Having problems with your Digital Cameras ?

When I turn the power on the camera tries come on but goes off and back on over and over but never really comes on completly

Answers :

Fixing a Lens Error on a Digital Camera
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When I turn the power on the camera tries come on but goes off and back on over and over but never really comes on completly

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Digital Cameras

Vivicam3705 new batteries several times. camera comes on when power is pressed when batteries are 1st put in. then goes to setup time/date screen, complete that and vivitar shutdown screen comes up and camera shuts down and can not get it back on. please help me

BUY A CASE OF BATTERIES, YOU WILL NEED THEM\015\012 ... Vivitar ViviCam 3705 Digital Camera

EX-S500: * I turn it on and the 'Adjust' screen comes up. *I press the 'Menu' and the lens comes out, the green light flashes for awhile, it beeps a few times, it grinds a few times and shuts off. The lens stays out. *I turn it back on, the lens goes back in and the 'Adjust' screen comes on. * I press the power button and the camera goes off. *I left the camera in the charge gradle all night and the battery did not charge. *Help

You could have a power and lens issue, going on at the same time here. There's a couple of web blogs that delineate things you can try to correct these issues, and here they are:\015\012 ... Casio Exilim EX-S500 Digital Camera

I mistakenly dropped my digital camera a few inches when the lens was out.When i tried putting it off to know if the lens would go back in,it didnt move so i forcefully pushed it back inside.Now, when i try putting it on ,the green light flashes,then goes off and the lens attempts to come out but its like its stuck or something pulls it back inside.from what i noticed the camera cant come on without the lens coming out.pls i really dnt know what to do

You've likely jammed the zoom motor in the lens. You're correct in thinking that the camera can't work without the lens out. With it being physical damage repairs wouldn't be covered under warranty so you either need to pay to have it repaired (if th ... Digital Cameras

I have a HP camera CW450t camera and cannot turn it on with the power button on top. I know the batteries are good because I can turn on the camera with the review button and review the pictures that I have taken. When the power button is pressed the green light on the back of the camera flashes but the lens does not come out and the led screen does not come on. when you take your finger off of the on/off button the green light goes off as well.

Had the EXACT same problem with the CW450 model. I called support because I was mad and wanted it replaced. The support tech helped me through the issue. The answer is- NiMH. Alkaline batteries are unstable and not powerful enough for use with this c ... HP Digital Cameras

Olympus SP- 550 UZ , Model number Sp -550 UZ, L 08208054 UO 18x optical zoom - 28mm wide, Digital Camera DC 6V As soon as the power button is pressed, the screen lights up the lens comes out with a message "Zoom Error" and the lens immediately goes back into the camera. I can also hear light clicking sound as the lens goes back into the camera. This problem has been going on occasionally and then I could see the object to be photographed. Now for the last few days I am unable to take any pictur

... Olympus SP-550 UZ Digital Camera

I have a Kodak Easyshare P880 camera where the power intermittently cuts out and then comes back on after a second. When the power cuts out, it is accompanied by an audible click, the screen goes black, and the power light blinks off, then comes back. This happens every 30 seconds or so. Is there a fix for this? What is the cause of this problem?

... Kodak EasyShare P880 Digital Camera

When I push the power button, the lens cap comes out and on the screen is a very brief shot of what the camera is aimed at. The camera stays engaged for one second and the lens cap goes retreats back into the camera and the power goes off and nothing is on the screen. This happens after the battery has been fully charged also.

Try to remove the rechargeable battery and use a battery of the same \012type but an alkaline like the energizer. Sometime rechargeable battery \012malfunctions that it seems fully charged but actually is not. If the \012camera continue to power on w ... Kodak EasyShare M1093 IS Digital Camera

I am able to transfer images to my computer, but when I try to turn the M893 camera on when it's not connected to my laptop, the screen comes on for a second or two, lens comes out, green light is on and then blinks and turns red and blinks and then lens goes back in and camera turns off. I've tried removing the battery, wiping it off, putting it back in, camera also wont charge. It's never gotten wet or been exposed to extreme heat

