Having problems with your Digital Cameras ?

I have installed the software on my computer for my new Canon Power Shot A11001S digital camera. However, when I click on transfer untransfered images the images do not transfer and instead I get a message that reads: Canon Utilities Camera Window has encountered a problem and needs to close. What should I do?


Answers :

Hi,
\015\012
\015\012You can download pictures from your camera to your computer by using a memory card reader (You can use your computer's built-in memory card reader, if it has one, or you can purchase an external memory card reader as shown in the attached image).
\015\012
\015\012f72d279.jpg\015\012
\015\012To do this, kindly remove the memory card from the camera and insert it into a card reader. Now, the memory card will be shown as a removable disk in "My Computer". You can browse the images and copy the images to your computer.
\015\012
\015\012Also, this method is very quick as compared to connecting the camera to the computer, and also saves the camera's battery.
\015\012
\015\012Hope this solves your problem. Thanks for using FixYa.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have installed the software on my computer for my new Canon Power Shot A11001S digital camera. However, when I click on transfer untransfered images the images do not transfer and instead I get a message that reads: Canon Utilities Camera Window has encountered a problem and needs to close. What should I do?


Hi,\015\012\015\012You can download pictures from your camera to your computer by using a memory card reader (You can use your computer's built-in memory card reader, if it has one, or you can purchase an external memory card reader as sh ... Digital Cameras

I installed the solution disk software for my Canon Power Shot A11001S onto my computer. However, when I click on Transfer untrandfered images I keep getting a message thatreads: Canon Utilities Camera Window has encountered a problem and needs to close. My images do not transfer. What do I do?


Hi,This Message is a Common Message and could be there for MANY reasons. The best way to start with is to Uninstall the Software and then Re-Install it. If the Problem Still Persists, then we need to eliminate, is this a Corrupted Softwar ... Canon PowerShot SD1100 IS Digital Camera

Hi I have a Canon A460 which has worked fine. My problem is with the transfer of images to the computer. I get either a message saying camera not found or I get a message saying camera detected with a box underneath where I would expect to see zoombrowser or another software to launch the action. The box is empty so I can't select anything. This has only just happened recently. Probably around the time I installed a Canon MP270 printer/scanner (which is a pig to use). Thanks Pat


Well, obviously your registry has changed and your camera is no longer recognized. No problem....just get a card reader and use it in place of your camera. That's what the pros do. ... Canon PowerShot A460 Digital Camera

My MacBook Pro won't read my Canon sd940 camera on either the mac or the windows side. Image capture says ''waiting for device'' and I get pretty much the same message in Windows. The SD card works fine in my Nikon and the canon camera is 1 week old. Is it the camera?


Why not try using a card reader to download your pics? ... Canon PowerShot SD940 IS / IXUS 120 IS Digital Camera

There are images in my Canon Powershot camera.But when I try to transfer them it displays an error message as "There are no images in camera or memory card that match the download conditions". How do I get the pictures transferred?


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Hello, new user for canon rebel. read manual for basic instructions & still get message : no image when i attempt to take a picture. how do i get the camera to show the image i'm aiming at?


Unless you have a Rebel XSi with "live view", you're not going to see the image on the LCD before you take the picture. No digital SLR made before 2007 had this option. You compose your picture using the optical viewfinder, and only see your picture ... Canon Digital Cameras

I have all the softwares installed in my computer. I have downloaded images no of times. But its not happening now 1) Camera gets connected to computer 2) The window appear on the computer Where i click on ''canon camera window'' 3) CameraWindow displays on Computer & Direct Transfer Menu appears on Camera 4) i click on ''New Images'' on camera, its not transferring If i click on ''Transfer untransferred images'' on Camerawindow on computer, it says ''Folder not found'' what should i do?


Find out where "Canon Camera Window" points to for its default pictures Folder and change that path or create a Folder in the location where it is pointing to ...It seems to be directing the pictures to a non-existing Folder ! ... Canon Digital IXUS 860 IS - Digital camera - compact - 8.0 Mpix - optical zoom: 3.8 x - supported me

Hi - I have a Canon Powershot A 540. I tried to put the memory card into my PC's SD Card Reader to transfer the photos. The PC could not read the SD card and when I put the card back in my camera the message says No Image. What can I do to recover the photos that are on it? Thanks!


