Having problems with your Digital Cameras ?
I seem unable to shoot any more than 4 frames per sec fz38 burst
\015 I seem unable to shoot any more than 4 frames on burst mode with the fz38 have read all the instructions which say up to 10 frames per sec. can you help.\015
You need a card with a fast write speed to achieve 10 frames per sec.
Repair Help & Product Troubleshooting for Digital Cameras
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I seem unable to shoot any more than 4 frames per sec fz38 burst
You need a card with a fast write speed to achieve 10 frames per sec. ... Digital Cameras
My eos40d on sports mode is not shooting at its proper speed at 6.5 frames per second. it shoots 2 frames per second and the piture cones out orange and not focus I only have this camera four weeks any ideas what wrong thanks
6.5fps is only the manufacturer's indicative maximum. The camera will not always perform at this speed when conditions aren't suitable (too dark, for example). In Sports Mode, the camera decides the correct shutter speed for that scene. If it's not ... Canon EOS 40D Digital Camera
Shutter frame rate drops to about 1 per sec on CH with MB D10 while using any auto focus lens. 14-24,24-70 or 70-200 and an older 20mm auto focus. With no lens or a manual focus, very old 55mm Micro, lens attached frame rate is normal.
Wow, that's weird. Does it do it with the auto-focus switch on the body turned to manual? I shoot a D300 and know pretty much everything about it there is to know and the D700 is basically the same camera with a full frame sensor. The only things I k ... Nikon D700 Digital Camera
My D90 won't shoot the 4 frames per second. Is something turned off that I can't figure out?
Speed must be over 1/250 ... Nikon DSLR D90 Digital Camera
1.)Shutter does not release 2.) How to continously (3 per sec) take Pics?
Thats the shutter speed control, you can see if your problem lies there, to find the setting if you have one, use the maual and check the glossary for shutter,,, but from the problem you are describing i personally believe its a problem with the shu ... Digital Cameras
Shutter speed won't go over 5 frames a sec. on d300
Even if your camera is rated at shooting more than five continuous frames at a time, those are stored in a memory buffer in the camera, when the buffer is full the camera writes the images to your flash memory card. How fast the memory card can accep ... Nikon D300 Body Only Digital Camera
3 frames per second
Hey there timdjones7, the camera will only shoot 3 fps when placed in Continous Shooting Mode. You can set this via the dial controls on top of your camera. Rotate it to the little icon that looks like a man running. Now you are set to go. Have fun! ... Nikon D40x Digital Camera
I have a Panasonic Lumix DMC-FX150 i believe it records in 720p so im looking at 2 different Sandisk cards that are relatively the same price. Sandisk Extreme lll SDHC 16GB SD 16 GB 30mb per sec C6 (NOTE EXTREME 111 class 6) OR..... Sandisk Extreme 16GB SD SDHC 16 GB 30mb per sec C10(JUST SAYS EXTREME WITH CLASS 10) so which do you think is better and two am i even looking at the right cards? FYI my objective in getting a card is optimal video recording.
The higher the class number, the faster the card will record the video with no problems. Go for the Class 10. ... Nikon D40x Digital Camera
I have a Nikon D200 I have been using in high school football stadiums shooting football, using a Nikkor 2.8 180 ED lens. I have noticed while shooting there isan orange horizontal strip that appears during continuous shutter. The first two frames will be correct exposures, but the third through fifth frames have this 1/3 fram strip of orange first on the third exposure and in the middle of the fourth and on the bottom of the fifth. I have no idea what is causing this. I have checked all m
Its the problem of the ccd lens.and the inter nal settings.take it to the repair center to make it proper.as this type of problems are common and r repairable.so it will be repaired.\015\012for any other further queries feel free to ask.\ ... Nikon Digital Cameras
Nikon D200 In a shoot of 100 photos first 30 ok then a run of black frames which only stopped when i changed lenses shot another 30 all ok .Upon checking in properties for the black frames i find the
Sounds like it might be a failure of one of the magnets in the side plate of the mirror box. What is your shot count? ... Nikon D200 Digital Camera with 18-70mm Lens
Error 99 I took pics yesterday-no problems.Today during a shoot I got the error 99 after shooting several pics. At home I removed, even switched to a different battery and the problem continues. It will shoot a few frames and error out and it doesn't seem to matter which setting is used.
'Error\015\012 99' indicates some problem with the AF contacts. This is a common error\015\012 in Canon lenses. It could indicate a very simple problem like dirty \015\012contacts or a much serious one like the breakage of USM cable.As a ... Canon EOS 40D Digital Camera with 17-85mm lens
Burst iv worked with cams at school that had burst mode on them were they would take picks one right after another like 2 a sec. this has burst moad but it dosnt take picks like that.can u help? thank u ed email me the solution firstname.lastname@example.org
Not all cameras of course support this mode.Are you sure the one in question does?Refer to the manual- check out the control dial- if it does it will need setting up,It would not just happen I would imagine ... Sony Cybershot S650 Digital Camera
Coolpix s8000 digital camera: Unable to get red-eye button whn pressing flash mode as per page 31, only 2 options i.e. flash auto and no flash. ISO - unable to change the iso function. Set at manual. Also, unable to change to black and white option. Please help. email@example.com
Dear Friend,\015\012\015\012All the functions are not available on each and every mode. So first ensure that you have selected right function and compatible mode.... but from your question it seems that your cam is not acting as per manual... T ... Nikon Digital Cameras
Just purchased a canon A590. on page 84 of user guide, continuous shooting is described. I'm somewhat familiar with SD cards, but Canon implies that I have to use their MSH type SD card to use the continuous shooting feature. When I look at the drive modes in my camera, I only see 4 possible modes....single pic, 10 sec delay, 2 second delay, and delay continuous. There is an icon for continuous shooting in the book, but it does not appear on my camera. Why?
