Having problems with your Digital Cameras ?

Canon Sx120 IS camera will not zoom closeup from a tripod at 19" set at macro!!! Instructions say the camera cannot focus in the range of the yellow bar, well how do you get away from the yellow bar? Which will also result in removal of the macro setting! Any zooming to get closeup blurs out of focus no matter what I do and that's when still within the optical zoom range. Taking pics of coins and need to zoom in and get really close, as advertised. Tripod is set at shortest distance, 19


Answers :

Take it to a repair shop.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Canon Sx120 IS camera will not zoom closeup from a tripod at 19" set at macro!!! Instructions say the camera cannot focus in the range of the yellow bar, well how do you get away from the yellow bar? Which will also result in removal of the macro setting! Any zooming to get closeup blurs out of focus no matter what I do and that's when still within the optical zoom range. Taking pics of coins and need to zoom in and get really close, as advertised. Tripod is set at shortest distance, 19


Take it to a repair shop. ... Digital Cameras

Canon Sx120 IS camera will not zoom closeup from 19" away!


I think you are using the autofocus option. The shutter button on this camera has two levels. If you push it halfway then the camera will automatically choose all the settings such as brighness focus etc., You should focus on the object manually and ... Canon PowerShot SX120 IS Digital Camera

Hello. I bought my Powershot SX1 IS in April 2010, and have never felt I could get good photos with it. The 'noise' seems bad, when I playback and zoom in just one notch, definately worse, the more I zoom. The color is often poor, and the focus on close-ups is not sharp. Would you say this is the best this camera can do, or would you say there is something wrong with this particular one. (I always have it set at highest resolution , often 100 ISO, try the set of three exposures to get diffe


Hi,You will get more information about this camera on the link belowReview LinkAnd yes, your doubt is correct. It is because of the ... Canon PowerShot SX100 IS Digital Camera

Viewfinder focus I am unable to properly focus using the viewfinder and see a clear focused picture even with trying to use the opitcal zoom. However, I have no problem using the lcd and adjusting the optical zoom to get a clear picture. is there something wrong with the lense or have i inadvertently set a function on the camera.


Mickykay, Have you tried focusing the diopter? The focus wheel is just left of the viewer. If you know all this then consider one more thing. There is a plus and minus setting for your eye so roll the wheel slowly to not miss the sweet spot ... Panasonic Lumix DMC-FZ50K Digital Camera

Having a hard time getting the camera to focus when zoomed into a small feature (say 1 inch in size). Is there a special mode setting required to get the AF to work at this distance?


Set your camera to Macro Focus. See page 43 of this manual. ... Casio Exilim Pro EX-F1 Digital Camera

Olympus SP-550 UZ won't focus properly most of the time. Focus point should be infinity since my subjects are seascapes, sunsets and clouds. I've tried all 3 AF focus modes but none work consistently. I can get it to focus sometimes if point the camera at the ocean first. I've even tried manual focus but it won't focus to infinity. This camera is practically new, has never been dropped. Is this a known problem with this camera? Is it a settings problem (I've reset the camera to factory settings


... Olympus SP-550 UZ Digital Camera

I have the standard 18-55 zoom lens that came with the Nikon d3000, and now no matter what autofocus setting I have the camera will not autofocus. Manual focus is fine though. I do tend to switch lenses fairly often. Please get back to me as soon as you can


The kit lens sold with the D3000 has 2 switches. One is for Vibration Reduction (VR) "On" & "Off" and one directly above it for Focus marked simply "A" and "M" (Automatic and Manual) See the image below: ... Nikon D3000 Digital Camera

I recently bought a canon 450 and zoom lens, i took it to my sons football match and tried to get some action shots but they just came out in a blur or out of focus, so i set the camera to tv and 1/4000 and it came out all dark what can i do, Thank you


TV is a setting that controls the time. 1/4000 is a very high speed and the image will be dark. You could use 1/500 or 1/1000 as your speed. the slower speed gives more light for the exposure. When you go slower you may get some blur. Also make s ... Canon Digital Cameras

I receive the E:61:00 error on screen, and the screen will not focus. I shook the camera around (per forums) and the screen focused for a minute, but would not zoom in out out. When I tried to zoom either way it would make a whirling sound. I opened my camera to have a tiny little piece, with "C 805" inscribed on it, to fall out. I do not know where this belongs, and still can not get my camera to focus. Help!


