Having problems with your Digital Cameras ?

Camera not remain on

\015 Have a model md41 purchased this past dec. Camera will not stay on when I push the on button. The lens comes out and then immediatly retracts. the battery shows as fully charged. Any ideas\015

Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kodak v610 camera (easy share) My 10 year son was using our v610 camera and the following error message E45 (please see user manual) appeared on the screen. We were unable to switch the camera off and therefore the shutter remained open. The shutter will only close if I remove and replace the battery and when I turn the camera back on the shutter remains open and the same error message returns. I have checked the manual and it doesn't mention this problem. thank you jane


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Kodak EasyShare V610 Digital Camera

Dear Camera expert, I bought a brand new Nikon dslr D80 a few weeks ago. From day one I tried to know the Camera, I found problem when I go to cameras "custom setting menu" at rear screen. It displays No memory card? Lock. Whereas there is always a memory card. No. of shots are erratic: Some times there is one shot and no shot further and No memory card display remains on rear screen. Sometimes I am able to take more shots but problen of No memory card display remains Regards, Ja


Hi,I know this is really irritating display and this is a common problem with canon and nikon camera's.Turning off this little annoying feature can be easy or challenging, depending on which camera system you are using.For ... Nikon D80 Body Only Digital Camera

I am jagadsh here, i got a Nikon Coolpix S210 Digital Camera from my frend from uk,he purchesed in may and given me as gift,but last month it switched off during snaping and the lence remain out side.now it is not charging nor switching on,its remain switched of...i tried several time to charge it but not responding.charger and batary is ok..what happend n how can i switch on this camera,,,?


Http://www.nikonusa.com/Find-Your-Nikon/Product-Archive/Digital-Camera/26103/COOLPIX-S210.html\015\012 ... Nikon Coolpix S210 Digital Camera

Turned my fuji finepix camera on today and the screen remains white and I get no image of the scene in view. The batteries are fine and all the remaining functions such as menu items all work fine. The camera sounds exactly normal when it starts up but there is simply no image on either version of the viewfinder. Have replaced batteries and taken memory card out and in again.any help available please. Thanks


The iris may have stuck closed due to moisture or the CCD may be bad. Let it dry out for about a day if the iris is stuck. If you still can't get an image, then more likely the CCD is bad - take it in for repair. ... Fuji FinePix S5500 Digital Camera

Sony dsc t-70 no display on screen when camera is turned on screen remains blank, camera still makes noise when taking photos, when you touch the screen it makes noises like its working but the screen remains black


Possible failure of the display unit , the fault seems serious and there is no solution from the outside. It needs attention inside the camerawhich will need experience. I would suggest that the camera is delicate and must be looked into at the sony ... Sony DSC-T70 Digital Camera

Lense error Yesterday i took some pictures from my EX-Z75 casio exilim camera. After sometimes it stopped working. When i turn it on it turn off it self just after few seconds and lense just keep remain outside. And when i press trun on/off bunnen twice then the lense goes in side. It can not remain on. Y;day it shoed me lense error on my screen. What shout I do? Its not even compelete a year i bought this camera.


Send it in for repair. their is no easy fix for this sorry. www.digitalcamrepair.com can help. ... Casio Exilim EX-Z750 Digital Camera

Sony Digital Still Camera DSC-P100/P120 I ran my camera till battery ran dry. Camera lense remained protruded. After recharging, the acess flash came on asking me to awitch off power and restart my camera. This I did but lense will not retract when closing down. The camera charges up ok and I have tried removing battery to solve problem to no avail. Any suggestions. I am considering taking a screwdriver to it to remove back of camera. Please help. Kindes regards John Burleigh, Scotland


HI there,There is definitely some risk here, so take care when conducting the following fixes.\015\012\015\012Repeatedly tap the padded/rubber usb cover on a hard surface with th ... Digital Cameras

Kodak DX6490 Hi, I have a Kodak DX6490. The camera hasn?t been used for a while and upon charging the battery and switching the camera on to "auto", the green camera symbol starts flashing but both the screen and viewfinder remained blank. The camera gives a soft click, but the lens doesn't move and the camera doesn't respond to any of the buttons. After a couple of seconds, the screen starts to glow very faintly. This glow is very obvious in a darkened room, but invisible in daylight. There


A repair will cost a lot- Go for a new camera ... Kodak EasyShare DX6490 Digital Camera

When I power up the camera the lens opens and immediately retracts and the camera shuts off. I've attempted to push every button while turning on the camera to no avail. I also held onto the lens when it opened. Though the lens remained extended, the camera powered off. When I turned it back on the lens retracted and the camera powered off.


