Having problems with your Digital Cameras ?

I need to wire my Countryman B6 to my new Sennheiser SK2000 transmitter w/ a 3 pin Lemo


Answers :

Hi,

Please elaborate your problem providing us with more details of the issue.

Thanks.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need to wire my Countryman B6 to my new Sennheiser SK2000 transmitter w/ a 3 pin Lemo


Hi,Please elaborate your problem providing us with more details of the issue.Thanks. ... Digital Cameras

Somehow when I put the CF card in, I bent one of the pins all the way down. Not sure if it can be straightened or it might need new set of pins.


HiNot sure what model you have, but the answer can change depending on model.You can definitely try bending the pin back straight by sticking something down there; hopefully it won't snap off and all will be well.I ... Canon Digital Cameras

I have an underwater camera "Atlantis AUW-502" that I can't find any wiring schematics for. I had problems with losing the picture, so I took the camera apart and need to know which wires from the camera (lens/board) get hooked to the main cable, which in turn get hooked up to a 4 pin s-video plug.


... Digital Cameras

Need new pins for rebels XT


Canon's info: To order an internal replacement part, please call 1-800-828-4040. The\015\012hours of operation are 9:00 A.M. to 8:00 P.M. EST from Monday to\015\012Friday. When calling, speak the term "order parts" when the speech\015\012routing syst ... Canon Rebel XT / EOS 350D Digital Camera

I try to put a pin code for my new phone LG GR500FD..but when i did is block and i need to put the puk code.but i dont now what is that puk code?.can u please help me.


You have to ask your service provider for the PUK code. ... Digital Cameras

I want a list of the likely different faults which can cause an Olympus C-5060Z not to power on. I'll do the rest. A wiring schematic would help too. I am aware of possible cause being the On/off switch under mode dial and how to replace that, and have a new mode-dial/power switch part, but while the camera is open where the switch can be function tested at ribbon cable connection, I need a check-list of the other most likely causes in the order of most likely to least likely. That means any


Here's an excellent blog about dead camera problems:\015\012http://camerarepair.blogspot.com/2007/11/simple-fix-for-de ... Olympus Camedia C-3040 Zoom Digital Camera

Well i got this one for chrustmas in 2008 and i lost the wire and i need a new one where can i get one


Probably you need a mini-USB cable. These can be purchased cheap from Amazon. Here's one example. But you know there's a better way to d ... Digital Cameras

I put new batteries in my camera but it says i need to change them. Why is it telling me that I need new batteries when I just put brand new ones in?


You must be using battery available at the store having the handling capacity of 250 to 300 ma\015\012what you need to use is a rechargeble battery with a capacity of 2100 and above this should definately solve your problem ... Digital Cameras

My new Kodak M1093 says my new 2GB SD card needs to be formatted and it runs formatting on it but goes back to original screen that it needs to be formatted. I reformatted in my PC...same thing in the camera. It's done this with 2 new SD cards. PLEASE tell me the camera's not broken!


Your card might be protected.\015\012Please change the position of the lever on the SD card. ... Kodak EasyShare M1093 IS Digital Camera

I need a wiring diagram for a hmn 1016a Motorola microphone. It goes to a Motorola Maxar 50 mobile radio. I need the color of wire pinout for each wire. thanks


... Digital Cameras

Camera my new computer says i need a new driver for this computer designed for windows xp how do i get what i need thank you


Hi if still need this driver you could try here Largan Drivers - Largan Windows Driversriz. ... Largan Chameleon XP Digital Camera

My LCD screen in my Canon FS10 needs to be replaced. I have a new one but need to know how to remove the old one and replace it with the new one.


Hello. I noticed your request has been here for some time. I'm not familiar with your camera model and therefore can't give you good repair directions. I will tell you a very good way to learn about camera repair if you have an intrest. This may seem ... Digital Cameras

The lens is stuck in the open position and will not retract. I have been told I need a new lens altogether. I have located a complete lens on Ebay but need instructions on how to remove the old lens and fit the new one. Can you help.


... Canon PowerShot S3 IS Digital Camera

Dear Sir/Ma'am, I have a FS100 SLV Canon Video Camcorder. My charger does not work So I need to order a new one. I went to the local Canon Repair shop and ordered the part after they confirmed that was my problem. That was several months ago and still nothing. I have followed up several times. I would like to order on line and have a new one shipped to my home in Manila. Thank you for your advise about where I can mail order the part I need. Please send address information about how I can b


Hi,You could order it from :-https://www.cellularfactory.com/camcorder/CANON/3/73398/They also have options to send it to Manila.Let me know, if needed further assistance.Hope i helped you. ... Digital Cameras

Hi, I have purchased the Canon Digital Ixus 95 IS some time ago and all is working well. The problem I have is that I've lost the Digital Camera Solution Disk and as I need to work on another computer I will need to install all software on this new computer. Can you tell me how I can solve this (download this Disk somewhere else or request new disk)? Hope you can help me. Best regards, Danijel


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster t ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera

I just bought a new nexxtech 16gb sdhc memory and everytime i turn on my camera it says the memory needs to be formatted. after choosing "continue" when it says formatting will delete everything it shows then formatting screen then says the memory card needs to be formatted... again. i've gone through this whole song and dance at least 30 times and still nothing. it's a brand new memory card so i don't know what the problem is. help please?