Hi,The E:61:00 error code displayed on the Camera screen indicates that a Camera malfunction that you cannot reverse has occurred. This seems to be an internal malfunction of the Camera. You may try power resetting the ... Digital Cameras

Camera shuts down after shutter button is pressed. It shuts down halfway through the shutter operation. Everything else works fine-reviewing pictures, settings in menu, focusing, exposure settings etc. The camera focuses ok when the shutter button is half pressed then when you press the shutter button fully, the mirror goes up, shutter appears to open then the camera shuts down with no power. Only way to get mirror etc back to normal is to remove the battery and refit. When camera is turned b


... Canon EOS 40D Digital Camera

Back focus My D300 looked like it was focusing behind the subject. I set up 8 objects on the lawn, each one 3 feet behind the other. I mounted my camera on a tripod, selected a shallow depth of field, and shot each object. I found that at close range, my camera focused fine. The farther away the object, the more the camera focused behind the object. I returned the camera to Nikon for repair under warrantee. They made some adjustments. The focus has definitely improved, but I don't think it is qu


That's not likely to be the camera but the lens. You can actually set a focussing pre-set for each lens you use on the D300. See your manual for more info. ... Nikon D300 Digital Camera

My cibershot DSC-F717 does not have anything in the viewfinder and the LCD displays the settings and options.The screen is black with yellow words and numbers Also my zoom will not work. The LDC does not have an image on the viewfinder nor the LCD. I do have the LCD setting options displayed. The zoom will not show where the setting is on the LCD and I have checked all the settings (the focus on the zoom mode, conversion in the set up turned to off).


HelloThank you for using FixYa for your problemYour camera is faulty. It should be taken to an authorized repair centre for a repair estimate. Very few digital cameras ... Sony Cyber-Shot DSC-F717 Digital Camera

Blurry Pictures I have had this camera less than a year. I took it to the beach 2 weeks ago and the camera was fine. Crystal clear pictures. Then, on the last day of vacation, the pictures started coming out blurry. Even when I am preparing to take a picture the view finder is blurry. The camera is on auto focus and it is set to the shoot and click setting (little green camera). It didn't get wet at all. Anyone know if there is a setting that I may have touched or is this an internal problem.


You probably got some condensation on the lens from going in and outside. You should be able to go to a Wolf Camera or similar store and have it cleaned. ... Sony Cyber-shot DSC-W50 Digital Camera

Zooming FE-280 camera - Worked great for about 2 weeks. While on vacation developed a problem - when you turn the camera on the lens goes in and out like it is trying to focus. Once it is through with the lens action when you try to set up for a picture (any mode) and focus on the subject the camera will not focus and then shuts down. Acts like the battery is dead but camera shows fully charged battery. Any ideas?


The exactttt same thing happened to me. I think i still have a warranty on it, and every body has been trying to help me, but it seems the camera is just retarded- and just needs to be replaced ... Olympus FE-280 Digital Camera

Camera worked great since Dec. 2005. When camera was brought back from the beach, since then photos are not in focus. Looking through the viewfinder is not in focus either. I loaned it to my granddaughter. Was assured camera did not get wet. Have blown compressed air in all crevices on the outside to remove possible sand. Camera had stopped with zoom lens out, not retracted. I replaced battery pack. Everything else seems fine with the new battery pack, but the focus.


Hello\012\012There are following possible factors:\012\012\012\012Dust in the lens\012Moisture in the lens\012calibration of lensCheck these by yourself or by qua ... Canon PowerShot SD550 / IXUS 750 Digital Camera

Wont Focus I dropped the camera from my tall dresser about 5 feet and now it wont focus. It makes a clicking noise when I try to zoom in. Also when I zoom in it gets dark around the coners of the screen. Can we fix this or do we need to take it in and get it repaired.


