Having problems with your Digital Cameras ?

My Kodack m340 just stopped working the lens is

\015 My Kodack m340 just stopped working while I was using it. The lens is open and it will not go in. It turns on and immediately off. Bought new battery thinking that was the problem and it is not.\015

Answers :

Fixing a Lens Error on a Digital Camera
\015\012
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Kodack m340 just stopped working the lens is


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Digital Cameras

I'm a new user of the D90 (and digital in general), and on my first major trip with it I had problem with the shutter not working. I would take some images, put the camera down without turning it off and move on to the next spot. At the second stop the camera would not work. I'd turn it off, remove the battery, run the lens in and out and eventually it would work again. The message I got was F--, which said that the lens was not installed properly. However the lens was never removed. What's


George,Since you didn't say if this was a "new camera & lens" or if it was a "new to you" camera and lens, or which *exact* lens you have, there are a couple of ways this can work.Nikon lists the following remedy for error ... Nikon D90 Digital Camera with 18-105mm lens

My D80 was purchased in April 2008 along with the Nikkor 18-200mm VR zoom lens. The camera and lens worked flawlesly until this past week end. The cameral stopped focusing in auto mode with no warning. I did hear a whining noise when I tried a Tamron 11-18mm wide angle lens. The auto focus did not work with that lens either.


Make sure your AF-switch on your camera and your lens are both turned on. ... Nikon D80 Digital Camera with 18-135mm Lens

Canon Zoom Lens ef 28-90mm 11:4-5.6 digital suddenly stopped working. It works on manual but not auto. It worked fine one day and then the next for no obvious reason it stopped working. Any suggestions?


Does the lens have an aperture ring and is it set to "A"? ... Digital Cameras

Lens error I have a Canon Powershoot SD1000 and it was working fine until one day the lens stopped retracting. Now it doesn't retract and I get a Lens Error, Restart Camera message. I looked at other websites to get help and tried some of the ways they suggest to fix it. Not sure if its working, because it still gives the same message and makes a noise sounding like its trying to retract then gives me the Canon welcome picture. I've only had this for a little over a year and would like it to be


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon IXUS V2 Digital Camera

My kodac Z1285 stopped working and the whole lens is out, after i clicked the power it started ok then i zoomed in, after the lens is completely out ''maximum zoom'' it stoped working and never come back on. the batteries is fully charged, although i tried another fully charged batteries i was thinking just to go to the screws and open it to see what is happened but i don't know, what shall i do?!


Don't open it!! That will void any warrenty the camera has! Have you tried cleaning it with Denatured Alcohol? You can puchase it at any store with a hardware dept. Just soak a q-tip in the alcohol and swab the camera down. It's safe to use on the sc ... Kodak EASYSHARE Z1285 Digital Camera

My Ricoh Caplio R4 will turn on but the lens stops half way. All data comes up on screen, but you can't clear any of it. Then after about 10-30secs, the camera turns itself off and the lens is stuck half way out. Battery is fully charged, was working properly, then just stopped. What could be the problem?


Hello Mar LizThis is a fairly common error with most digital camera's .This either means that something is jamming the lens , or that the\015\012lens sensor is faulty. Given that the lens is stuck halfway , we can rule out a sensor proble ... Digital Cameras

I dropped my kodak camera on the ground and it stopped working. The zoom lens was not working and it stopped taking pictures.


Try to switch on the camera then push the zoom button while gently slapping the camera (it wil help only if rings are not broken ... Kodak EASYSHARE M340 Digital Camera

Lens error message, bells, and lens goes in and out and stops out. Remove and replace battery and press play and get picture, press camera and lens goes out and LCD works for a few seconds and then goes dark. No way to retract lens except remove battery and reinstall and press play then battery out.


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Casio Exilim EX-S500 Digital Camera

I have a Nikon D70 (with a 18-55mm lens) and have always used it in Auto mode. It suddenly stopped working in auto mode...won't take the picture at all. Did I break the lens??? If I tip the camera back and forth the lens will move (zoom in and out) by itself...don't remember it doing that before??? Fixable or do I need a new lens?