I don't own an A590 but I've been handling cameras since the Kodak Instamatic days, so I'll try to help you. I checked out the Canon website for the A590. and they don't specifically state the MSH type SD card. The camera can do 1.4 fps or frames p ... Canon Digital Cameras
D90 - unable to shoot photo & remove lens from camera body
You must try to remove the lens\015\012that lens have some electric contacts and if you set the lens in wrong position that contacts give to the camera some error message ... Nikon D90 Digital Camera with 18-105mm lens
Shoot from display only . unable to shoot through the eye viewer
... Konica Minolta DiMAGE Z1 Digital Camera
Burst Mode The 'Burst mode' on my Kodak v803 camera does not work, er I think it don't work. Is it suppose to take 4 frame and automatically choose which is best, or can the user pick which one, or keep them all?
Turn the red eye pre-flash ON.... press the self-timer/burst mode button ... Kodak EasyShare V803 Digital Camera
My cannon a430 is blind!!!! i can't see anything on the lcd screen ....tried to shoot a frame but nothing appears on the screen, only a black frame..but previous pics taken can be reviewed. what seems to be the problem? help.... thanks in advance
This means the lens sensor is spoiled due to over exposure to heat. One has to give it to cannon service centre. ... Canon PowerShot A430 Digital Camera
I am shooting with a 10mm - 22mm lens - however that should not matter. Frequently my camera cannot find a focal point and therefore i cannot active the shutter release. I am forced to switch to either Manual focus or A (Automatic. I generally have the camera set to either AV or P for standard shooting. I have an EOS Reblel (6.4 pxls) that i've used with the same (10 -22) lens and i have never run into this focusing issue. Also, I am framing pretty standard subjects like doorways etc....N
Hi Janet.If the problem is with auto focus, then it is a factory defect due to the smaller flap. Here an article I wrote regarding this problem: the a ... Digital Cameras
Resolution olympus d-560 ...when i set the resolution to sq1:1024x768 (76 frames) press "OK" and turn the camera off it resets back to hq:2048x1536 (20 frames), it keeps doing this even if i shoot some pictures and then turn it off. could it be the memory card ? the batteries are new and everything else works fine, the camera is about 3 years old. Rob L
No, it resets itself because it is an older camera.Most older cameras will, once turned off, return to their original settings. So, if you want it to be 76 frames, you will have to do that each time you turn on your camera. ... Olympus Camedia C-350 Digital Camera
I have a Sony Cybershot P73. I mistakenly used it for some time on the "Multi burst" mode before realising what just what the problem was. The photos. now show on my computer as 16 small frames on the one photo. Is it possible to select just one of these frames to save , and if so how do I do it? Best wishes, David Gaunt
Open my computer first ... Digital Cameras
Frames how do you get the frames per second from single to multi on the nikon d 80
Press the button on the upper right side of the top LCD screen, there are five options, multi shutter, self timer, self timer remote and remote. each shown by their respective symbols. you should be on single shutter mode, so press this ... Nikon D80 Digital Camera with 18-135mm Lens
My continuous shoot stops after only 4 frames. Why? Something must have been changed on my camera, because, it used to take as many frames as I could hold down the button
Did you accidentaly turn on the bracketing feature of the camera? It sound like you did and now it takes only 4 images bracketed (on exposure, white balance or so on). Change the bracketing setting to OFF and it should work fine. ... Digital Cameras
Viewfinder I just got my *ist DS Monday, and this is my first DSLR. I have a general question, which I hope you guys can help me with. The image framing from the viewfinder is significantly different from the finished photo. The finished product always has a wider angle of view from what I am seeing while framing the shot. At the widest setting, there isn't much difference. At full zoom with an attached Nikon 6t, the object I am shooting is large in the view finder, but it appears half sized
Viewfinder magnification has nothing to do with this. \015\012It's a framing accuracy, viewfinder coverage issue. \015\012\015\012\015\012Viewfinder magnification has to do with how large the focusing/framing field appears, optically, to your eye. Pe ... Pentax *ist DS Digital Camera
When shooting indoors with my 300d (base rebel digital),I have been encountering some light metering problems.I use the 430ex as an external flash. While shooting a subject in front of an external light source-(window, etc.), no matter how small of the frame area include the outside light source, the cameras light meter will invaribly expose the entire image based on the outside ambient light, causing the image to be grossly underexposed. Do you have an explanation/solution for this aggrivating
Set the metering mode to Partial Metering. This uses only 9% of the field of view, centered around the middle square in the viewfinder, as the subject area. If you still find it too bright, try changing the exposure compensation a couple of clicks. ... Canon Digital Cameras