If its making a noise when you try to zoom in and out I would suspect physical damage. The more you mess with it the greater the chances of damaging it beyond economic repair. I would take it to the local authorized canon repair shop. ... Canon PowerShot S1 IS Digital Camera

My Camera is Canon 40D with EFS 17-85mm lense. I am having 2 problems,1.when I zoom the lense at 85 at 'AF' it doesn't get the focus, some times it get focus but picture got blurred.2 after capturing some pictures an error appears 'err 01'the contact between the lense and the camera is faulty. i need some immediate solution


Your flex cable to the Iris is broken. Have a look at my gallery at http://www.pbase.com/barry_2718/efs1785mm I have the same symptoms. At 28 or 35mm it make wor ... Canon EOS 40D Digital Camera

No focus It does not get focused on object. Looks like there is something on lenses inside the camera because when I do wide zoom directed on white paper there are few gray dots visible on the picture. I tried to open it but did not get to the lenses. Is it posible to open it with some instruction from you. Minolta does not support digital cameras anymore and there is not local repair stores. I like it but can not use. Thank you in advance


Get Sony to repair it; they bought the dig.cam. division from Konica-Minolta. ... Konica Minolta DiMAGE X60 Digital Camera

I have a Fuji FinePix S2700 and I want to use my camera to record video but while recording if I try to zoom in or out the picture gets blurry, if I move a muscle my image gets blurry, if the person or thing I am shooting moves it gets blurry. I'm not sure if I need to change a setting on the camera or if that is just the way the video works with the camera..help please?


... Fuji FinePix S7000 Digital Camera

I have an Olympus C-740 Ultra Zoom Digital Camera. I bought a new memory Card. This camera is new to me and this is the first memory card I have purchased. I do not have a manual for the camera. I am having a problem getting the camera to read the card. I insert the card, turn on camera & the window says "no picture". I changed the batteries also. I can get a oval ring which says "Info on the left, picture of cards at the top, "Mode Menu" on right, & bars at the bottom.It appears the "Mode Menu"


Choose YES for the Format option. Allow it to finish. Should work fine then.\015\012Possible defective card if does not work after full format. Do not use any "quick format" option.\015\012First time must be FULL format. ... Digital Cameras

Today my 5 yr old dropped our S1050 Samsung camera about 3 feet onto a wooden bridge and now the camera DOES turn on and WILL let me review the pictures I had taken up until that point. However, when attempting to take a picture the picture is out of focus and when I zoom IN it gets clearer but then the camera beeps 2 times and shuts off and closes up. It will let me snap an out of focus picture though. Is there any hope? This camera was expensiveand we've only had it a year. Thanks


Take it to an authorised samsung agent and they will either reset it or send it off to be repaired. ... Samsung Digital Cameras

When i turn the camera on, the F (aperature) button blinks, not allowing the camera to focus, even in auto mode. when this happens, i can't even customize my setting on A or S priority. I am frustrated because i can't get my camera to take a picture until the camera decides to focus itself!


This is usually because the lens is not compatible with the camera body. It will work fine with 'M', but light metering, autofocus or distance information are not transferred to the camera.Since I believe you have had this combination for ... Nikon D90 Digital Camera with 18-105mm lens

Auto focus no longer works. Every time I turn the camera on, I get the ''Please turn camera off and then on again message''. When I do that, it can focus in the default lens position, but as soon as I move the lens, it is not able to focus. Battery is fully charged. All settings were reset to default. Formatted SD, and upgraded to V1.2 software. Still no help.


Fast of all happy new year \015\012 your problem is only about your cam machanisam which is not adjast at right position you have to open it and rearange rightly.\015\012 for this you have to right tools for it or y ... Panasonic Digital Cameras

Good Morning I went hiking in broad daylight this past weekend and the autofocus would not work. I have a Canon 40D with a TAmron 18-270. I used av, tv, p, m and auto and I could not autofocus the camera. All I could do is to switch to manual focus to get it to work. When the lens was set to AF all you could is hear is it racking back and forth tying to focus. VERY FRUSTRATING.. Any ideas of what it may be or a setting I might have set accidentally. Any help is appreciated. Bob


Did you set a strange auto-focus point? ... Canon EOS 40D Digital Camera

Hi I have recently purchased a fz28 and upgrades from a point and shoot. I am trying to set the camera so I can get pics of the moon but all I get is a white blob (I got a great pic from the point and shoot) I am being told to set the iso and the focus to infinity and the aperture to f16. I have fogotten my manual and I am away on hols so a step by step would be fantastic. also is there a way of keeping the settings stored so I dont have to remember them! Thanks in advance


The problem is that your shutter is staying open longer than necessary because of all the dark sky. Make sure to use a tripod and experiment with shorter shutter exposures. ... Panasonic Lumix DMC-FZ28 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6935 seconds