Having problems with your Digital Cameras ?

Canon Zoom Lens ef 28-90mm 11:4-5.6 digital suddenly stopped working. It works on manual but not auto. It worked fine one day and then the next for no obvious reason it stopped working. Any suggestions?


Answers :

Does the lens have an aperture ring and is it set to "A"?
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Canon Zoom Lens ef 28-90mm 11:4-5.6 digital suddenly stopped working. It works on manual but not auto. It worked fine one day and then the next for no obvious reason it stopped working. Any suggestions?


Does the lens have an aperture ring and is it set to "A"? ... Digital Cameras

Hi I purchased Samsung HMX 200 and it was working fine. But one day it stop responding for the touch screen, thought the manual buttons are working and display is also working fine but the touch screen is not working. Could you please suggest what can be a problem and how should be resolved. Thanks


... Digital Cameras

Lens error I have a Canon Powershoot SD1000 and it was working fine until one day the lens stopped retracting. Now it doesn't retract and I get a Lens Error, Restart Camera message. I looked at other websites to get help and tried some of the ways they suggest to fix it. Not sure if its working, because it still gives the same message and makes a noise sounding like its trying to retract then gives me the Canon welcome picture. I've only had this for a little over a year and would like it to be


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon IXUS V2 Digital Camera

Flash I have a sony cybershot DSC-W50. Everything has been working fine until one day it stopped flashing. I have tried pressing the flash options button, but nothing happens. However, whenever I turn the camera on E:91:01 and a little squiggly arrow flash. Please help me! I have a Sony Cybershot DSC-S90 and the flash stopped working several months ago. Everything else works fine. Any solutions?


I think the firmware is corrupted ..... you must install new firmware ....just visit the nearby showroom or technician he will install the new firmware ..........for installing firmware it may costs some 300 to 400 bugs ....how eve ... Digital Cameras

Hi, my problem is the flash does not flash. The HS10 is a great camera, which I highly recommend and it does everything and more that I was hoping it would do. The flash worked great and then one day no mas. It just stopped. Any idea what the problem could be, suggestions or what I could try. One day to the next it quit working. Any help would be greatly appreciated. Thank you in advance. Don Bronsema


As I have suggested many times, try resetting all adjustments in the menus to factory specs., or what may also be called default settings, or something like that.Then test the camera again, making sure that the flash settings are set to be used ... FUJIFILM FinePix HS10 / HS11 Digital Camera

My camera worked fine one day, then it was in my purse. When I went to use it the light was on and the screen said there was a lens error. Everytime I try to turn it on now it makes a grinding noise and refuses to open and then closes completely with the lens error reading For no reason my camera (Nikon coolpix model S210) doesn't want to work with the term "Lens error" and lens won't come out WELL YESTERDAY MY NIKON COOLPIX s210 DIGITAL CAMERA WAS WORKING PERFECTLY FINE THEM I GOT UP TO TAKE P


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min. ... Nikon Coolpix S210 Digital Camera

My D70 (which I just bought on ebay) is having problems with AF. At time the AF works fine but then for no reason it refuses to work for hours to days. I have two bodies so I can swap lenses to see that its not the lens. If I switch to manual focus, it the camera works fine. I can see the little pins around the lens fitting retract when I switch the camera to manual. Seems like a problem with the internals that control AF. No other problems are apparent to me. Any suggestions?


Sounds like a contact issue - either they are not making consistently or they are just dirty. I'd start with a good contact cleaner (Radio Shack or photo store) and spray the snot out of both the camera contacts and lense (making VERY sure to protec ... Nikon D70s Digital Camera

I have a canon digital camera and its not old. One day for no reason it stopped working. i didnt drop it or anything. i know its not the battery because I switched the batteries with another camera my mom has and it works. I don't want to buy another one because I spent alot of money on the one I have.


