Having problems with your Digital Cameras ?

Samsung scl901 8mm camcorder.. in camera mode screen shows "protection". switching tab on tape makes no difference.


Answers :

First of all try changing another tape.... since you say that you have already slid the tab to record but yet it still shows the same problem.... that makes me believe that the tape could be the culprit here but if you have already tried a different tape..... try putting a memory stick in and switch modes to memory card,\015\012then in the menu you maybe able to take the camera out of the\015\012protection mode. if the memory card mode too still gives you the same problem..... then there would be problem with the transport mechanism and it would need replacement


Regards
Iversh
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Samsung scl901 8mm camcorder.. in camera mode screen shows "protection". switching tab on tape makes no difference.


First of all try changing another tape.... since you say that you have already slid the tab to record but yet it still shows the same problem.... that makes me believe that the tape could be the culprit here but if you have already tried a different ... Digital Cameras

Jvc videocam gr dvl210. "unit in safeguard mode.removing/replacing batteries does not help. samsung 8mm camcorder scl901. shows "protection" in camera mode. priotection tab on tape has been moved in both directions.


Hi,Please elaborate your problem providing us with more details of the issue.Thanks for using FixYa. ... Digital Cameras

Lens stuck at extended position, screen shows FOCUS ERROR. Switching off and on again makes no difference. Is it a major problem, expensive to repair ? My model is fuji finepix S 3100, a 4MP digi camera. Thanks, Blasco


Have you tried using the Zoom control.  If the lens does not change its length (both focal and physical) then it looks like a lens problem.  Just make sure that you have the mode control set to the little camera (for pictures) before you sw ... Fuji Digital Cameras

Error #e21 I've got a kodak easyshare v610, which is RUBBISH!!!, but apart from that at least I was really looking forward to make some simple photos on it, but after half a year of using it ERROR E21 appeared on the screen! It's switching off or freezing and showing photos in many different colours saying "error e21" constantly! I don't have any warranty on it. What should I do? Chuck it away? I've paid for it £350 + SD memory card £50, I know, now new one is worth no more than £120...


Having had it for half a year - how come no warranty?\015\012If you acquired it through regular means and still have purchase documentation then back to the retailer it goes.\015\012The problems you mention are definite - firm ware errors and seller/ ... Kodak EasyShare DX7630 Digital Camera

My sony I just got a DSC-S40 from a friend. I actually swoped my previous camera for this one. When I switch it on, the lens seems to get stuck and not come out all the way. I makes a grinding noise and does not show any picture on the screen. The flash goes off when I push the button, and the little guide dots on the lcd screen shows, but the the screen stays black. I am able to view the photo's that are on the camera taken before this problem, but am unable to take any photo's now. The shutter


I can fix your camera, it is not an easy thing to post because the post would be forever long....$20 and it would be good as new. ... Sony Cyber-Shot DSC-S40 Digital Camera

I have checked the battery and the back up battery are working properly, and have loaded a tape properly, but when I switch on my camcorder ( Canon MV630i ) I get a dark screen with the time and date e.t.c. showing. My camcorder will not play a tape on the L.C.D. screen either.


May be u can try to use a Camcorder Tape Cleaner disk and Chk ... Canon Digital Cameras

My Canon A95 has horizontal grid lines on the lcd screen after a photo is taken. The view on the screen is normal when you are framing the photo but after you take the shot the playback of that scene has these grayish horizontal lines and the image color is washed out. Changing the batteries and the cf card makes no difference and loading the photos on Adobe Photoshop shows the same problem on the computer screen. This just started yesterday after we downloaded a bunch of photos from the camera


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free worldwide, and may also include free shipping both ways (free shipping varies with countries). This is regardless of your camera's warranty status. ... Canon PowerShot A95 Digital Camera

My Canon A95 has horizontal grid lines on the LCD screen AFTER a photo is taken. The view on the screen is normal when you are framing the photo, but AFTER you take the shot, the playback of that scene has these grayish horizontal lines and the image color is washed out. Changing the batteries and the CF card makes no difference, and loading the photos on Adobe Photoshop shows the same problem on the computer screen. This just started yesterday after we downloaded a bunch of photos from the came


If the menus and icons look normal, but images are distorted or discolored, you may have an image sensor (CCD) problem. See Canon's service notice regarding this issue ... Canon PowerShot A95 Digital Camera

Focus camera will not focus, even sight screen is out of focus The camera will not focus. When switched on it beeps with a flashing green light near rthe view-finder and the lens housing extends. This repeats and the then the viewing screen goes blank. Pressing the AEL button will illuminate the viewing screen, but it is out of focus. Half depression of the shutter makes no difference. I had previously some intermittent operation of the zoom mechanism. The camera has not been dropped or jarred.


