodak ZD 710. Using rechargeable NiMH. Was taking a photo of a shiny surface towards the sun in 86 degree weather. Took 2 good shots when suddenly camera shut off. I turned it back on but it shut off again. Turned it on again and screen wanted me to change date format and then immediately shut off again. Next it would not turn on at all, no power. I changed batteries. Still no power. Removed batteries and 4 Gb memory card for several hours. reinstalled but still no power. Today is

Is the lens still sticking out? It usually retracts when it turns off. let me know ... Digital Cameras

Change Batteries....? Hi there, I have owned the Canon A 95 for almost 2 years now. Since a couple of weeks back its not been working at all. It keeps saying "Change Batteries" even after i put in a new set of batteries. After a few seconds of turning it on, it says Change Batteries and shuts off. Triedputting in new batteris a few times but still no luck. Any help would be highly appreciated!

Ok.. did you guys try a reset? Just remove the batteries, wait for 60 seconds then put them back in.. that should reset the camera.. ... Canon PowerShot A95 Digital Camera

Black screen I got a brand new DSC-650 and when I put it on, all i am getting is a black screen. Sometimes when i put it on, the power just shuts off, leaving the lens opened. I have to take out the batteries and put them back in and wait until a day past before putting it on so that the lens could close in back. I need help!!!! Its irritating me.

Sir,ur camera AV shutter properly not working or CCD problum this is repairable u try ur local service center ... Sony Cybershot S650 Digital Camera

Just got a brand new NEVER OPENED '06' cuddeback Expert model C3300 from a store that never sold it. I put in new batteries and a 256MB CF card and went thru the setup..put in my name a passcode..set the delay blah blah blah....heres the problem..everytime i turn it on the first thing the screen says is "do not remove card" immediately..it keeps flashing this for like 3 minutes. then shows me images taken and I can change from standby to live or scroll thru the setup..but once it goes back to t

Hi gtepwisc. I just bought a Expert also and the problem was similar. My package was opened and I paid $150 at The Farm. They told me not to worry, anything wrong with it and Cudde would take care me, as it should be warrantied for a year. YEAH RIGHT ... Buck Cuddeback Expert Game Camera

Battery Problem My 18-month-old Canon A70 is giving "change the battery pack" message and turning off constantly, even though I have fully charged three different sets of new rechargeable batteries and rotate them as soon as the message comes on. Sometimes with this message I pull out one charged set and put the same back in, and it works fine for quite awhile, then repeats later. I imagine this is a problem in the camera battery power circuit or something. Never happens when plugged into the co

I figured out the problem. My AA battery recharger was not making good contact, so although it said the batteries were recharged, this was not the case. After fixing this and getting full recharges, the problem went away. ... Canon PowerShot A70 Digital Camera

Powershot A640 Could Not Be Powered On, Burnt Smell My Powershot A640 died during a picture shot, lens remaining open. I thought it may be due to the dead batteries. But after putting new batteries and pushing the on/off button, the on/off indicator blinked once then shut off by itself. After a while, a strange smell came from camera batteries area, and I could feel warm there too. Immediately I took out all the batteries from camera. When checking the posts here the other day, I tried one

HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Canon PowerShot A640 Digital Camera

Hello, I have a Kodak easy share z1275 and has worked well for me for almost 3 years. Used it last week with no problems, has never given me any problems. Suddenly on Saturday, I turn it on to take a picture, lens begins to retract and the camera shuts off, it appears that there is a power supply probelm. I changed batteries, even though the ones I had in it were recently installed, but went ahead and put in new ones, and it will not power on. The blue power indicator light begins to come on

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak EasyShare Z1275 Digital Camera

We just received our brand new canon t3i in the mail. We formatted the card (a 2GB 700X Professional High Speed Error Free (SD) Memory Card Class 10) and immediately started shooting to test out the camera. Everything seemed to work fine until we tried to apply a filter to one of the photos. The entire camera froze. We even tried turning the camera off and it would not shut off. We ended up having to take the battery out and put it back in. When we did and turned the camera back on we received a