... Canon PowerShot A710 IS Digital Camera

Transfer images My camera is broke, the error reads "Lens Error M525-22 ( 7f80). I've tried calling Best Buy where the camera was bought and I've tried calling Hewlett. Neither has been helpful. I need to know how to get my pictures on my camera off since I can not get into the menu option to transfer them to the card. Please help!


IF you have a USB cord, you can possibly plug in your camera an PC and copy all the pictures to your computer. Give it a try. ... HP Photosmart M525 Digital Camera

EOS Utility I purchased a Rebel Xsi, and installed the software. Upon connecting my camera to my computer, and launching the EOS Utility, the options to download the images, select images, or camera settings are shaded out. In order to transfer pictures, I have to go into "My Computer", open up the camera and copy and paste it. I have updated all of the software from Canon's website with the June 2009 updates, and the problem persists. Thanks for the help.


I got the same problem updating the EOS Utility. The version on the original SXi CD is 2.4.0.1. The upgrade is version 2.6.1. I suggest you to uninstall all the updated software. Or at least the EOS Utility. Go to the folder <C:\\Documents and Se ... Canon EOS Rebel XSi Digital Camera

Card Error None of my 3 memory cards are being accepted by my camera all of a sudden. I get a Card Full message, but when I try to view the images, the screen reads No Images. I've tried to format the cards again, but get a Card Error message. I've updated my firmware. The manual doesn't offer any suggestions for this error that I seem able to repair on my own. Any ideas?


If you are using a card reader for transfer to the computer, it is possible that you are corrupting your memory cards by accident (you have to make sure to eject the cards before removing them from the card reader). Try a new card and see if it will ... Olympus EVOLT E-500 Digital Camera

When I connect my camera through any USB port on my macbook, the transfer process will always begin fine, however the process will not complete. I get a "failed to transfer the image" error message as well as an inadvertent USB device ejection message. Is it the camera? cord? card?


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Olympus Stylus 830 Digital Camera

Photo transfer I have a Sony Vios running Vista. I have a casio exlim 550 camera with an SD chip. When I put the chip with photos into the SD reader slot I get a message say Photo Gallery cannot read the photos in their format. When I put the SD chip back into the camera and the camera into its charging/transfer base plugged into a USB slot the photos transfer just fine. I need the pics to transfer through the SD slot on the front of the Vios. Anyone have a fix to this? Thanks. Dave


Change the pic format options in the camera to read *.jpeg intead of *.raw\015\012\015\012if they are in jpeg maybe the computer dosn't understand the way the camera formated the sd card mine dose the same thing when i try to tranfer imag ... Digital Cameras

I own a canon powershot S3 is and I am getting this strange E24 error where in the camera lense would comes out and just goes in . Another interesting thing I observed is when the LCD is on and I am in the image display mode (That is browsing the existing images) then there is no problem if the LCD panel is open or closed the camera just seem to respond normally, only when I change to the shooting mode the camera lense would come out and go in with the camera shutting down. what is problem with


It sounds like it needs to be serviced. If you're out of warranty, then go to this site: www.camerasandparts.com They just service the Canon Powershots exclusively and they ... Canon PowerShot S3 IS Digital Camera

Camera will not read disc, I have formated disk and have transfered pictures onto disc. Disc is working and can view pictures from disc on my computer. when I put disc in camera I keep get message to formate I have done this several times and still camera will not read disc.


If you have moved pics from your computer to the card and then inserted the card into your camera, the card is now formatted to the computer, not the camera. You're supposed to format the card in the camera. ... Kodak EasyShare P850 Digital Camera

JUST USED MY CANON 950IS FOR THE FIRST TIME USING A SANDISK ULTRA II SDHC 4GB CARD. DOWNLOADED FIRST PICTURES ONTO LAPTOP USING THE MICROMATE WHICH CAME WITH MEMORY CARD. WHEN I'VE PUT THE CARD BACK IN THE CAMERA, A MESSAGE COMES UP ON SOME OF THE IMAGES 'INCOMPATIBLE JPEG'! THE IMAGES ARE STILL THERE ON THE CARD BUT THE CAMERA DOES NOT SEEM TO WANT TO READ AOME OF THEM. IS THIS A CARD OR CAMERA PROBLE ??