Have you made sure that the batteries are LiIon and fully charged? I had a similar problem with a Kodak Easyshare camera that required the higher voltage LiIon battery pack rather than alkaline AAs which will fit in there but is not exactly right. ... Kodak EASYSHARE M763 Digital Camera

I have a sony cyper-shot digital camera and have been experiencing a blurred screen as soon as the camera has been switched on and this has remained blurred whilst taking photographs. There is also a code that keeps appearing on the screen at random times. The camera has not been dropped or near any liquids of any kind. If you can offer any solutions as to why the camera may be doing this that would be greatly appreciated. Regards Tammy Mitchell


Focal lens is out alignment inside lens module, requires manually resetting. If you are in the U.K i can help you out with an inexpensive repair . p.m me at [email protected] ... Sony Cyber-shot DSC-W55 Digital Camera

When the camera is turned on with the power button the lens comes out and stays out but the camera immediately shuts off and the lens stays open. The only time the camera remains on is when the dial at the top is in the position to view the pictures already on the camera.


Please try Power Resetting the Camera. To Power Reset the Camera, First, please turn OFF the Camera.Then, remove the battery pack from the Camera.Then, press and hold the POWER button on the Camera for 30 seconds.Then, reinser ... Sony Digital Cameras

Camera malfunction Hi, bought myself a FE 330 Olympus Camera last summer. Now when I press the power button, the lens protract and retract thrice then the camera beeps thrice. The screen remains blank during this process. Thought it was the battery and recharged it. No luck. HELP!!!! P.S. - Cant seem to find my brand in the selection below so I just chose 230. But my camera is the FE 330 product


I had a Nikon Coolpix L1 with a very similar fault- the lens would whirr in and out as if seeking then lock either in or out with a 'lens error' message.\015\012Not sure you're going to like the solution: place a paperback book on a strong tabl ... Olympus FE-230 Digital Camera

I am trying to to charge panasonic lumix dmc-zs5 camera battery with it. As soon as I plugged it in showed a red light (power) on the charger. Even after inserted the camera battery the the red light on the power remained but there was no light or indicator for charging. After an hour when I used it in my camera it still was not charged. I could not find any user manual on the net so don't really know how to charge my camera battery.


User manuals can be downloaded from the support section of the Panasonic website. ... Digital Cameras

My camera will not switch on.The screen remains blank and the lens cover does not open.I have confirmed it is not the battery because I tried my battery in my friends camera and his camera works fine. I have just returned from a trip to Thailand where it was very humid.I am thinking that maybe there is moisture in the camera.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

I have an Akai digital camera model DC6371. On start up the lens pops out and screen lights up, but then the screen closes down and (often) the lens remains out even when the camera has been turned off. On trying to operate it again today, the green light indicates the camera is on for a few seconds and the screen lights up momentarily, but the lens doesn't pop out and the camera closes down again.


Looks like you have the notorious lens stuck problem. Since you said it pops out occasionally but does not go in, it is probably a faulty motor or some kind of mechanical obstruction. A qualified camera should be able to fix this for you but I recomm ... Akai DC6371 Digital Camera

No power I purchased a Canon 400D about a year ago and shortly afterwards the camera suddenly gave up on me. I took a couple of photos and then nothing. The battery was fully charged and the power light came on when the camera was switched on and remained on even when the camera was switched off. I was going to take the camera in to a service centre a few weeks later for repairs but when I switched the cameraon again, the problem seemed to have disappeared. Since then I have been taking photos w


This definitely looks like an issue with the Camera. I suggest contacting the Camera Tech Support immediately and request them to send the Camera to the service center. There are more Canon Rebel XTi owners, including me have experienced no-power iss ... Canon EOS 400D / Rebel XTi Digital Camera

WHEN I TURN ON MY COOL PIX S51 A LENS ERROR MESSAGE COMES ON THE SCREEN AND DOESNT ALLOW AN OTHER FUNCTION WITH THE CAMERA. THE LENS COVER IS STUCK OPEN WHEN THE MASSAGE IS DISPLAYED. IF I TURN THE CAMERA ON AND OFF A FEW TIMES THE COVER WILL CLOSE BUT THE ERROR MASSAGE REMAINS. IM NOT SURE WHY THIS HAPPENS AND IVE NEVER DROPPED MY CAMERA AND ITS ALWAYS STORED IN A FOAM CASE. I CANT AFFORD ANOTHER CAMERA RIGHT NOW, IS THERE ANY SOLUTION TO MY PROBLEM?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Nikon COOLPIX S51 Digital Camera

