Having problems with your Digital Cameras ?

Camera says turn off and on. keeps doing this


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Just bought camera. Put batteries in and an sd card. Switched on and the camera keeps saying turn off and turn on again. Done this several times but it keeps saying the same


... Fujifilm Finepix S2980

Lens error my camera keeps saying lens error and then shuts off My Kodak M753 digital camera is telling me "lens error: 1,1,5,1,0,0", how can I fix this? - I have no proof of when I bought it, so a refund is out of the question. my camera was covered by luggage and now when i turn it on, it says lens error I dropped my digital camera just recently back in October and all of a sudden when I turn the camera off the lens is still out when it's suppose to be in... I really don't know how that hap


This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Fuji FinePix A345 Digital Camera

My sony digital camera won't fully turn on. when you push power the screen stays black but it says access and the lenses repetitively goes in and out with a 3 second pause between. then finally it stops and says to turn the camera off then back one. but this keeps occuring and it won't fully turn on. HELP!


There is some problem with your sensor in lens so only you are getting this problem .......so better check the sensor..... ... Digital Cameras

I tried to film on my camera but it keeps saying card error. now i can not see any of my pics or videos. it wont let me take pics or films either. when i turn on my camera it keeps saying crad error. before this happend it was saying the memory was full so i deleted some videos but now this has happened.


Buy a card reader and use it to download to your computer. Then, insert the card back in the camera, go into the menu and scroll to "format"...follow the on-screen instructions. ... Digital Cameras

Hi, I own a Sony Cybershot camera, and it has been giving a few problems as of this week. The lens keep re-adjusting in and out when I turn the camera on to take pictures. It however responds just fine when in picture-view mode. There is a screen prompt that says 'Access' when the camera is turned on, as well as the message 'turn off camera and start again'. I do not think that the camera had fallen at any time, and it is just under a year old. Thanks a lot for your response, Sarah.


... Digital Cameras

Camera keeps turning on and saying high camera temp( camera will turn off)


Have you tried replacing your battery? Since it is a few years old, that may be the issue. ... Kodak EasyShare One Digital Camera

Getting access I turn the camera on, then the word access appears on the screen, then it says to turn the camera off and on again. it keeps repeating this each time you turn the camera on. How do I get pass this and be able to use the camera???


Gently hold the lens when you first turn it on to prevent it from going back in the camera. That worked for me. ... Sony Cyber-shot DSC-W30 Digital Camera

Sony-cyber-shot dsc-w50 I blieve that the battery if fully charged however when I turn the camera on all i see is a blank screen saying "access" with the lense zooming in and out then a message comes up on the sceen saying "turn camera on and off" I do this and the same thing keeps happening, could you please help? Sara


Lens unit is faulty, may have had sand or damage at some time, focus assembly inside the lens is not focussing ... Sony Cyber-Shot DSC-S40 Digital Camera

Sony Cybershot camera will no longer take pictures. When turned on the lens keeps opening and closing and the screen says ACCESS. Then it says shut off camera. The battery is fully charged, not sure what the problem is? The camera is 2 1/2 years old, is that the life span of a digital camera?


I had the same problem. I looked at FixYa some months back and found the solution. Give the camera a jolt against something hard. . . has worked for me several times. ... Sony Cyber-shot DSC-W50 Digital Camera

KEEPS SAYING TURN OFF CAMERA AND TURN ON AGAIN


... Fujifilm Finepix S2700 Hd Digital Camera S2700hd 4gb Kit

After inserting the battery back in the camera, the camera become stuck in a loop. The camera turns on but the screen stays black with only the words "access" appearing on it. Then the lens keeps adjusting itself and after a minute it says to turn the power off and on again. So I did that and it does not work.


This is courtesy of an outside expert.\015\012You may not believe this and I hope you haven't spent a lot of money fixing your problem. I ... Sony Cyber-shot DSC-W50 Digital Camera

Hi today i recieved my FujiPix S4000 camera, after putting in the date and time, it then pops up, turn off the camera and turn on again, which i have done several times, along with changing the batteries supplied with it to rechargeable ones like it says it only takes in the manual, i have also tried resetting it, and trying various sim cards other than the one supplied. Butr it keeps popping up everytime i turn it on.


... FUJIFILM FinePix S4000 / S4050 Digital Camera

Hi, I have a panasonic Lumix, DMC-FS5 digital camera. When I turn the camera on and it's on 'photograph' mode, a message keeps appearing after a couple of seconds saying: "please turn camera off and then on again". I get the same message everytime and am unable to take any photos or even access the menu options. There are no problems when the mode is set to 'playback' mode. The images are still there and I can scroll through, as well as access the menu.


Hi,I had this same problem. I have just pulled the lense (not with any major strength) when it was fully extended. This seems to have solved it for me!! ... Panasonic Lumix DMC-FS5 Digital Camera

I just bought the cfujifilm finepix s4000 camera and every time I turn it on it says turn the camera off and turn it back on again... but I keep getting the same message.