It has problem on the lens. Lens doesn't extend when transferring pictures that's why it works. Kodak cameras are designed to automatically shut-off when the lens is struggling to go in or out.Follow step-by-step solution and repair on ww ... Kodak Easyshare M893 Digital Camera

Hi welcomejee, I read all your solutions regarding the digital camera Sony DSC N2. I really have to thank you for your precious Some of the problems are very similar to mine: After the camera fell on the ground from about 2 meters in off mode the lens would come out and immediately back in 4 times in a row. After that the lens is back in, a beeping sound comes up and on the display it is written to "Turn the power off and on again". Of course that does not help at all. The lens is opening

George, this is most likely a lens issue, and more precisely, probably a stripped gear when it fell. You will have to disassemble the entire unit to get at the lens assembly, and will probably be a professional by the time you get through! ... Digital Cameras

My camera was working fine and then it gently rolled on to the rug and then it never worked right since. I got the code in the corner of the display E18 and I cannot do a darn thing with the camera now. Should I just chuck it ? ??? Its a cannon power shot A400. (When I turn it on the display light comes on and it beeps numberous times and then the E18 signal comes on and then it goes away and the camera turns off. I do not even think the shutter opens up ) The batteries are charged so what now.

... Canon PowerShot A400 Digital Camera

Lense problem When i turn the camera on in picture taking mode the lense does not come out all the way and if i push it again it still does not come out and then when i push the power button a third time it closes the little bit it opened... but not all the way. However if the camera is in play mode and i turn it on, the lense comes out all the way just fine... then goes back in on its own and i can view the pictures. Because of this it appears the mechanism is working fine but there is maybe

Dear jmgrev,\015\012\015\012Whenever you turn your camera on and your lens doesn't go in and out properly you are likely experiencing a lens error of some sort. Look for an error 18 or a "lens error restart camera" message. If either of t ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

I am new to the video world and just purchased a Canon HF S200 from a guy here locally it is used but looked to be in great condition and working properly. But less than 15 minutes after the purchase and only transporting the camera in my car, when I powered the camera on everthing seemed to work properly except the rotating LCD screen would not come on unless you turn it 180 degrees counter clockwise it comes on and works properly. If you start to turn it back it goes off again. When I turn the

Have you got the user manual? If not, you can download it from www.iusermanual.com.I am not familiar with you videocam but the mannual shows all of the buttons and functio ... Digital Cameras

Camera FX35 was working fine. In middle of taking pix in Oxford, screen suddenly refused to come back on, although optical viewfinder works and on screen viewing of taken shots works OK. Is there a power-saving feature I accidently turned on? Only have the simplified manual with me and am new to the camera. Tried my spare battery but same results. I can continue to take shots via the viewfinder and shots seem to work, but I really want the screen back -

The [AUTO LCD OFF] of the [ECONOMY] mode is active> Press the shutter button halfway to cancel these modes.Charge the battery or replace it with a battery which has enough capacity. ... Panasonic Lumix DMC-FZ7 Digital Camera

Camera lense/power Camera lense is stuck out. When I turn it on the lense goes in and then comes out, a main picture apears, green light comes on and then it powers off with the lense stuck out. It will only stay on if I have it in play back mode. Please help! Phil D. PS - I have the PowerShot SD400

The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try if the camera's no longer under warranty:\015\012\015\012 ... Canon PowerShot A510 Digital Camera

When I turn on the camera, It comes on for a couple of seconds then a gray thing pops up that says turn your camera off and back on. It just does that over and over and never really comes on for good.