Hi tina549, do any of your other lens auto focus? If so then it may be this lens. If they do not then look on the right side of the lens mount (with camera facing you) there is the AF and M switch. Something to try is clean the electrical contacts on ... Nikon D80 Digital Camera with 18-135mm Lens

Canon A95 stopped working with lens open


Ur lens belt is broken relace it or write to me ... Canon PowerShot A95 Digital Camera

Nikon s60 says Lens Cover Error and won't work. The lens cover suddenly stopped moving down to expose the lens.


... Nikon COOLPIX S60 Digital Camera

3 beeps One day my camera was working fine. The next day, I tried to turn it on and the lens came out just a little and then it stopped and beeped three times. It now makes this noise everytime that I try to turn it on. It did this before when the lens was uneven. However, the lens appears to be in proper place so I don't understand why it is doing that.


After some attempts to turn on the camera following the instructions posted in this page, i just bang the camera when y press the start button, and the lens was released, and the camera start up with no problem :) ... Samsung Digimax D53 Digital Camera

Lens error Hello. I've had my camera since October now, and of course it's fallen a couple times or been bumped into things, but it's always worked fine afterwards. But tonight, I had it on my tripod, which apparently isn't as sturdy as I thought it was, because it fell straight forward. My lens fell right on the concrete. It is like, visibly crooked now, not much but you can tell, and every time I try to turn it on the lens tries to extend but then it just stops, the screen goes black for a sec


You will most likely need to send the camera in for service. There really is no way to repair this problem on your own.Since you are not out of your 1 year manufacturer's warranty, you will not yet qualify for the upgrade program, however Canon ... Canon PowerShot A540 Digital Camera

Lens error hi my camera stopped working the other day...it turns on but the lens wont come out and it says there is a lens error then shuts of....is there an easy way to fix this?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Kodak Easyshare M753 Digital Camera

Hi, the camera worked fine for years and one day the camera stopped "seeing". The 1" screen works fine but the camera doesn't see light or the scene and will not capture images. It seems like it wants to work but doesn't. It acts like I left the lens cover on it. dave


This is the most common problem with digital cameras.\015\012The shutter is stuck in the closed position. This is most likely due to moisture residue built up over time on the shutter leafs. You will need to have the camera serviced to have eit ... Fuji FinePix S5000 Digital Camera

Lens error my Camera is Canon IXUS 860 IS. while i was taking picture the lens stops working properly and it says lens error, restart the camera at left bottom of the camera screen.


Have same problem as above. Apparently the gears in the lense slip a tooth, they can be re-aligned but this involves taking out the barrel, my question is, how do you do this as I don't want to pay Canon the AU$250 for a new barrel. ... Canon IXUS 860 IS Digital Camera

Was working ok till last nite try to make it work on top of a shelve, felt down, but wasnt that hard, though it freeze out, on image and also all buttons stop working, not even posible to turn off, or put the len back in


Sorry, but lens assemblies are fragile, and there's no safe or simple DIY fix. In fact, any attempt at homebrew repair will likely make the damage even worse. I suggest you take it to a local camera shop (NOT the camera department at a chain store) ... Polaroid M635 Digital Camera

Heya i have a cannon powershot a480 and i got it near christmas time and when i turn it on it says "Lens error, restart camera" and i keep trying but it doesnt work, I took it to the beach the othe day and i think it may have a tiny bit of sand inside it but it work for a few minuits after it got sand in then stopped working Please could you help me? Thankyou <3


Fixing a Lens Error on a Digital Camera This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “le ... Digital Cameras

Camera just stopped working. the lens is extended


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Fuji FinePix 2800 Zoom Digital Camera

I got Fuji - finepix, AV 150. camera lens stopped, in the middle. Not working.


... Digital Cameras

My camera stop working and the lens don't


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SD800 IS / IXUS 850 IS Digital Camera

Camera simply stopped working. lens extended and


If ur very sure that the battery is fully charged... first we would advice you to change the batteries and see ...... if that doesnt work... the battery contacts may be corroded or bent and hence not making correct contact with the battery ... Canon Digital Cameras

My auto focus just stopped working. changed lens'


... Olympus Camedia C-350 Digital Camera

CAMERA JUST STOPPED WORKING WITH LENS EXTENDED. I


Hi,How Old the Unit is? Pull out the Battery and Put that Back in after few minutes. Check, if that could work?Any Error Message on the Display?Let me know, so that we could proceed.Hope i h ... Casio Exilim EX-S600 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2000 seconds