Having problems with your Digital Cameras ?

Zoom lens will not go back in.

\015 I hadn't used the camera in a while and when I turned it on the lens came out but the camera didn't stay on. I thought the battery was dead. I charged it but the lens will still not retract and the camera does not come on. It sounds like it is trying to move but nothing happens.\015\012\015\012All help is greatly appriciated.\015\012\015\012Thanks Paula\015

Answers :

Fixing a Lens Error on a Digital Camera
\015\012
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Zoom will not go back when i power off, comes up zoom error My Olympus Stylus 830 does the same thing. Power it off, the zoom lens doesn't retract, and the camera won't fit in it's case. Power it back on, the zoom lens retracts briefly, and then expands again. I figure it's hosed. Any chance for a low cost fix?


Its better take it to the technician because the motor sensor that gives signal for closing the zoom lens are not working ... Olympus Stylus 830 Digital Camera

Lens error The lens on my Sanyo VPC-E760 will not close. I was not dropped, I was using it to take a picture and turned it off, but the lens never retracted. Now when I turn it back on, it is stuck in zoom mode and give an lens error message when I try to zoom back out, then it shuts itself off. Battery is fully charged. Any suggestions?


Hey jennbrady24,\015\012 What is most likely causing the lens error is that something is obstructing the movement of the lens (i.e. sand). I would first try removing the batteries and the memory card and waiting at le ... Digital Cameras

Olympus SP- 550 UZ , Model number Sp -550 UZ, L 08208054 UO 18x optical zoom - 28mm wide, Digital Camera DC 6V As soon as the power button is pressed, the screen lights up the lens comes out with a message "Zoom Error" and the lens immediately goes back into the camera. I can also hear light clicking sound as the lens goes back into the camera. This problem has been going on occasionally and then I could see the object to be photographed. Now for the last few days I am unable to take any pictur


... Olympus SP-550 UZ Digital Camera

Zoom error Today after using my camera for awhile the back screen displayed "zoom error" and a little sound whirled. Then the camera shut off by itself. I turned it on and off a couple of times, but without success. The lens is extended and will not withdraw back into the camera. I have taken out the batteries and re-inserted them. Finally, I gently pushed the lenses back to the body of the camera (as they seemed to be trying to go back to the camera), I am still getting the zoom error reading a


You may be true that sand must be creating this problem, as this happens very often. the sand enters into the lense assembly, creating friction in the movement. if this has happened total dismantelling and cleaning of the lense assembly will solve t ... Olympus Camedia C-350 Digital Camera

Camera problem Hi. I have a Pentax Optio M20 Digital Camera. When I hit the on/off button, the camera turns on, the lens zooms out for a second and then back in, then it shows the "Pentax Optio M" load screen, then it shows "Auto Picture" in the center and a green dot in the bottom left with the words "EV Compensation" next to the dot. While it's showing this last screen, it beeps 3 times right before the lens zooms out again then back in just before the camera turns off. I have changed the batt


I got it!!! on my cam i hold down the menu button at the same time power on, it will showup a " ver 1.00" and lens move a little maybe u have to do it 2 times but second time it should work ... Pentax Optio M20 Digital Camera

Hi I have a Panansonic Lumix - DMC-FS25. My camera has now developed a fault with the lens which won't go back in. When I turn it on the lens zooms all the way out and then back in again and a message appears saying - System Error (Zoom). Any help would be greatly appreciated, Many thanks Graham


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-FZ20 Digital Camera

Canon SD4000 camera, when hitting the power button, the screen remains black screen, the green light blinks twice, lens zooms out, shutter opens. Screen remains black, and I do not seem to have any control at all; pressing the zoom button doesn't move lens, no notable reaction to anything. Hit the power button again, the lens zooms back into it's original position, shutter closes (occasionally does not shut completely), green light blinks twice, screen remains black. Tried turning on w/o SD card


... Canon SD4000 IS IXUS 300 HS Digital Camera

Lens conversion I often use a telephoto lens or another type of lens such as a panoramic. I cannot get my camera to switch back to normal lens usage. I do have the Conversion Lens: OFF in the menu option. In the screen though my camera still shows W========T there is no other. Any suggestions? Usaually there is a line between the W and the T to show zoom conversion. I cannot get that back.