Your camera is having a problem positioning the lens unit, more than likely the cause is grit/dirt in mechanism, I recommend that you take the camera to a autorised service agent to have it stripped, cleaned and rebuilt. This is not really a repair t ... Olympus Camedia C-5060 Wide Zoom Digital Camera

Where is that switch to reset on the memory card protection? Whgen I try to take new picture the screen shows as follows:reset switch on memory card, where is that switch?


On the card itself (the tiny slide switch on its side). There are several possible causes for "memory card locked", "memory card error", or "no memory card". Some include trying to use of a 4GB SDHC card with an older camera made before SDHC format ... Kodak EasyShare V1073 Digital Camera

Camera keeps showing disk protect, i tried different disk, and i have moved the protect tab from all. help


The disk protect switch inside the floppy drive is stuck or bad. ... Sony Mavica MVC-FD71 Digital Camera

Write protect Use camers a to take a few pictures. Tried to print through a different computer. Now when I turn cmera on it shows a blue screen with "[xD] write protect". I also do not find the DCIM folder. Consequently I can not download pictures - Any Help Out there?


When you disconnected the camera, did you use the "safely remove hardware" icon at the bottom of your computer screen? ... Olympus FE-210 Digital Camera

I have a Sony DSC-H1 camera and have recently removed photos from it's memory card - the same way that I've always done it before without any troubles. Now, when I put in the memory stick and turn on the camera, the screen shows "no file in this folder" and won't go any further. I've tried to go through the menu and reformat the memory stick but it didn't make any difference. What do I need to do to continue to use this memory stick?


If you have a card reader/writer in your computer, you can put it in there and try and format it, using Fat 16. If it won'd show up there, then your memory stick is faulty and will need to be replaced. If it does show up and you are able to format ... Digital Cameras

Memory Card I just got my new Canon Power Shot G9. The user guide pictures a different memory card then what came with the camera. The guide shows a memory card that has ribbing and a write protection tab. The memory card that came with the camera does not. It is smooth all around except for one squared off corner. My problem is I cannot figure out, since the guide diagram and the actual card do not match, how the card is inserted into the camera? Please help! Thanks, Liz


They tricked you. The picture in the guide is of an SD card, but the card that came with the G9 is an MMC card. On both, there is a row of brass-colored contacts along one edge. This is what looks like ribbing in the guide. These contacts should go i ... Canon PowerShot G9 Digital Camera

Hi.my daughter's Panasonic DMC-FZ7 has gone dark through the view-finder, and all the photos and videos that she tries to shoot are likewise totally black. While photographing yesterday, she paused to gently clean the lens. All photos since then have been black. The camera records taking a photo but shows a black screen on play-back.Changing to a fresh battery makes no difference, neither does using a flash. Can you give any guidance about what is likely to be the problem, and what we should do


Hi,There are two possible reasons for that problem, either aperture got stuck OR ccd imager chip is bad.You can check aperture function easily, turn On camera while looking closely in lens, please observe aperture should open like an Eye, ... Panasonic Lumix DMC-FZ7 Digital Camera

Memory card is protected (reset switch on memory card) Go to Review That is what it shows on my CD82 screen...when I go to review it gives me choices like Select Photo, Tag, View thumbnail.


Move the slide switch on the side of the card. ... Kodak EasyShare One Digital Camera

Canon A510 Powershot camera will not stay powered on when I turn it on in picture-review mode. It comes on for a second --> Canon screen flashes on -- and then shuts off. In picture-taking mode, it seems to be fine. It stays on. But if I switch to review mode, it turns off. I've changed the batteries. It was fine last time I used it, last week. I left it plugged into the PC for a few days, if that makes any difference.