Sounds like there was an error while the camera was writing information to the card. You can try reformatting the card using a computer and a card reader, then replace it in the camera and format it from the menu. If that doesn't work and the camera ... Canon EOS 600D Rebel T3i Digital Camera

Vivicam3705 new batteries several times. camera comes on when power is pressed when batteries are 1st put in. then goes to setup time/date screen, complete that and vivitar shutdown screen comes up and camera shuts down and can not get it back on. please help me

BUY A CASE OF BATTERIES, YOU WILL NEED THEM\015\012 ... Vivitar ViviCam 3705 Digital Camera

Canon I have a fairly new 1 1/2 year old canon power shot A530. It keeps saying the batteries are low even with new ones in it. It says to change them then shuts off. If I turn it back on it may be ok for a short time then says they are low again. Any suggestions?

You need to power it with rechargable batteries. with the MAH being no less than 2000. I bought a charger which came with 2batteries for less than a tenner ... Digital Cameras

Change the battery pack when new battery pack is inserted. We thought it might be our charger or the battery pack is just old. So we bought 6 new batteries and charged them on our firends cannon power shot charger put them in her camera and had no problem. We then put them in our cannon and received the change battery pack display with in minutes on some and instantly on others. Is there a issues with the connectors? The latch mechanism that holds the battery in and the ejector spring are also f

... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

I have an Olympus e510 bought new 2 years ago. When I put a memory card in it shuts the camera off. I then take out the battery and put the battery back in it without the memory card in and it says no card, but when I put the card back in it shuts off the camera again.

Any camera should be turned OFF before installing or removing any battery, memory card, flash, or connecting cable. ... Olympus Evolt E-510 Digital Camera

I keep getting error 99. I've cleaned the sensors with a new eraser; I've changed the battery and changed the memory card. If I take out the battery and put it back in, I can take a picture. If I pause for about 30 seconds between picture, I get the error message again and then have to take the battery out and put it back in again.

Hello:\015\012\015\012Here is what Canon said :To isolate the cause of the issue, we suggest that you do the following:1. Turn off the camera.2. Remove the lens, battery, and CF card.3. Allow the ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Canon S2IS Either screen is dark when I power up the camera. I can see previous images but I cannot record anything. Sometimes I can reboot the camera and it will work for a shot or two, but currently even that does not work. I have changed batteries with no good results. They power up everything but do not affect the recording of pics. Jeff Canon S1IS have problem with dark screen... I have a brand new Canon PowerShot A560 Digital Camera. I put in brand new batteries. On after shooting n

Your camera has the know issue of Stuck shutter, whichhappens after some time (weeks or months) thata camera is notused.\015\012\015\012Unfortunately the repair of it requires a complete disassembly of the camera, including the lens, fix ... Canon PowerShot A560 Digital Camera

Sony Cyber-shot DSC-H2 turns on sporadically. Once on it works fine. Shut it off and try to turn back on and it doesn't. Repeated pushing of the power button maybe 30-40 times and it turns back on again. Once you get it on it Works fine. Turn off and when you want to turn it on again must push power button over and over to get it on again. This happens with brand new batteries and with rechargeable batteries that have been fully charged. Any assistance would be appreciated. Doug Clark

Hi,It seems power button is not working properly and needs little force to send command to camera.Please press PLAY button on camera (it is located nearby power button) and check, does camera turn On in playback status instantly or giving ... Sony Cyber-shot DSC-S700 Digital Camera

Hi i have a CANON A1000 IS and I just got it a week ago and the batteries lasted me 2 days. I tried charging my camera but when i went to turn my camera back on it said low batteries then immedietly after the screen went black and at the bottom it said change batteries. So I put in new derecel batteries and i turned it on and it showed the same thing. low batterie then change batteries right after. Do you know whats going on with this thing? How do I charge the camera?