Check the smart zoom precision zoom setting ... Sony Cyber-shot DSC-H2 Digital Camera

Lens error, restart the camera. How to retart. The zoom lens projected is not getting back again When the camera was on, the zoom lens cameout and got struct and not going inside. we get a instruction as ''lens error, re start the camera'' W e dont know how to restart and tried but failed. we need solution. We are unable to use the camera.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Digital Cameras

Zoom Lens My Zoom lens comes up with Zoom Error and the zoom wont go back in, can you help me rectify this problem please. thanks


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. ... Fuji FinePix A303 Digital Camera

Used Vivitar 70-200 zoom on my K200 Pentax. Nothing but aggravation since. Right now the 18-55 lens it came with is on but shutter button is stuck in down position and my flash wont pop up using the manual "up" button. When I look thru lens and push button, flashing "F" is the only thing there. Removed lens and button would move enough to "click" but would not come up. Put lens back on and nothing! Newbie in the extreme and ready to go back to my MX !!


The issue here is the manual mechinsm is in defect, Your going ot hate me but there is not much I can do over email but to tell you a local camera shop can take care fo this for cheap. Whats going on is the mechism is jammed most of these are spring ... Pentax K200D Digital Camera with 18-55mm lens

On my Fuji s2000hd I have a zoom error, the screen is black and I can't take pictures. The lens will not zoom out. I believe that my husband put the lens cap back on before the lens had gone all the way in when he turned it off but I am not positive that is the problem. The lens seem centered and there doesn't appear to be anything blocking it from coming out. Is there a way to fix this?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a p ... Fuji FinePix S2000hd Digital Camera

I was shooting pictures with my camera at a concert. I used the zoom feture to zoom in, and it caused a zoom error in the camera. I turned the camera off to reboot it, but the lens stayed out. When I tried to turn the camera back on, the camera came on, but the screen went black. I tried taking the battery out, and put it back in some time later (maybe 30 min.-1 hr.). This did not fix the problem, and I don't know what else to do. How do I fix this?


Hi it sounds like the lense has got knocked whilst the camera was one and the lense out, the damage may all ready be done but what you can try is when you switch it on get the lense and try pulling it out slightly and then when the camera is switched ... Digital Cameras

LENS PROBLEM Lens keeps zooming in and out when I turn it on. After 4 times, the lens goes back in and it says on the screen, "Turn the power off and on again". Then it does the same thing when I turn it off and back on. Also, the shutter is not closing however it's also not all the way open. Almost half way but more open than closed. Please help!!!


The slightly open shutter is the reason for this problem. Thank God you mentioned it. \015\012Solution: Try with your fingers to shift the shutter “blades” back and forth to see if they move freely. If they do no move freely it maen ... Sony Cybershot DSCW80 7.2MP Digital Camera with 3x Optical Zoom and Super Steady Shot

My camera lens will not extend when the cover is pulled back. The battery is fully charged and but when I pull the lens cover back the lens should zoom out automatically but it does not. I can't afford to take it into the store to have them fix it so is there anything I can do to fix the problem at home? Thanks


HiYou are probably suffering from the most common fault with the MJU 300/400 range of cameras. If you can still see pictures from your memory card when you use the quick view button, then this is a good indication that the software of the came ... Olympus MJU 400 Digital Camera

LENS ERROR my Nixon camera was working fine one moment, I was taking pictures and then after I turned it off, I went to turn it back on and it starting zooming and making the urghtt noice as it focused in and out. it does that several times and then the lens error notice shows up on the screen. then i press power and it turns off, but when i turn it back on, the same thing happpens. In the LCD display at the back the image we try to take looks like a pic in a TV with bad signal, I tried to clean


This seems to be a problem with switch and the sensor inside the camera, Some time it works on magicaly like nothing has happend, After having this problem I have to on & off the lens for 3 or 4 times and clean the lens and 3 small holes in the f ... Nikon COOLPIX S200 Digital Camera

Basically the actual zoom lens is stuck out and wont go back into the camera, i have tried turning it off and on, but however still says "zoom error" and flashes red. i recently dropped in on the carpet and i think thats why the zoom lens is stuck out. please help


The lens maybe displace. Better go to a service center or an expert. ... Digital Cameras