I dropped my camera on the beach right as a shallow wave was coming in. In my fumbling to recover the camera I turned it on. The lens extended and remained that way. I took the plastic camera cover off, rinsed all parts (with purified water) that I could. I air and low heat blew dry the camera over several day, and re-assembled it. When I insert batteries I get a power light, but get no lcd screen, no sound of pictures taken on full compression of picture button, no further extension or ret


Sorry, I'm afraid that I also think it's a lost cause. Usually repairing a water-damaged camera is more expensive than buying a new one. ... Canon PowerShot A1100 IS Digital Camera

Unuseable Camera Hello, this is a sudden emergency. A sibling borrowed my camera and it came back un-usable. She said the battery went out, but I think she just said that not to get in trouble. What is happening is this: Firstly, the camera is off and the lens remains un-retracted. When turned on the screen is black and nothing happens untill I press the tiny button below the speaker, the icon is a paper with a symbol close to( <~> ) that to the right, the screen illuminates to black with


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try if the camera's no longer under warranty:\015\012\015\012 ... Canon PowerShot A80 Digital Camera

My Samsung S1060 digital camera is malfunctioning when i turn it on. The green light turns on for a few seconds and the screen remains blank, this is then followed by three odd-sounding beeps and then the camera turns off. It seems as though the shutters on the camera cannot open. I have tried replacing the batteries and connecting it to the computer and it made no difference, please help.


Hello. I want you to turn on the camera and find the reset function in the menu. Push reset and and reset your camera to factory settings, like the day you got it. IF that doesn't solve the problem you may have dust in the shutter mechanism which ... Digital Cameras

Camera - Fujifilm Finepix A500. The screen goes blank when taking a picture. It does not take the picture and although the screen goes blank and only comes on again when the power button is pushed the lens remains out. It does retract if switching the camera off. There are new batteries in the camera and a different set has also been tried.


What worked for me with the same problem is to reformat your internal memory and/or picture card. First, download all your pictures saved from your camera to your computer, since the reformat will wipe them off the camera memory. Next, follow the ins ... Fuji FinePix A500 Digital Camera

Hi there, My laptop is suddenly unable to detect the camera, canon lxus 90ls, I have reinstalled the software and also tried a different lead but to no avail. The camera does know the lead is in place as the lens remains stationery when switched on, however I only see the last picture taken on the screen, not the pc connect sign. I have tried going through start/programmes/ window (s) etc, but it is saying the camera is not there. I am totally at a loss. Thankyou.


Simplify your life...get a card reader. ... Digital Cameras

Has always worked fine, til just now. took a photo, went to put onto ebay and opened picture using windows picture and fax viewer. not happy with photo,switched off, removed camera from cradle (link to pc) and tried to take another photo, but when i switched the camera on i had an error message stating 'focus error' and when i tried to switch it off the zoom lens remained extended and will not go back into tne camera. I have read the manual and tried removing and replacing the battery, but this


For your information the computer has nothing to do with the focus error!!!!the error appears as a message due to either of these reasons.\015\012\015\012you have dropped down the cam.remember even a small drop may ca ... Fuji FinePix F410 Digital Camera

Olympus D340R I received this camera off of freecycle.com with the person saying she did not know if it worked or not. In the box was a sheet of paper saying it had been sent in for repairs but the problem was not fixed. The camera is taking pictures but the LCD remains black. We found out it is taking pictures by putting the memory card into the computer. Is there some way we can fix this problem ourselves or do you have any suggestions? This is an older camera but wanted it for my son to just


Their counld be several diffrent reason why the lcd is not working. \015\012\015\012back light is out \015\012lcd broke\015\012lcd cable came loose\015\012if ... Casio Exilim EX-S600 Digital Camera

The camera powers on fine, although it has a black screen with no image. What type problem is this and is it fixable or not. When I go to look at the pictures I took while the display screen was blacked out the screen remains with no image. I just turned on my camera the other day and I can still acces my menu, I can see the camera details in the corner and even view old pictures but when I turn it on eveything else is black! I can't take any new pictures because of the black screan. Is this fi


I have the same problem i need help fixing it? ... Nikon Coolpix S3 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2510 seconds