Having problems with your Digital Cameras ?

When i open the cam to display my object it switches off its ok if i dont fully open it

Answers :

Hi, you have problem in lens gear maybe damage or something dust or sand goes inside of the said gear. try to open and clean the lens unit and you can't do that just bring to service center and request for cleaning.
\015\012thank you
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When i open the cam to display my object it switches off its ok if i dont fully open it

Hi, you have problem in lens gear maybe damage or something dust or sand goes inside of the said gear. try to open and clean the lens unit and you can't do that just bring to service center and request for cleaning.\015\012\015\012thank y ... Digital Cameras

Lens stuck Please help me, I tried to turn on my camera today (it had been working fine before) and when I tried to switch it on the lens would not fully it open and my camera was making a whirling noise. The screen is black and will not take photos. The lens won't open fully and when it does eventually close has difficulty doing so. The camera then makes a beep beep beep noise and displays "Please turn the power on and off again". Please help I can't live without my camera and can't afford

If the lens is not coming out, its stuck, or it wont completely open or close, that is the lens assembly, that needs to be repaired. You need to take it to somebody, that can either repair it or replace it for you. There is nothing that can be done, ... Sony Cyber-Shot DSC-P8 Digital Camera

Code m437-001 My camera has displayed code m437-001, the lens cover does not open or close, also the lens does not come out fully or when switched off does not retract fully

Try the procedures in this tip. ... HP PhotoSmart M437 Digital Camera

I dropped my Lumix TZ4 camera in the snow very briefly. I picked it up and wiped it off, but it shut down with the lens still open. Although the battery is fully charged, the on/off switch does not work and the lens remains open. There is no screen display and no response at all from the camera. Is there a reset I can do?

There is no reset ..the only thing you can try is remove the batteries and insert a new set while you keep the power button pressed..and hope the lens are ok and they retract ..otherwise you have to get them to a repair shop and have it stripped ..ca ... Panasonic Lumix DMC-FZ8 Digital Camera

Digimaster Happycam 5010 Problem: The shutter that protects the lens is stuck fully open. The camera is stuck with lens fully extended. ERROR 2 appears on the screen. The LED near the top left of the display flashes red. The camera will not take pictures. Before the camera got stuck the movement was getting more and more difficult to achieve. I needed to switch the camera off and on. This camera seems to be identical to the Premier Camera SL-8.

Camera lens mechanism is broken, need new lens assembly. Cost would be more then camera worth. Better to get new camera. ... Digital Cameras

Digital camera I've got this digital cam SAMSUNG L100..when the memory is in the cam I can fully see the pictures but when i've tried to connect the usb to download pictures, it wont show anything..it said the memory has been protected I dont how to open it.. please try to help me

Personally i never connect the cam to pc using the usb cable, i take the memory card out and put it in an sd card usb adapter, you say the images are protected, this tells me that you have the lock switch activated on the sd card...hope this helps :) ... Samsung L100 Digital Camera

When I push the power-on button the LCD display briefly flashes on with the "Pentax Optio" screen and then switches off. The lens is stuck half-way open, and the camera will not stay powered up. The battery is fully charged (as well as the backup battery) so that isn't the problem. Is there a "camera reset" procedure for this camera? Other ideas?

Good day,This is a common problem and sometimes can be fixed.Please see details on my tip on how to fix this error here:http://www.fix ... Pentax Optio A10 Digital Camera

Slider Prob I've had my S30 for quite a while and lately i've had some problem with the slider opening up. Dont know if something got in between the slider and the cam or something. Anyway with some trouble i could still open up the slider and thus start up my cam but then one day when i was trying to close my cam i started to slide it to close. Finally it closed and i slided the slider onto the lens but then the lens started to open up again. But the slider was in the way so the lens opened up

Dang, what a weird design. The lens needs to go threw a cycle before it can reach the idle position where it waits for a comand from the user. If its in the closed position and you turn it on it extends to its full range then stops at the idle positi ... Canon PowerShot S30 Digital Camera

Hi, My pentax optio WP don't work anymore. When i switch it on, it stops after 5 seconds. If i start it in read mode (blue button pressed whil i switch it on), it works, but the menu button dont't work and displays a yellow lock on the top of the screen. If i switch it on with the menu btton pressed, it displays ver 1.00 before to stop after 5 seconds If i switch it on with the menu and the blue btton pressed, it displays ver 36, then xxx test xxx and v 866-76 , 1.0001 before to stop after 5 sec

Some of those buttons work in combination with the two dials (i.e., setting ISO and white balance, etc.). Hold a buttin down and user the knobs simoultaneously.If this is not the issue, please describe specifically which buttons are not workin. ... Pentax Digital Cameras

Lens error When the camera is switched on the lens does not open out and the lens cover does not open. The camera then displays a "lens error" message and suggests that the camera be restarted ten switches off. This happens repeatedly.