Zoom my camera isnt an olympus FE - 230 digital camera, its a kodak M836, i can look at my pictures okay, but i cant take any, as when i turn it on to take a picture the lens goes out, and then back it and it switches off. it is nothing to do with the battery as i have charged it several times. - my dad thinks that it goes back in because there is some sand inside (as we recently went on a beach holiday) and that the sand is stopping the zoom from coming out all the way, so it goes back in, alth


TIPS:1.)NEVER PUSH THE LENS IN AFTER CAMERA DIES, BUY A NEW BATTERY IMMEDIATLY AND TURN IT BACK ON, CLOSING THE LENS!2.)NEVER USE AN AC ADAPTER, USE A RECHARGEABLE BATTERY OR A REGULAR BATTERY!..to fix this... ... Olympus FE-230 Digital Camera

About seven days ago bought shelf display Fujifilm S1000. Worked fine at the store. Got home, read instructions, powered up, lens would not extend, "zoom error" displayed. Camera was room temp. When switched on, camera beeps, extend motor clicks, sounds like a gear engages for a split second. Took back to store next evening, it worked fine. Next try at home, same problem. Back to store, worked fine. Tried at home and at work, still "zoom error". Again to store, worked fine. Ready to return, stil


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a p ... Fuji FinePix S1000FD Digital Camera

Camera lens are sticking out and won't go back in. When I turn it on it is zoomed in, while I have not yet had the chance to zoom on my own. It make a funny noise, i tried messing with the lens to see if that was the case, but it wasn't. I need help please


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak EasyShare M1093 IS Digital Camera

Upon trying to turn camera Panasonic DMC-ZS3 on, error message appears: system error (zoom). The lens comes out a bit and then goes back in, shutter closes, then lens comes out a bit again, then goes back in again ... then error message. Can you help? Thanks!


I don't know that I can help you fix it, but I can try.\012Here are my thoughts...\012Check the battery first. If it's like a normal battery, like AA or AAA batteries, replace them and try turning it on.\012\012If it's a flat lithium battery t ... Panasonic Lumix DMC-ZS3 Digital Camera

This Sucks! My camera is new, I went to use it...actually for something I saw that was hillariious...and I turned it on, the lens came out...it was zoomed all the way, and I could'nt take the pic nor could I adjust the zoom. Then I got this hateful message to turn camera off then on again, which I did. Now the lens does not return apon turning the power off, but does retract and come back out when I turn it on...and then the same scenario! Help Please!!!!!!!


I think this is just a hardware malfunction(some mech. switch) because, i have a lz7 and when i deliberately open the battery case with the camera power on it obviously switches off and then when u close the battery case either with the power on or o ... Panasonic Lumix DMC-LZ7 Digital Camera

Zoomlens stuck hi - i have a sony cyber shot w50, the zoom wont return back in, and the screen says - Access, then turn the power on and off again, - the zoom lens is not returning in, i think its been dropped and its squint now, can i take the lens off and fix it?


Examine the lens carefully. you will see that the outer lens is out of line with the inner lens. . hold the camera firmly with one hand using the fingers of the second hand firmly nudge the outer lens back in line. reinsert battery and test.\01 ... Sony Cyber-shot DSC-W50 Digital Camera

My kodac Z1285 stopped working and the whole lens is out, after i clicked the power it started ok then i zoomed in, after the lens is completely out ''maximum zoom'' it stoped working and never come back on. the batteries is fully charged, although i tried another fully charged batteries i was thinking just to go to the screws and open it to see what is happened but i don't know, what shall i do?!


Don't open it!! That will void any warrenty the camera has! Have you tried cleaning it with Denatured Alcohol? You can puchase it at any store with a hardware dept. Just soak a q-tip in the alcohol and swab the camera down. It's safe to use on the sc ... Kodak EASYSHARE Z1285 Digital Camera

My Olympus SP-550UZ 18x optical zoom has a problem. I turn it on, and the lens starts coming out, but it get stuck, and the sounds is this clicking noise. Then on the screen it says ZOOM ERROR and red text. After the lens goes back in and the camera shuts off. I've had this problem for a while and I searched everywhere to fix it. Help!


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Olympus SP-550 UZ Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1709 seconds