HelloThank you for using FIXYA!!!This\012 is a suggestion. If you do not feel comfortable trying it, ... FUJIFILM FinePix S4000 / S4050 Digital Camera

When i turn on my camera the lens trys to come out but then it gets stuck and goes back in; the screen says "turn the power off and on again" but when i do the same thing keeps happening over and over. The camera has one big rechargable battery so i can't just replace it. I've tried doing the reset, and I've tried tapping around the lens ad hitting the sides or bottom of the camera but nothing has worked.


Here is a very reasonably priced quote for repair; https://www.teleplancamerarepair.com/quote/cart.asp?iProbID=5&mo=358\0 ... Sony Cyber-Shot DSC-S40 Digital Camera

When i power on the Camera F72 EXR it comes up with an Error message that says turn camera off and then turn back on, i do that an the same error keeps popping up, also when camera shuts off the lense fails to collaps and stays open in the off position


Whenever I've seen that before it's caused by the camera being dropped on its lens while the lens was out. It can be repaired though it's fairly expensive too, in my honest opinion you'd be better off getting a new camera. ... Digital Cameras

Lens error my camera keeps saying lens error and then shuts off My Kodak M753 digital camera is telling me "lens error: 1,1,5,1,0,0", how can I fix this? - I have no proof of when I bought it, so a refund is out of the question. my camera was covered by luggage and now when i turn it on, it says lens error


It could be jammed or when you turn it on, your finger or somthing is in way of it opening all the way. ... Kodak EasyShare M853 Digital Camera

I have a sony cybershot, model DSC-W55. when i press the power on button, the camera does not turn on as it usualy does. instead, i get a black screen with the word Access on it. (also, when i turn the camera on, the lenses keep going in and out more frequently than before.) so the screen Access screen is just there right now, but when i click buttons like menu or display it makes beeping noises and it says 'press power on and off again '. i can still view the pictures i've taken but can't seem


You can try contacting Sony - maybe through online chat if its available for free. From what you have described, it sounds like a hardware failure. Contact Sony, and if it is a hardware failure, they will replace it for free. Or, if you have bought i ... Sony Digital Cameras

I have a Canon Power Shot SD790Is DIGITAL ELPH and the camera keeps saying card error, card locked. I am aware there is a switch on the side of the card, and it is currently unlocked. When I turn the camera on however, it still says there is an error and that it is locked! Please help! Thanks.


HelloOk, here is something you can try:In your case the \015\012problem is not with the card but rather with your\015\012camera's card reader. This is a rather hard problem to fix yourself but\015\012here is what you can do. ... Digital Cameras

When i turn on my camera it says turn power off and on again and i keep doing that but it says the same thing what do i do ?


Try removing the Battery out of the camera. Then hold the Power switch on for one minute or more without releasing switch. Refit Battery and try switching on again. Keep fingers crossed, it worked for me. ... Sony Digital Cameras

On my camera when i turn it on the lens keeps opening and closing and on my screen it says "turn off and on again" and when i do that the lens keeps opening and closing and it doesn't work. Can you help me please?


This is the most common problem with dig cameras. The reason being that there are tiny gears inside the lens assembly, that operate it. When a tooth gets broken off, or some dirt, lint, sand, etc., gets in the lens assembly, a gear can get jammed ... Digital Cameras

I have small SONY DIGITAL CAMERA DSCW90S,when you turn it on the lens barral slide open, then closes then slides open then closes, the lens shutter keep nicely opening and closing but the barral is not stable keeps oppening and clossing for couple of times and then it says TURN THE POWER OFF AND ON AGAIN, but when i do so, it doesnt help. please help me, thank you :) Alena Lorinczova, DUBAI, UAE


... Sony Digital Cameras

Error message When I turn my camera on in pic/video mode it says 'TURN THE PWER OFF AND ON AGAIN' I do... and it just keeps saying it. Any help??


I tried all of this too and then i read that the problem lies with the silver circle shutter on the front. I started trying to find a screw driver to take the thing apart and couldnt find one small enough so i gently moved it up with my finger and th ... Sony Cyber-Shot DSC-T33 Digital Camera

Blurry pictures I've had this camera for almost a year and everytime I want good pictures (vacation, birthdays, xmas) I'm disappointed with the quality of my pictures. So many of my pictures turn out blurry. And sometimes they'll look fine when reviewing on the camera, but when downloaded to my computer, the quality is poor. Some people say they keep their's on the auto setting, I find I need to keep mine on the nighttime setting to get decent pictures. Any sugggestions with settings, etc to hel


Try turning of the stabilizer if you have one it will be in the settings menu ... Canon PowerShot SD1000 Digital Camera

Sony cyber-shot 7.2-Megapixel Digital Camera pink DSC-W120 lens keeps going in and out it want stay out so its says turn your camera off and on again I keep doing that but its doing the same thing every time nin and out


Option 1: Try Initializing the Camera as follow; (Initializing\015\012the Camera will reset the settings of the Camera to the factory\015\012settings including date and time. It will not delete any data saved in\015\012the Camera). ... Sony Cyber-shot Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4006 seconds