This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Canon PowerShot SD750 / IXUS 75 Digital Camera

The camera when switched on displays in the top lcd display 'Err' yet shows battery as fully charged. ive reformatted my memory card via pc. changed the lithium cr 123a batteries for new ones. fully charged the 4 x AA batteries. the aperture ring lock is set to 22 on the 28mm-80mm af nikkor d lens. i have it set to af and auto but have tried all other camera setting i can access. it will focus no problem yet will not allow me to do anything else. i cannot access the menu eg func, play, in

Hi.Err means that the camera is in fault mode. There is no code, so that the fault is generic. This kind of error is often associated with shutter problems or other loens error. If you have a spare lens, remove battery and test the spare ... Fuji FinePix S1 Pro Digital Camera

Attention Fixya site I have a Canon Camcorder 750i Unit does not display in record mode either with screen closed for eye piece vision or screen vision fully open. This applies to either when record or pause are envoked. In a playback mode displays show a blue screen for an unrecorded area of a tape and change to a dark grey screen when it reaches a recorded section same as what was displayed shows whilst recording. Pre-recorded tapes when camcorder did not have the problem can be

Symptoms in your Canon camera shows problem with CCD Image Sensor. Can ... Digital Cameras

Shutter problem hi! My camera DSC-P52 , which is a year old, is giving me some strange problems. When i switch it on , the shutter doesnt open completely and makes a weird crackling noise and then beeps a few times and it says on the display to shut down and switch on the camera again. And then if I point to setup and switch it off it closes. Any solutions. please help. thanks anshul agrawal

I have the P51 (2MP) and lens cover also gets jamned opening and closing most of the time and gave same message as yours. The camera was out of warranty and my Sony dealer said it was pointless reparing it as it would cost half the price of a new (an ... Sony Cyber-Shot DSC-P52 Digital Camera

Pl50 lens dont open fully

Try these procedures. ... Samsung SL Digital Cameras

Sony dsc-13 I have sony dsc-13 digital camera and suddenly after switching it on in picture mode and video mode the data(day nd time,flash....etc) appears on a black background on the lcd though the lens door is open and i can see my previouly stored pics in the camera lcd and also in my computer after connecting through usb.. so the problem is i take black pics and videos while the lens is open and the charger attached or on full battery,and the new taken pics displays black as well

Basically it is a Japanese Model from where u bought it u are lucky u can\015\012get it free of charge replacement just tell me which region u belong\015\012there is a known issue of CCD failure u will get free of charge repairs\015\012fo ... Sony Cyber-Shot DSC-T3 Digital Camera

My Pentax Optio M60 have problem with display. When you turn on the camera the display is fully black so you cannot see the object what you want to pictured. Servis man say that motherbord is dead and it is best way for me is to buy a new camera. Can somebody help me with my problem?

The service man you talked to is correct. It will cost more than the camera is worth to get it fixed, if you can find someone to fix it at all. Cameras are available now with much better specifications than a year ago, at lower prices than ever. It m ... Pentax Optio M60 Digital Camera

My Pentax Optio M60 lens seems to be frozen half way out of the camera with the lens cover also partially open. When I turn in onn it sounds like the lens is trying to focus then turns intself off. Nothing is written on the screen unless I also press the menu button which displays VER 1.00 before bleeping three times and turning off or the green button which displays VER 0163A SBM -FIRM before beeping 3 times and swithcing off. Nothing else seem to do anything. I havn't dropped it or got the cam

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will hav ... Pentax Optio M60 Digital Camera

Hello sir, I have olympus C-70 model which is working very good for last 5 years. I am on vaction to france and it worked well till last 2 days. I have switched it off 2days back and switched on last night and it is not getting started. I have charged Battery fully and tried and still it is not getting started. Please help me in njoying my vaction with my Cam

Hi try to reset ur camera...To do such reset, turn on the camera and\015\012hold the menu button down for longer than 5 seconds. A message should\015\012hopefully come up on your LCD asking if you want to reset the camera.\015\012Select Yes...t ... Olympus Digital Cameras

Camera will not turn on my nikon coolpix s51 will not turn on fully. the green power light shows on but then it goes off after a few seconds. i have not tampered with the card but i know the battery is fully charged - tried twice recharging it. the lsd screen does not come on at all, nor does the shutter lens open at all. it is not responsive to anything at all, except a green light coming on the 'on' switch but then going off again... any ideas?

... Nikon Coolpix S51c Digital Camera

Kodak M1093 The lens is stuck open and it will not power on. Blue power light comes on. There is no display. Battery is fully charged. I removed battery and SD card and pushed power button twice. Used on USB cable for power. Tried a different SD card. Same results. (lens is stuck open and it will not power on)

... Kodak EasyShare M1093 IS Digital Camera

Hi i was playing badminton with my olympus fe200 camera in my pocket. after the game, when i tried to switched it on.the shutter opened and remained open. no display on the screen. and the shutter is not going back inside. is there any way to fix this problem?

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Olympus FE-200 Digital Camera

DCRSR-190E screen switches off when fully open - only works when partially open. Could this be a ribbon cable / flexi PCB cable issue -0 is this a common fault ? Neil

Its flexible wire / ribbon problem and lcd screen will work fine after replacing this part. ... Digital Cameras

Stealthcam stc-wd3mt-rt wont turn on at all batt fine any help the cam is out of warranty but this is first time its been used took four picks i got it home to look at them has not turned on since has power to cam and to circit board inside and the on/off switch is working thats as far as i can go without help just dont know

... Digital Cameras

When i switch my camera on the lens opens but retracts immediately and the camera switches itself off - (it is fully charged)

Possibly the internal battery is at the end of its life and not hlding the charge. Try a new battery if possible. ... Kodak EasyShare One Digital Camera

My panasonic lumix fz28 gives me an error saying "Error in O.I.S." and "please switch off and switch on the camera". It still takes pictures and all the features are fully functional, after the first picture the following messages mentioned above are displayed. Can you please help me with the issue? The camera is a few months old and has never been manhandled or dropped,it seems to have developed a problem overnight.

This error is for the optical image stabilisation. \015\012\015\012Generally the camera should be ok after your turn it on and off again. The error you are getting is because either the OIS has malfunctioned or is stuck.I thi ... Panasonic Lumix DMC-FZ28 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1673 seconds