Sounds like a card problem. Did you format the card in the camera when you first got it? If not, recommend formatting it using the camera. Look for the format option in the camera's menus. Note that this will also erase all images from the card, ... Canon Digital Cameras

Hi, I got a new ProSpec 4gb flash card and used it last night in my canon 40d. I forgot to format before I initially used it. Shot lots of great images that I could see on the camera back, but now I am getting the messages - can not create a folder, tried to shoot another image and is says cf card is full, and now I can't review on camera, it says there are no images. Tried Digital Photo recovery software and got nothing. Anything at all I can do? I'm tempted to format now and then see if I can


I do not have a solution, but I do have same problem, or a variation of it: filled my ProSpec 2GB, removed it from my Canon G10 to insert a fresh card, then later reinserted the ProSpec to transfer photos to computer. Several tries, and no go. First ... Canon Digital Cameras

I am attempting to use "Eye-Fi" connect /x2 with my canon 5d. Since my camera accepts CF cards I am using the SDHC EYE-FI card in a SD/SDHC CF ADAPTER. (SDCF-01). When I insert the SDGC Eye-Fi card into the adapter and load ithem into my 5D, the camera first seems not to be reading the card and then gives message, "Card not formatted". When I attempt to format the card in my 5D, I get the message "Cannot format card". I formatted the card in my computer and again tried to use it but the messa


... Canon EOS 40D Digital Camera

I cannot get Remote Shooting option when I loaded the software for my Canon 350D (Rebel XT) camera on a computer with Vista. The software loads the Remote Shooting option for computers with Windows XP. Only option I get under Camera Settings is, Acquire and transfer images to memory card. Can anybody help me please.


According to Canon, camera communication is supported by Vista, like you have experienced. See:\015\012 ... Canon Rebel XT / EOS 350D Digital Camera

I can not down load my Canon 5d Mark 11 camera images onto the computer. I get an error message of /parivate/var/tmp/folders.501/temporaryitems/photo/MG_6728.cr2 How do I get around this message?


Not a solution to this problem but a workaround would be to use a SD card reader(available in most desktop computer or laptops). Yo will have to take out the memory card(SD card) from the camera before doing this. Hope this helps. ... Digital Cameras

Help please I'm having difficulty with my camera; it continues to tell me my batteries are exhausted but I know they're good. I can't get the screen to come on and I also get a message about no images marked for transfer. I have my usb cable in and that is the only time my camera will come on. can you help


With my camera I have the choice of using AA batteries (which last for about half an hour of use) but I almost always plug in a rechargeable battery pack instead. The AA batteries inside the camera are apparently disabled while the cable from the ext ... Nikon COOLPIX L4 Digital Camera

I have a new Canon PowerShot SX130 IS digital camera. I have my first four pictures on the camera. I have installed the camera software on an IBM ThinkPad T61. When I try to connect to move photos to my computer, I get the message "Failed to import images." I have disconnected all USB cables except for the camera one, and then rebooted.


Hi!It seems like a known issue with Canon's software - with no solid solution so far... People inform that they get this error when trying to copy large amount of photos at once, but almost never when trying to copy smaller amount (about ... Digital Cameras

Canon Vixia HSF100 - I've successfully transferred video files in the past, and have just transferred photos from camera to computer without problem - but when I try to transfer video files I get the message -'can't find any files to transfer to the computer'. This happens repeatedly, I have already reinstalled the software. The removable disk shows approx 6gb of files, but the computer does not recognise them. Any suggestions?


Hi!I read your corresponding posts and it seems to me that the problem you have is related to the USB mode of the camera.Make sure that when you connect the camera to the computer, you set it to PC/PRINTER mode!If that fails t ... Digital Cameras

I have olympus digital camera d-595 zoom. The camera is connected to the PC with a USB however when I'm transferring the image from the camera to PC I get this message "the software is unable to find an olympus digital camera connected to a USB port". What could be wrong - I have windows XP.


When the camera is connected to the computer does the camera LCD screen show a USB menu on it with the option of PC highlit? If so, then you need to press Ok on the camera to get the camera and the computer to start communicating. Once communicatio ... Olympus Digital Cameras

I cannot seem to download the pictures I have taken on my Canon PowerShot A410 to my computer. I am on the playback setting and I connect my camera to my computer, but I just get a message from Camera Window that says "Cannot detect Camera. Check connection to camera, then retry." I have even downloaded ZoomBrowser EX and clicked on the "acquire images" button but nothing happens. Please help!


Use a card reader to download your pictures to a folder you create on your desktop. ... Canon PowerShot A410 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5155 seconds