Having problems with your Digital Cameras ?

I went to the beach and my camera got some sand in its lens and now the lens is stuck. What can i do ?


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Sanyo digital camera got sand in the lens at the beach and now the lens thing is stuck. and when i turn it on, it stays on for a second but then says Lens Error: 0x13010020


Fixing a Lens Error on a Digital Camera This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart ... Sanyo Digital Cameras

Lens Error My daughter and I just got back from a trip to St Croix. We stayed at a resort on the beach and also went snorkeling. The camera was exposed to sand and water. While snorkeling we had the camera in a zip-loc bag so I do not believe it got water in it but I know that while on the beach it may have gotten sand on it. Now the lens won't retract and we are getting a "lens error 12". Any suggestions? Thanks


Hard choices here my friend. Sand in the lens system is bad news.Jams up the close fitting bits. You basically have two choices. Get the camera repaired or throw it away and buy a new one. Cost of repair will likely exceed the v ... Kodak EasyShare C330 Digital Camera

I went to the beach and my camera got some sand in its lens and now the lens is stuck. What can i do ?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Digital Cameras

The lens seems to be stuck. I can't get it to retract. When I press the on/off you can hear ''gears'', but the lens doesn't move. My daughter had it on the beach and it's possible that sand got in the camera.


The lens have been moved a little to the left or right. This is a common problem on Kodaks. Try to put as hard as you can on the lens to get them unstuck. This worked for me. ... Kodak EasyShare One Digital Camera

We took our camera to the beach and it got sand in the lens and now the lens gets stuck. what can i do?


You can try taking it apart or sending it to us, pretty inexpensive repair ... Kodak EasyShare C360 Digital Camera

Digital camera got dropped into the sand, and some sand worked its way into the lens and focusing system, and now the camera cannot zoom or focus, but still turns on and takes pictures i have a lumix dmc fx12, and it got dropped into the sand at the beach. the shutter wont close properly, there's sand in the lens, and it won't zoom. Please help!! i don't know how to fix it!!


THIS SOUNDS TERMINAL, BUT YOU MIGHT TRY USING CANNED AIR LIKE YOU USE TO BLOW DUST OUT OF YOUR COMPUTER, AND SEE IF IT HELPS ANY. MOST OF THESE CAMERAS ARE MADE WITH THE IDEA THAT THEY WILL NEVER BE TAKEN APART OR OPENED FOR CLEANING ETC. SO, THAT IS ... Digital Cameras

Lens error i brought my camera to the beach and sand got on the camera. i got a majority of the sand out, but the camera continues to say "lens error". help!!


The very smallest piece of sand will jam any digital camera lens. You should be extremely careful to never allow sand to get anywhere near any digital camera. The gears are very small, thus the smallest piece of debris will do a lot of damage. To rem ... Nikon COOLPIX L3 Digital Camera

Lens error When I try to zoom the lens, it comes up with a lens error. We just got back from a trip to the beach, where my daughter accidentally kicked up sand while she was running toward me and I had the camera ready to take her picture. When I power up the camera I can hear a gritty sound when the lens extends. I've cleaned up the rest of the camera, but don't know how to get the sand out of the lens housing.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will hav ... Canon PowerShot S3 IS Digital Camera

While at the beach, someone threw a frizbee at my wife and she dropped the camera in the sand. We were careful as we could be picking it up to avoid entrance of sand into the camera. It worked fine until the next day and the lens opened and stuck. I opened the case to remove and sand that entered the camera. While removing the flash it went off and now the camera doesn't even turn on. I assume something touched and blew a fuse. Is this fixable and if so where do I start?


Well, your mistake was opening the camera. You will need to have it serviced. ... Canon PowerShot SD890 IS / IXUS 970 IS Digital Camera

Today i went to a beach nad my camera fell in the sand. After taken it out when i switch on, the lens does not move at all. It is stucked because of sand and on the screen it says "lens error, restart the camera". So in order to get it fix, what should i do? for information, i bought it from best buy in houston last thanks giving.


Sorry to hear that shivamfc. You are an unfortunate Canon user with the unlucky results of digital camera + sand = dead.To make the camera to work again, you need to be sure to remove the sand that got inside the lens mechanism, unfortun ... Canon PowerShot SD880 IS Digital Camera

Lens Error i open my camera to clean the lens, the thing is a friend drop the camera in the beach, so part of sand got enter the lens. i want to know, if there is spare parts for this camera and how much does it cost


As a camera repairman, I can tell you that even replacing parts, you will never get all the sand out and it will most likely continue to give you problems.Sell it for parts on ebay and buy a working one. ... Nikon Coolpix S210 Digital Camera

Ok i brought my camera to a beach and i think sand got into the lens idk but i have a kodak camera and when i try to turn it off or on the lens wont close


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Digital Cameras

Lens cover i dropped my camera for the first time in the sand. i guess grains of sand got stuck inside and the lens cover will not open fully. i've tried compressed air. any other ideas?


