Having problems with your Digital Cameras ?

Need Operating Instructions/Manual for Minolta Auto Spot 1degree Ligt Meter

Answers :

You can get it but it is not free you have to buy it from the link below...

Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need Operating Instructions/Manual for Minolta Auto Spot 1degree Ligt Meter

Hi,You can get it but it is not free you have to buy it from the link below...http://www.oldtimercamer ... Digital Cameras

I have a Minolta SG2 and it is working perfectly but there seem to be a problem with the light meter. The light meter is a bit off and it is only working i Auto Time mode not with Manual Time. Can I fix this problem somehow. Remember otherwise the camera works perfectly and the batteries are new and very good.

... Digital Cameras

I have a Canon Digital Rebel XT camera using a 75-300mm telephoto lens. My problem with the lens is that at times it is hard to adjust the focus either manually or automatically with the camera. I hear something rattling around inside the lens and at times the lens will not auto-focus and I have to remove the lens and manually twist it to get it back to some normal operation. Is this fixable or do I need a new lens?

It sounds like the lens has been dropped or knocked and is misaligned in the guides.Repair against new lewns is a difficult one as prices vary. I would perhaps consider replacing it with a used one. Before you do borrow a similar lens from some ... Canon Digital Cameras

Minolta 700si - Shutter release button stopped working. It does trigger metering, auto-fouc, etc - but doesn't trigger the camera's shutter. However the shutter release button on the Vertical Control Grip (VS-700) works perfectly.

... Digital Cameras

Nikon D80 with a Sigma Lens (80 to 200 I think). In manual mode, often shutter won't release - this was a close up of a hummingbird with a fast shutter speed. Internal light meter showed underexposed, but the background was dark green. Initially, the shutter released, but later would not operate either with a remote, or by manually depressed the shutter release button. Switching back to auto, the camera seemed to work fine, but in this mode could not get the desired shutter speed. In full manual

In full manual, yes it should. ... Digital Cameras

Is the Minolta Maxxum spxi a single lens reflex camera with manual operation of the shutter, aperature and focus? Is there an instruction manual available for this camera? I have an opportunity to purchase this camera second hand but do not know a lot about it. My son needs it for a photagraphy course. It has a AF 30-80 lens.

... Minolta Digital Cameras

Random reset Mine also shuts off at the most inopportune times ... In researching the web i have found several others with the same problem. Unfortunately I have not found any solutions or explanations. When my camera operates properly it takes wonderful pictures on both manual and auto settings. I only wish I could count on it to remain "On" when I really need it ...

I also have a P880 that has started shutting off on its own. Here's the fix that worked for me (well, not really a fix, but a workaround, and at least it points to the possible cause): as soon as the camera turns on, go into the menu and turn t ... Kodak EasyShare P880 Digital Camera

New camera: I need operating manual. I just need the operating instruction manual for X024 please.

Hi,\015\012\015\012You can download the operating manual by clicking this link\015\012\015\012You'll require Adobe PD ... Digital Cameras

NEED to change the lcd display screen for canon ixus 860 is, any idea how much does it cost for and where can i buy it from (india, pune) Initially it had small spots on the screen, now its hs big spots.. need to replace it :(

One possible source is http://uscamera.com/ck9-1294.htm ... Canon IXUS 860 IS Digital Camera

Nikon d40 am having a plobrem with the auto focus and the camera won't take pictures whe on auto settings. if you focus manually and the subject is clear , the camera will operate, but will not operate when the subject is out of focus.

The G series lenses won't work in AF mode on the newer, entry-level Nikons. They require the DX series. ... Nikon D40 Digital Camera with G-II 18-55mm Lens

Operating Manual I need help learning about a Canon camera that was given to me and I need an operation manual and a number to call for help

Went to Canon website and downloaded the appropriate operating manual.... ... Digital Cameras

Hi, I've just recieved my nikon d90 back from a repair and service, and although everything appears to be working fine, whenever I want to change shooting modes,( auto, P, M, flash off etc), they only work once I have selected them, and then turned the camera off and back on. In other words I cannot be shooting in the Auto mode and then switch to "flash off auto"....all that happens is that the auto focus works but the shutter will not operate. If I switch the camera off and on however, I can t

I'm going to assume at this point that the camera has been serviced correctly. What I'd suggest is that you look in your manual and find where you can reset your camera back to the factory default settings. Okay here are a few thoughts that might be ... Nikon D90 Digital Camera with 18-105mm lens

Need a copy of owners operator manual lost mine need a new one.