Contact Canon and check on warranty. ... Digital Cameras

Hi, the camera worked fine for years and one day the camera stopped "seeing". The 1" screen works fine but the camera doesn't see light or the scene and will not capture images. It seems like it wants to work but doesn't. It acts like I left the lens cover on it. dave


This is the most common problem with digital cameras.\015\012The shutter is stuck in the closed position. This is most likely due to moisture residue built up over time on the shutter leafs. You will need to have the camera serviced to have eit ... Fuji FinePix S5000 Digital Camera

My Nikon S6000 was working fine one day and will not turn on the next. The battery is fine because I have two S6000's and it works in the other camera. No light comes on when I try to charge it. I have only had this camera about two months. Any suggestions?


... Nikon COOLPIX S6000 Digital Camera

My DSC-W7 was working fine the other day, it was just sitting on my counter one day and it wont come back on? any suggestions?


Check these:\012\012Batteries are fully charged\012Take the batteries out completely and reinsert them after a while\012Try new batteriesIf none of the abov ... Sony Cyber-shot DSC-W70 Digital Camera

3 beeps One day my camera was working fine. The next day, I tried to turn it on and the lens came out just a little and then it stopped and beeped three times. It now makes this noise everytime that I try to turn it on. It did this before when the lens was uneven. However, the lens appears to be in proper place so I don't understand why it is doing that.


After some attempts to turn on the camera following the instructions posted in this page, i just bang the camera when y press the start button, and the lens was released, and the camera start up with no problem :) ... Samsung Digimax D53 Digital Camera

Flash I have a sony cybershot DSC-W50. Everything has been working fine until one day it stopped flashing. I have tried pressing the flash options button, but nothing happens. However, whenever I turn the camera on E:91:01 and a little squiggly arrow flash. Please help me! i already try to reinitialize my camera but nothing happen. the flash still doesn't work. please help me. tnx


The flash circuit has gone out the squilling noise is the flash compasitor popped and the acid inside is burning. ... Sony Cyber-shot DSC-S700 Digital Camera

My camera worked fine one day, then it was in my purse. When I went to use it the light was on and the screen said there was a lens error. Everytime I try to turn it on now it makes a grinding noise and refuses to open and then closes completely with the lens error reading For no reason my camera (Nikon coolpix model S210) doesn't want to work with the term "Lens error" and lens won't come out


Hope you purchased an extended warranty. I've had two Cannon's with the dreaded lens error. Probably what happened was that while it was in your purse, somehow the power button got pressed. The camera powered up, tried to extend the lens, then str ... Nikon COOLPIX S200 Digital Camera

Hi there, I used my camera in sea for many times, always was working nice. But some days ago I went to sea and the camera stopped working the flash. I left overnight off and next day it was working normally again. Then when I went to sea again (always about 2 or 3 metres deep) and the camera simply stopped work. I opened the card and batterie compartment was dry and fine, when I opened the compartment where I use for connect the USB cable was very wet. I left the camera off for 3 days to dry and


It still amazes me how many people buy these cameras that are seemingly "waterproof" and eventually have the very same problems you are now having. The only true underwater camera is one in an underwater housing. ... Olympus ? 1030SW Digital Camera

Sony dsc-f828 does not turn on. It was working fine, one day I go to turn it on it starts it's normal little jingle when I start it, half way through stops, and hasn't turned on since, I've changed batteries, plugged it in...nothing-completely dead.


Does not turn on ... Sony Cyber-Shot DSC-F828 Digital Camera

My panasonic lumix dmc-fx3 camera does not turn on. it was working fine one day and then the next it just stopped turning on. Screen is black, lense doesn't come out. I thought it was that i'd ran out of battery but i'd charged it not long ago, anyway i charged the battery up again and it still won't turn on. Any idea what it could be? Thank you


Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Panasonic Lumix DMC-FX3 Digital Camera

I have a Kodak Z1015IS, about 16 months old, that has not been subject to any type of liquid or damage. One day I went to use it and I was not able to adjust any of the PASM settings (i.e. f-stop, shutter speed, etc.). All other hardware and menu systems work just fine, it is just that the settings are locked in place (at the levels of my prior use). I've tried updating the firmware, formatting the internal memory, and removing the battery with no luck. Just spent time with Kodak, and a