I was lucky to solve my problem with sand-stuck-lenscover with 6 bar compressed air. ... Nikon COOLPIX S9 Digital Camera

Heya i have a cannon powershot a480 and i got it near christmas time and when i turn it on it says "Lens error, restart camera" and i keep trying but it doesnt work, I took it to the beach the othe day and i think it may have a tiny bit of sand inside it but it work for a few minuits after it got sand in then stopped working Please could you help me? Thankyou <3


Fixing a Lens Error on a Digital Camera This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “le ... Digital Cameras

I was at the Beach, and sand got in my lens.. when I turn My camera On, The lens come out a tiny bit then go back in.. and the camera makes a beeping noise. Please Help!!!!!


Needs to be repaired by cleaning it out. There's probably sand in there.\015\012Contact the manufacturer for further details on the issue including a price schedule for repair or replacement, depending on how old the camera is and whether it's ... Digital Cameras

Brought my cyber-shot to the beach and had it in a camera case. When I got home it was a little bit moist on the inside of the case, and the lens would not open at all. On the screen it said to power the camera on and off again. There were a few grains of sand around the lens so I gently tapped in and it opened. Now, although it is opening I still cant take pictures. It is still giving me the same message to power it off and back on. Is this fixable?


How long since this happened? Has the camera had time to fully dry out?\015\012Open all orifices, and let it sit on a dry paper towel, or cotton towel somewhere safe until it is fully dried out. Remove the batteries from all locations before y ... Sony Cyber-shot DSC-N2 Digital Camera

The entire zoom lens will not come out when I turn the camera on. It moves a little, makes a sound, and then my camera says turn off camera off and back on. I tried that several times and it is still not working. The battery is charged. I did go to the beach and wondering if sand got into the camera. I also cannot review my pictures as the message comes up about turning it off. What is the best solution?


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Panasonic Lumix DMC-TZ3 Digital Camera

I took my camera to the beach the other day and it was working fine, when i got back home i realized my camera had gotten some sand in it. When I tried turning it on the camera kept trying to focus and is now saying lens error. Is there anyway i can fix this problem myself??


Fixing a Lens Error on a Digital Camera This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart ... Digital Cameras

My camera's optical zoom isnt working. when i was on holiday little bits of sand got stuck in the zoom lens and now it wont come out and isnt allowing me to take pictures. the camera turns on, but comes up with a message saying "turn power off then on again."


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Sony Cyber-Shot DSC-S40 Digital Camera

When turning the camera on (SANYO S1275), it partially turns on, then displays error message "lens error 0x0311" then turns itself off. It had been used at the beach so I suspect some sand got into the lens. Any tips on how to clean / rectify?


I,This is a common problem on this set. The lens error is common for cameras with telescoping lenses.\015\012\015\012You can help the motor by connecting the AV cable --- this keeps the LCD off and ... Sanyo Digital Cameras

I went to the beach yesterday and i brought my camera. but it workd fine even aftr we left. but today i used it. turnd it off and tryied to turn it back on and it made a sizzling noise. i got the lens to pop out but its stuck there. i cant get my camera to turn on. HELP PLEASE!!!


HelloThe problem is that the lens has become stuck in the barrel\012 after some sand particles got wedge in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a profess ... Samsung SL202 Digital Camera

Hi, my Kodak easyshare MD41 will turn on but when i do it retracts the lens right away. i took it to the beach, so im guessing sand or the sand dust got in it. Is there a way i can fix this without having to buy a new camera or take it to customer service? And also have it fixed before March 14th, 2011?


You are right it got some sand into its eyes. You know that canned Air you can get at the office supply stores I used it to blow out the sand. Remember it will blow refrigerant out if you shake it, or turn it upside down. I set it on a table so I co ... Kodak EasyShare One Digital Camera

The Beach When i was at the beach, i dropped my camera in the sand (the lens facing down). i tried blowing the sand out, picking the sand out with a needle, and nothing worked. the camera still work. but when i turn my camera off, the door that covers the lens, won't shut.What do i do?


You may want to call Olympus Customer Service and discuss their repair process and procedures for sending the camera in to have the lens assembly cleaned. Their telephone number is 800-622-6372 option 2 and then option 3 ... Olympus FE-190 Digital Camera

Digimaster Happycam 5010 Problem: The shutter that protects the lens is stuck fully open. The camera is stuck with lens fully extended. ERROR 2 appears on the screen. The LED near the top left of the display flashes red. The camera will not take pictures. Before the camera got stuck the movement was getting more and more difficult to achieve. I needed to switch the camera off and on. This camera seems to be identical to the Premier Camera SL-8.


Camera lens mechanism is broken, need new lens assembly. Cost would be more then camera worth. Better to get new camera. ... Digital Cameras

Got sand in lens cover on the beach and now won't turn on...


Yous cold try vacuuming any thing out- tape the crevice nozzle over the leans mount.\015\012But repair is not a likely option. ... Konica Minolta DiMAGE G530 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4268 seconds