Hello,\015\012Are you installing Nmh (Nickle- Metal Hydride) rechargable batteries?\015\012If not then your camera probably will not recharege them.\015\012Also trying to recharge non rechargable batteries can cause damage to the ba ... Canon PowerShot S100 Digital Camera

I changed the batteries in my Power Shot A720 IS recently when the low battery warning flashed, and had taken only two photos when the warning flashed again. I moved the mode switch to playback and the screen went dark "Change batteries now" appeared. I turned off the camera, set the mode switch to shooting, turned the camera back on and was able to take two more photos before the low battery warning returned and prevented any more picture taking. I purchased and installed new batteries and f

Hi, 1st you must use alkline bat or minimum 800 mhp bat....and if problem is not solved then cheak the bat cap and connection clean with aomthing,,,,If any thing else contact [email protected] ... Canon PowerShot A720 IS Digital Camera

I was Importing some pictures to my computer from my Canon sd 1300 is powershot digital camera , When the Battery died , I was not in the room at the time , So I came back in and attempted to turn the camera on and it said "Please change the battery pack" which means I need to charge the battery , and When the camera shut off , The lens did not close . SO I charged my battery , and the next day , I put the battery back in the camera like normal and I turned it on , and on the screen it said "Len

Since your camera is new the priviledge of your warranty claims must not be lost. So do not tamper to lose this benefit but call up the call centre of Canon for registeration/advice. What you can do is to remove the battery and keep if off . Since th ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

I have a STC-I430IR Digital Scouting Camera. My issue is I got it out today and put new batteries in it because the batteries from last were dead. When I changed the batteries the menu screen came on perfect for a couple seconds then the screen keeps bleaking and will not stop. Take batteries out and put them back in same thing screen work great for couples seconds them start bleaking again and will not stop. What is my problem?

... Digital Cameras

Battery problem My camera is about 6 months old. Dead battery. Put in new ones, more new ones and charged, rechargable batteries. The camera immediately says ,change the battery and turns off...

Remove stain from batt. location , spray it WD40 inside batt. compartment then use NiMH batt. enelop white color ... Canon PowerShot A570 IS Digital Camera

Blank screen i was taking photo and i think the battery went off and the lense could not go back inside, it took like two days for me to replace the battery. When i put a new battery, later the screen went back inside but caanot open. the screen still black. when i press the on button, it shows the power on the auto only and cannot show any picture. what could be the problem? thanks

Ssue:\015\012\011\011The LCD/Electronic Viewfinder will not display an image or the image is distorted.\015\012\011\015\012\015\012\015\012\011\015\012\015\012\011\015\012\011\015\012\011\015\012\011\011\015\012\011\015\012\0 ... Canon PowerShot A520 Digital Camera

Says change batteries and I have put new batteries in 3 times. This came on all of the sudden. Also, I noticed that you can review picutres etc, without the camera shutting off and wanting you to change batteries. Seems to only do this in the picture taking mode. Please help. Tbone44

Go to canon.com and download the firmware update ... Canon PowerShot S51S Digital Camera

Whenever I put new batteries into my Canon Powershot A480, I get the same thing - I get the 'Low Battery' red flashing light. And Then as I go to take a picture it shuts off and says ; Change The Batties. I've gone through packs and packs of brand new batteries and still the same thing. I've resetted it, and still.. nothing. Please help !

I've got the same problem with 2 A 480 canon. I put in NiMH batteries and they work fine. If you put in slightly drained used batteries they work!! Nimh batteries are 1.2 volts and Alkaline are 1.5 volts. There is definitly a problem with thi ... Canon PowerShot A480 Digital Camera

Eos 300d will not power up. charged new battery, no help. Checked CF pins, all ok, no change. Replaced back up battery, didn't help. Still will not power up?

... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3042 seconds