These cameras have capacitors built into the circuitry. A capacitor holds a higher voltage so the camera will operate when in use. Some modes in these cameras do need a higher voltage to work. The capacitor for the review mode is weak and will need t ... Digital Cameras

Green light on camera back to the right of the 'delete' button continually flashes on-off about 1 second intervals as soon as battery is inserted as long as CF card is in place. Switching camera ON produces no visible operational indicators. Depressing "Menu" button flashes: hour glass; menu display; blank screen. Holding button down just cycles as above. Swapped lens, data card, battery, connected EH-5 power source; nothing makes any difference. Checked same lens in another D70 camera; it's OK.


I would start by looking into the memory card slot to see if you have a bent pin. You may need a small light and a magnifying glass to see them. If the pins are okay, then you can try a reset by holding down the BKT and metering buttons toget ... Nikon D70s Digital Camera with 18-200mm lens

My Nikon D70 DSLR was fine when last used but after around three weeks when brought out to use again, the LED which signifies writing to the card is flashing - whether the power is on or off. Removing the CF card and reinserting it makes no difference. While this light is flashing the camera will not switch on or show any information in the LCD. It is about three years old and has been faultless until now. Any suggestions?


... Digital Cameras

The camera is locked and i'm unable to make video or take pictures. The screen shows me "write protect"


This issue occurs due to the memory card corrupted and the only way to remove the write protect is to format the memory card when it is in the camera(this will remove all the data/pic of the memory card). To format the memory card:Press the gre ... Olympus Stylus 1020 / µ[mju:]1020 Digital Camera

Sony DSC-R1 N50 MKM 4552350 Upon switch the camera makes a crackling noise and the LCD screen as well as the view finder has noise bars. The noise bars are like vertical confetti bars about 5mm wide and almost full height, and there is about three of them. Pressing the menu button shows the menu clearly but upon playing back photos from CF Memory card or Memory stick the camera turn's it's self off. The crackling noise is usually present only for about the first few few seconds. H


... Sony Cyber-Shot DSC-R1 Digital Camera

The LCD monitor on my SD 200 is not functioning. When the camera is turned on the screen is bright amd shows vertical colored lines in the bottom left corner, a grey blue patch in the top left and a purple blob in the top right. It is the same with the card in or out and none of the function keys make any difference.


Sounds like a cracked LCD screen. You may be able to fix it if you can find a replacement screen. I usually search ebay for a broken camera with other problems that I can cannibalize. Here's some examples on LCD replacement, including one for your ... Canon Digital Cameras

Please help my Olympus Stylus Tough 6020 seems to be stuck in playback mode. I can review the photos no problem but when I press the button to change the mode to take aphoto the screen reverts back to showing me that the battery is fully charged. I have remvoed and reinserted the battery several times, doesn't seem to make a difference.


Unfortunatly the Olympus 6020 does not hav a dedicated hardreset switch, nor a key sequence to initiate reset. So if you cant get into the camera menu, and reset the camera from there. Or if that does not work. The camera has to be serviced by proffe ... Olympus Stylus Tough 6020 / mju Tough6020 Digital Camera

Attention Fixya site I have a Canon Camcorder 750i Unit does not display in record mode either with screen closed for eye piece vision or screen vision fully open. This applies to either when record or pause are envoked. In a playback mode displays show a blue screen for an unrecorded area of a tape and change to a dark grey screen when it reaches a recorded section same as what was displayed shows whilst recording. Pre-recorded tapes when camcorder did not have the problem can be


Symptoms in your Canon camera shows problem with CCD Image Sensor. Can ... Digital Cameras

I have a Canon XM3 camcorder. It has given me many years of good service. Recently it has developed a fault. When I switch it onto Camera mode, and then flip the switch to Standby, the small screen flickers blue for a short time, but it does not show the image from the lens. If I switch off, and sitch to Playback, the small screen works OK and all the Playback works fine. Sometimes when I switch to Camera, and Standby, the small screen flickers blue, and then an image from the lens appears, but


Its the problem of CCD assembly\015\012CCD (image sensor) failures, particularly in conditions of high heat and humidity, led to cameras capturing images with either no picture at all, or with extreme distortion and se ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4358 seconds