Kodak is right, they don't release any type of technical information about there products to the user, the only ones that can get parts or tech support are the repair centers, sorry but that is just the way they do things, this is not just Kodak it i ... Kodak EasyShare Z1015 IS Digital Camera

One day it was working and literally the next it stopped altogether. I changed the batteries and the memory card to no avail. Epson suggested a power failure but no solution. Can anybody help please


I'm afraid that it sounds like a fatal fault. I had one many years ago and enjoyed using it immensely. I seem to be saying this to a lot of people at the moment, but I think it's time for a new camera. I doubt that epson have any spares left to fix ... Epson PhotoPC 800 Digital Camera

Hello, while vacationing in Hawaii I my camera would not auto focus. I was using my 18-135 lens. It will go in and out of focus rapidly but never stop to focus. Upon my return home I tried another lens that I have and that one works fine so I know it's not the camera but the lens.any suggestions would be great


I do not think your lens is out of order.\015\012Sometimes this happens.\015\012If your lens is not out of order then lets think the problem is another thing according to the user.\015\012Autofocusing is great but under some conditi ... Nikon D80 Digital Camera with 18-135mm Lens

Sloooooowww speed I LOVED my 20D the first two years I had it. Then last spring it started slowing down - I was no longer able to fire off shots like before in multi-shot mode. Then one day it wouldn't stop clicking off shots. I turned it off, took the battery out and let it sit for a bit. Then it stopped working altogether and I got an error 99. It went into the shop and Ritz Camera said they fixed it - but they didn't. It worked one hour and did the same thing. I loaded a firmware update on it


Try cleaning your camera. ... Canon EOS 20Da Digital Camera

I have a Pelco Spectra mini in a warehouse, we replaced the previous camera with this new one but the PTZ function does not work. The old camera worked for while and stopped. We moved the new one to another location and the camera works fine. The power is local about 150 ft. on 16awg wire. The control is run via cat. 6 cable and is 1000 ft. long. It is wired to an amp that changes it to coax and feeds the DVR. There is repeater anRES MHUBX8 Hub 8 port repeater in line with one pair on it. It say


Hi. Did you call Pelco's customer support? They should be able to talk you through troubleshooting the camera to at least determine if this is a defective camera or not. ... Digital Cameras

I have 17 grand children and one great grandchild so about a year ago I bought a VuPoint DV-M5056-VP and have yet a picture. First was a day when it went blank. Took it to three Wal-Mart stores including the one I bought it from. No one could tell me what went wrong, Suggested I throw it away and get another type of camera. One day it worked. Now my problem is those metal pieces that hold the batteries are falling out. I lost one so the camera is again not useful. I need an answer sent to


Hi! I'm sorry but looks like that the camera is not durable. It will cost you to fix this that add few more dollars and you can have a new one. Hope this shed some light. ... VuPoint Digital Cameras

Won't work Have a C875 for a year now, and it has been working just fine. The other day I decided to try a AC adapter on it. Well, the AC adapter I used is one of those variable voltage ones. I set the voltage for 3 volts, plugged it in, it doesn't work. O.K. I put the batteries back in, still don't work. And, to top it off, the batteries get hot. Took the camera apart and I don't see anything burned up. Lost. Any help on what the solution could be and how to fix it would be greatly appreciated.


Oh no maybe you used different adaptor some adaptor have reverse polarity. check the adaptor before plugging it..if you using variable voltage set to 3v then adjust also the polarity. the polarity should match the polarity of your camera. ... Kodak EasyShare C875 Digital Camera

Memory card Our old memory card stopped working in the camera. It said "memory card error". I bought a new card, 8gb duracell sdhc card, and when I put it in it said"memory card error" again. I tried formatting the card but it would not allow me to. I put the card in my computer and the new one works fine. I gave the old card to my brother in law to look at it, but he is on vacation, so I can't test it in my computer. I put the card that came with the camera in and it works fine, but it is a mmc


Unfortunately, the A520 does not support SD memory cards with more than 2GB capacity, and doesn't support SDHC at all. (1GB max for MMC cards.) I know memory is much cheaper than when the camera first came out, but in 2005 2GB was about as large as y ... Canon PowerShot A520 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2971 seconds