I would check your C663 manual to make sure your camera is capable of reading a 16GB card. Because thats a fairly large drive for such a a legacy camera I would also insert the card in your PC and format it there to make sure it is functional. Mayb ... Kodak EasyShare C663 Digital Camera

I have an Olympus X-44, its new and worked fine, but since I had to install a new hard drive this and another digital camera shuts down my computer everytime its connected to my pc, I need the cameras for work and this is causing a great deal of difficulty I need the photos urgently, there are no error messages, there has been a couple of times there is a no connection message but not every time, there has been no problem with any other connection and I use printers and franking machine etc. C


Obviously there is a camera firmware issue. You said you have printers can you see if one of the printers has a set of memory card readers for "Direct Printing these look like Odd looking USB ports but memory cards plug into them. You can use one of ... Digital Cameras

I have a Nikon coolpix 800. I just bought a card for it: It reads--Lexar Platinum II 4GB CompactFlash 200x When I insert the card, it bring me to a message saying" that the card needs to be formatted; I follow the buttons and press format; it starts to format, but the process is aborted and the window fades and out comes the previous window with the message that it needs to be formatted. Now: the Office Depot assurd me that it is the right card, it is a new card, the batteries are new


Hi,Nikon coolpix 800 hardware does not support 4GB memory card as it is too big memory for this model and its hardware is capable to support maximum 2GB memory card.Nothing is wrong with camera and memory card, they just don't match so bu ... Nikon Digital Cameras

My camera will not work even when battery is fully charged. I rubbed the contacts and it worked for 2 days. Now that doesn't work. Do I need a new battery or do I need a new camera? Also tried using rubbing alcohol and qtip on contacts.


Sounds like corrosion on the battery contacts, or oxidation. They will have to be cleaned with a stronger abrasive (fine emory cloth or 800 grit sandpaper). Sometimes a pencil eraser will do it, but keep working on it, since it sounds like your ... Panasonic Lumix DMC-TZ1 Digital Camera

My camera was working fine. itook and downloaded pictures with no problem. The next day I tried to turn it on it didnt turn on. I charged the battery and put it back in the camera still it didnt come on. I even bought a brand new battery charged it and nothing happened. I need to know id it is fixable or I just need to buy a new camera


... Canon PowerShot SD300 / IXUS 40 Digital Camera

E-18 message How do you replace the lense assembly? do I need a new camera? do i need to find new parts? what went wrong?


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try if the camera's no longer under warranty:\015\012\015\012 ... Canon PowerShot SD550 / IXUS 750 Digital Camera

I have a Pelco Spectra mini in a warehouse, we replaced the previous camera with this new one but the PTZ function does not work. The old camera worked for while and stopped. We moved the new one to another location and the camera works fine. The power is local about 150 ft. on 16awg wire. The control is run via cat. 6 cable and is 1000 ft. long. It is wired to an amp that changes it to coax and feeds the DVR. There is repeater anRES MHUBX8 Hub 8 port repeater in line with one pair on it. It say


Hi. Did you call Pelco's customer support? They should be able to talk you through troubleshooting the camera to at least determine if this is a defective camera or not. ... Digital Cameras

Battery door. I have purchased a new battery cover to replace a broken one but cannot remove the pin to get the old door out and the new door in. I have remove the front and back covers but the pin won't slide out. Can you help, please. Peter


Hi Peter and I think there was someone else with a similar problem,\015\012I finally received the new cover today. I wasn't able to work out how to get the pin out but what I've done is separated the plastic part from the metal part by undoing ... Olympus FE-210 Digital Camera

Need a replacement USB cable ... do I need a 5-pin mini or 5-pin micro connector at camera end of cable


... Kodak EasyShare C330 Digital Camera

I have verified my Canon A95 drains batteries by doing an amperage test. Starting with new batteries I install them in the camera and then layer a thin copper wire then piece of paper then copper wire and close the battery door. Touching the wires together closes the circuit and the camera functions. With the wires appart I measure the camera amps. The camera measures 0.6 amps when on and 0.14 amps when off. Doing the same test with my A80 Canon yeilds 0.45 amos when on and zero amps when off. T


I assume you're using a CF type 1 card. Some CF cards have been known to drain batteries. As an experiment, remove the card and see if the batteries drain at the same rate. ... Canon PowerShot A95 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1700 seconds