Below is the link to the manual for your camera. You can download it for future use (pdf) format.http://www.polaroid.com/s ... Polaroid i534 Digital Camera

Need the schematics or user manual for a movinghead LED spot ? Varytec easy move xs spot

... Digital Cameras

Operating instructions I have JDC 11 camera but i don't have the operators manual could someone upload a copy. need operators manual for jdc-11 digital camera- upload, anyone?

Hi,Click HERE to download available online manual and call 1 732 499 7945 for detailed manual.Thanks. ... Jazz JDC11 Digital Camera

The auto setting stopped working - I usually always had it set on Auto, then "Auto" became video (same setting as video setting) for some reason. Now, it won't take pics on certain settings and only lets me take pics on a fast setting, so pics always come out blurry. Sometimes won't let me view or forward through pics. I've charged battery. Do you think I need to replace the battery?

... Canon PowerShot S60 Digital Camera

I've just purchased a Logitech Quickcam communicate STX. Unfortunately it can not be detected by my machine, asking for software/drivers. The Software that came with it tells me that I need Windows Service Pack 2 or better to operate the camera. Is there any way to operate the camera now? Or am I forced to upgrade to service pack 2 before operating this device?

Chances are you are going to have to upgrade your service pack. The drivers probably need parts of the upgrade to function. Sorry but there are some goods points to sp2 or even the new sp3. Better security and stablility in windows plus your quickcam ... Digital Cameras

W1 metering I am fairly new to this camera and I was wondering which settings most of you use. The multipoint AF or the Center AF for focus ? The multi-pattern metering or the spot metering ? Most common ISO rating ? The image size 5M or 3.2M ? Also I found that you can't have the camera set one way for the M mode and another way for the P mode. Sorryto ask so much. Richard

Put your camera in auto mode and look at the menu. You don't have much choice of anything. Essentially, I believe Program is like auto, except you have so many more choices to make. Naturally if you change the ISO, for example, in Program mode, you w ... Sony Cyber-Shot DSC-W1 Digital Camera

Spot metering on the Epson 3000z

The spot meter area is small because I have photographed 2 people side by side many times, focused on ones chest then found that the "spot" had slipped into the little space between them, the bad focus not really showing up when I checked the LCD. (M ... Epson PhotoPC 3000Z Digital Camera


Http://dxgusa.helpserve.com/index.php?_m=downloads&_a=downloadfile&downloaditemid=43 ... DXG Technology DXG-572V Digital Camera

Cracked LCD Does anyone know which camera LCD would be compatible with the Konica Minolta Dimage X50? I need to replace it on a camera and have been told that I need to pay over $100 at Sony, who's now handling the customer service/repairs for Konica.

Minolta and sony as well as other brand uses the same lcd panel. ( its a separate manufacturing company). try junk or surplus parts ... Konica Minolta DiMAGE X50 Digital Camera

Dark photos I am a new Nikon user and have the D80. This is way more camera than I will ever need. I can not take pictures without them being dark not even in the auto mode. This is inside or outside I have two lenses and have switched them and it's still dark. I was able to change the exposer to get them lighter but would think you could take pictures in auto that would be fine.

\015\012Be sure camera is set to the Green auto, not the A (A= aperture priority)\015\012Be sure your white balance is on auto.\015\012Be sure your EV is set to 0\015\ ... Nikon D80 Digital Camera

I need to run this camera on a vista operating system. Is that possible and what do I need to download.

Hello, im Ismail A, and I would love to help you. Ok, Find the drivers at www.nikon.com I had the same issue but it works now. You can also try turning off ReadyBoost in Windows ... VuPoint DC-ST12 Digital Camera

JVC mini-DVR video camera model GR-D750U not operating properly. Upon tape insertion, it shows error code 03 and goes to "safeguard mode" Already attempted to re-insert tape as directed on camera screen and insert new tape, but the problem persists. Would like a description of the reason for the error, likely causes, possible extent of repairs needed, nominal cost for such repairs, and recommendation on whether this could be fixed at a local JVC service center or if it would need to be sent

... Digital Cameras

I have a Canon XH-A1s camcorder that I want to synch with my Sikonic Light Meter (cine mode). I know how to do that in theory, but need to connect the camcorder to Final Cut Pro's color tables to get a decent grey card reading from the camdcorder. So, in effect, I need to stream a signal (via Firewire) from the camcorder into FCP, bypassing the log and capture window. I've tried all sorts of ways, but have given up. Please, someone, tell me what I'm missing. Thanks.

Copy and paste in your address barsupport.apple.com/kb/TA26150?viewlocale=en_UShardware setup and configuration ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1551 seconds