Hello Sir,\015\012\015\012This is the very common problem that usually occurs in some models of Lumix. Here are some tips and tricks that works sometime else you need to contact the authorized dealer for a warranty claim (if applicable).\015\01 ... Panasonic Lumix DMC-TZ3 Digital Camera

Canon 1000D Hello there, I'm in China at the Beijing games. my 1000D is giving me a error message 99. can't take picture. I have turn it off and on, take the battery out but the problem still come back after 4 or 5 snaps. please help. I have change lenses and clear the head but not winning. Thanx well i have the similar problem, that i could identify that the camera goes off state after 30 mins, then i found that the display power cannot come, but the camera is working with view finder, if i

Yep set the auto turn off higher and instead of removing the battery, just open and close the battery compartment.This appears to be a problem I have raised with Canon, hopefully they will release a firmware update soon to fix this ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

I removed battery pack from the camera. About two months later, I put it back, and when I turned on the camera, the LCD was completely blurred, with purple vertical streaks throughout the picture. I never had a problem when I've removed the battery. Old pictures appear fine, but now when I take a picture, it comes out almost completely distorted.

There is a pretty good link about this if it is in the pitures related to Soney and Canon cameras that Member t00nz provided in a related post.\015\012\015\012Basically it states that it is a known issue and the manufacturer is aware of t ... Sony Cyber-Shot DSC-T33 Digital Camera

I haven't used this camera for over a year. I have it hooked up to the charger and into a wall outlet for several hours. All 3 blue lights on top are on. When I push on the kodak screen comes on then immediately goes to a black screen. The zoom moves a little but never goes back even with the camera. Thanks, Paula

Not using a rechargeable battery for over a year can cause it to completely discharge and die. That might be your problem. ... Kodak EasyShare V1003 Digital Camera

Olympus fe-230 i go to power the camera on, it tries to open, no outward signs of anything being off track, but it won't open. not only will it not open, but without that happening, you can not even view previous pictures or access any other features. come on now!!! this camera has never been dropped, but there is some wear and tear from being placed in my pocket (as they don't supply a case) but that shoud be anticipated, not cause for COMPLETE CAMERA FAILURE!

The moror mechanisn is very fine - it takes little to damage it- a simple bump, other bits 'n pieces in the pocket.\015\012Check out Olympus - but I reckon - new camera. ... Olympus FE-230 Digital Camera

When i turn on my camera the lens trys to come out but then it gets stuck and goes back in; the screen says "turn the power off and on again" but when i do the same thing keeps happening over and over. The camera has one big rechargable battery so i can't just replace it. I've tried doing the reset, and I've tried tapping around the lens ad hitting the sides or bottom of the camera but nothing has worked.

Here is a very reasonably priced quote for repair; https://www.teleplancamerarepair.com/quote/cart.asp?iProbID=5&mo=358\0 ... Sony Cyber-Shot DSC-S40 Digital Camera

Help! My camera is doing the same thing other's do too. I turn it on and it says "Turn power off and on again" and the lens comes out and goes back in halfway. sometimes I hold down the play button for about 5 secodns and then press it again and it allows me to take (bad) pictures. When i say bad pictures I mean the screen starts shaking and gets static or something and then when i finally can take a picture they exposure comes out so bright that the picture is just a all white or it comes out t

Hi try turning on and taking hold of the end of the lense and gently pulling and twisting you may hear a click but dont force it. then turn off and on again. then you may want to try\015\012\015\012\015\012Press Menu button to ... Sony Cyber-shot DSC-W55 Digital Camera

I'm charging my batteries but the camera will not stay on. As soon as I power it on the lens comes out and goes rigth back in. Please help i need my camera to work again.

How about try different set of new batteries. It is possible, your lense may have mechanical problem. You would have to open the lense, clean it and put back.\015\012\015\012I hope it helps you ... Kodak EASYSHARE M1063 Digital Camera

My Canon Power Shot A80 Digital camera goes ON but only shows the screen name Canon then the lens goes back into off - some sounds come on and then E18 shows in the lower left of a black screen. Help.

Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot A80 Digital Camera

Have had the camera about a year.... today took a picture with it and screen went black, the camera froze up (zoom lens stayed out didn't close). I have put new batteries in it.... the green light comes on on the back but the lens stays out.... the screen stays black. When I hold down power button to turn it off it quacks like a duck and goes off.... Please help!!!

This\015\012 is such a common fault that I hope you don't mind me pasting my stock \015\012generic answer below. No point in reinventing the wheel!Stuck lenses are probably ... Polaroid i830 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4758 seconds