Having problems with your Digital Cameras ?

Lens is stuck in ou position. Cammera powers on and lcd screen lights up for like 2 seconds then goes off. :-(


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lens is stuck in ou position. Cammera powers on and lcd screen lights up for like 2 seconds then goes off. :-(


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Digital Cameras

Kodak Z700 Camer appears to be in a locked out mode. The lens is stuck partway out and does not retract if the camera is turned off. When turned back on The Green light comes on for approximately 5 seconds and then goes off. The viewing screen comes on for 2 to 3 seconds and goes out as well.


Hi,Tentative solution:I had the identical problem. I went as far as disassembling the camera ... not recommended.Instead of fussing with the lens cover, I pressed on the lens assembly (gently), the lens retracted and the ... Kodak EasyShare Z700 Digital Camera

Okay, so i have a sony cybershot DSC-P41 and i press the power button, the light turns green for like, 2-3 seconds then turns off. the screen is blank. the light is the only thing that goes. it was working perfectly a few seconds ago then, BAM! it got messed up! please help! -Kyra


Hello KyraThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to ge ... Sony Cyber-Shot DSC-P41 Digital Camera

I have a Minolta Dimage 7Hi and get a 'card error' message when I turn it on, in the middle of the viewing screen. The camera acts like it takes a picture without the button being pressed, then the red light next to the card goes on and off for about 10 seconds. Then the camera shuts down. It repeats this when I turn the camera back on and doesn't respond to any other settings or button pressings. Can you help?


Format CF memory card to FAT16 - 7hi does not recognize FAT32 nor NTFS ... Konica Minolta DiMAGE 7Hi Digital Camera

When I turn my camera on, it makes noise like it's turning on, the lens goes out, and the screen lights up... in less than 10 seconds it turns off again...It is NOT my battery. HELP!


I've seen this problem many times at my work. Unfortunately there's no one cure all for it. You could take it in for repairs, however, if you don't have any warranty or insurance protection it's usually cheaper to buy a new one. ... Kodak EasyShare M1033 Digital Camera

I have a Kodak EasyShare C143 serial number KCGMU03223587 and this is my second one since August of this year. I had the same problem with both. The first one I was able to exchange, but the second one I can't since I haven't been able to find my receipt for it. The problem is I go to turn on the camera and the lens goes out so far and that is it. No screen or anything. If the screen does happen to come on it is on for like 2 seconds and it goes off. I take the batteries out and exchange them wi


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak Digital Cameras

Kodak easyshare M893 IS will not stay on. The battery has been charged and replaced, however, when the camera is turned on the green light comes on, the "Kodak EasyShare" screen appears for a second or two...then the green light flashes, the red light comes on and the screen goes blank.


Make sure that you are installing a fresh/ full charge battery\015\012Here are the steps:\015\0121. Make sure you will install a new or fully charged battery/batteries into your camera.\015\0122. Clean the battery contacts.\01 ... Kodak EasyShare M853 Digital Camera

Blankness When I switch it on, my screen goes grey-white for a few seconds. Then, It shows my last picture taken but it's very fuzzy and faded. Then the picture changes into complete greyness. THEN, it'll jump from the grey-whitness, to that faded picture. Damn. Would there be any why I could just replace a part in it? Like the hard drive or something? Definitely sounds like something is really fucked in my cam. Sniff. I loved it and hate having to buy another new one as I'm accustomed to using


This sounds like it might be a defective CCD imager. If so, Sony should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following link for more info:\015\012 ... Sony Cyber-Shot DSC-T1 Digital Camera

Press power button, lense doesn't expand out but view screen comes on blurry for about 3 seconds then camera beeps 3 times and screen goes blank, blue power light stays on and camera is locked up, won't do anything without taking battery out and trying again. Anyone have any ideas??? Camera worked 1 hour ago then this just happened. Hasn't been dropped.


Very common problem, you have a bad lens. Unless under warranty the camera may be history. ... Samsung Digimax L730 Digital Camera

Canon ixus 09is Turn camera on - yellow light appears - camera makes noises like its ready to go - screen doesnt work and it takes a few goes to turn it off. Even when the lens eventually retracted and stayed shut the yellow light stays on and the camera got very hot


... Canon IXUS 90IS Digital Camera

When I push the power button on my camera, the blue button turns on and the green light above the T lights up for a second and then goes away. Nothing happens and I can't do anything with the camera. The lens is also stuck out and turning the camera on does not make it go back in.


Take a Q-Tip dampened in rubbing alcohol and clean the contacts inside the battery compartment. Also clean the battery itself and the charger contacts. ... Samsung L200 Digital Camera

Have had the camera about a year.... today took a picture with it and screen went black, the camera froze up (zoom lens stayed out didn't close). I have put new batteries in it.... the green light comes on on the back but the lens stays out.... the screen stays black. When I hold down power button to turn it off it quacks like a duck and goes off.... Please help!!!


This\015\012 is such a common fault that I hope you don't mind me pasting my stock \015\012generic answer below. No point in reinventing the wheel!Stuck lenses are probably ... Polaroid i830 Digital Camera

I have a Kodak Easyshare P880 camera where the power intermittently cuts out and then comes back on after a second. When the power cuts out, it is accompanied by an audible click, the screen goes black, and the power light blinks off, then comes back. This happens every 30 seconds or so. Is there a fix for this? What is the cause of this problem?


... Kodak EasyShare P880 Digital Camera

Lens stuck in closed mode. when turn ON, motor makes noise and light comes on but light goes off after a few seconds when lens does not extend.


Your problem may be due to corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\ ... Olympus FE-340 Digital Camera

Camera will not turn on my nikon coolpix s51 will not turn on fully. the green power light shows on but then it goes off after a few seconds. i have not tampered with the card but i know the battery is fully charged - tried twice recharging it. the lsd screen does not come on at all, nor does the shutter lens open at all. it is not responsive to anything at all, except a green light coming on the 'on' switch but then going off again... any ideas?


... Nikon Coolpix S51c Digital Camera

When i power on the camera makes a few noises (bleeps) and then shuts down green light flashes quickly for 10 seconds screen goes on then goes white


... Casio Exilim Zoom EX-Z700 Digital Camera

I hit the power button and it turns green for a second but then goes out. The camera and LCD screen do nothing. So I have some sort of power problem. When I put the battery in the charger the charger light comes on for about a 10seconds but then goes out (suggesting that the battery is fully charged). Is this a battery problem (not charging or holding a charge) or a camera problem? I don't want to buy a new battery if the camera itself is dead... Thanks!


Hi i have struggled with this within few months of buying the camera.\015\012Both the charger and camera are not making a good connection with the battery. i clean with alcohol, this usually helps with the charger. When powering up in camera i ... Sony Cyber-shot DSC-W120 Digital Camera

Stripes When I take my pictures pale yellow stripes appear across the screen. I changed the batteries, changed the card and nothing helps. My camera is not even a year old. when I take a photo there are light stripes across the image, somtimes if I wipe the screen it goes away but when I shut the camera,the next time I open it it happens agin! how can I fix this,is the lens sticky? or getting stuck? what can I do about it?


\015\012ol' ... Fuji FinePix F460 Digital Camera

Samsung digimax s1000 turned on before, lens came out then shut off.power light blinks when you try to turn it on. but will not turn back on. lights up only when button pressed. tried different batteries. Using N-Mi Rechargeable batteries. Tried with sd card Worked fine the day before. But, it looks like the lens did not come all the way out and the first lens is at an angle to the second. Gears stuck maybe? Don't remember interfering with the lens when it was turned on. If it's the gears being


Follow this link and i would try step 8 and/or step 9http://www.wikihow.com/Repair-Lens-Problems-on-Your-Digital-CameraI am a ... Samsung Digimax S1000 Digital Camera

My Canon Powershot SD1000 acts like it shuts off when I try to upload pics to my computer. When I plug the usb into the computer and the camera into the usb the Camera will still work perfectly fine in picture and video mode, but when I put it in the mode to view my pictures because once I do that the computer dectects the camera to open the program to transfer the pictures the screen goes blank before my computer can detect it and it looks like it shuts off, but thje green power light is


Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer ... Canon PowerShot SD1000 Digital Camera

Samsung L730 My camera appears to be stuck. The lens usually pops out when it is turned on. However, when I turned it off today, it remained out. I tried removing the memory card and battery. Also, it won't turn off unless I remove the battery. When it is on, the screen is black and the usual green light goes off after initially pressing the power button. Is there a way to reset it?


This camera would have to be tested more, but it sounds like a ccd or sensor problem. If this camera was made around the year 2000 or after a bit, then it could be a ccd problem common with many Sony made ccds in this period.A loose conne ... Samsung Digimax L730 Digital Camera

Camera wont turn on zoom lens is stuck out camera power light comes on flashes for a few second the screen shows a E18 then it shuts itself down


The lens motor or drive has failed. Thats why you are getting the error and the lens won't retact.This is covered under warrenty if you have any. If not it can cost more than a new camera to get fixed. If you conact canon support or conac ... Canon PowerShot A410 Digital Camera

After I take a picture the screen goes blank while the red light is flashing and I have to wait at least 10 seconds before I can take another picture. I can turn the flash off and be able to take pictures consecutively, how can I fix this or is this the way the camera works?


That's the way the camera works. One of the things you get with a higher-end camera is faster speed. ... Nikon Coolpix 5600 Digital Camera

Battery/Power trouble My C-770 is 2 years old and I still have the original L1-10B batterys that came with it. The camera goes through periods of non-use so has not been used excessively. When I put in a newly charged battery the battery indicator says the battery is full, but then take one picture and the light blinks empty and usually dies with the lens out and the ISO numbers still on the screen. I switch the power button into the off position but it generally takes a min before it actuall


Using a little common sense I'd be checking the batteries first. You're going to need a new one sometime anyway so get a new one and try it out. Just make sure your battery charger is working first. It sure sound like battery problems to me. ... Olympus Camedia C-770 Digital Camera

The lens of the Kodak Easyshare C913 camera was out when I dropped it. It won't go back in now. It is stuck and when I press 'on' the screen alights for a second and goes blank. I can't take any pictures


Im sorry to know about what happen on your camera., base on the statement tahtyou haved it means your camera needs of service., Please call kodak Toll free 1 800 235 6325 For. U.S and canada support. if outside U.S yu can visit kodak.com and click fo ... Kodak EasyShare C913 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3769 seconds