Having problems with your Digital Cameras ?

Hi, after switching off the cam, I get a message saying ''lens error''. When I turn on I also hear strange ''bzz'' from the lens. How can I solve it? I've tried turn off and remove the battery but the problem remains ... What can I do? What is the problem? Thanks Carla

Answers :

Fixing a Lens Error on a Digital Camera
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi, after switching off the cam, I get a message saying ''lens error''. When I turn on I also hear strange ''bzz'' from the lens. How can I solve it? I've tried turn off and remove the battery but the problem remains ... What can I do? What is the problem? Thanks Carla

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Digital Cameras

My CANON Powershot A470 is giving me the following error message: lens error, restart camera. Ive tried multiple times. I turned it off for a few minutes, nothing happened. I removed the batteries and memory card for a few minutes, nothing happened. I shook it easily...nothing happened. I vacuumed the lens and tapped the lens...still nothing.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot A470 Digital Camera

Error message my nikon D -80 is flahing an error message. When i try to take a photograph i hear it cycle, but nothing is taken. The automatic focus does not work. I think i might have turned the camera off by accident while it was writing a photo to my card *sighs* I have tried removing the battery, a new card, remove and replace the lens, remove lens and clean contact, and talking very sweetly to the camrea. Nothing worked and the same messages is displayed when i turn the camera on. Any advic

This may be due to the aperture ring in your lens. Try the following:\015\012\015\0121. Turn off your camera\015\0122. Move the aperture ring clockwise then lock\015\0123. Turn on your camera and try again.\015\012 ... Nikon D80 Digital Camera with 18-135mm Lens

Lens Error I purchased a Nikon P90 a month ago; and it was working just fine. A couple of days ago during a photo shoot (after taking 190+ photos without any trouble), the camera went crazy.. It shows a lens error when turned on; asks to 'remove the lens cap' even if it is already removed. The lens starts to zoom out & in for a couple of times; then this error message comes up and just hangs. Tried removing the card, battery and even tried re-charging the cell. I purchased it from UK, and I'm n

This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Nikon COOLPIX P90 Digital Camera

I am able to transfer images to my computer, but when I try to turn the M893 camera on when it's not connected to my laptop, the screen comes on for a second or two, lens comes out, green light is on and then blinks and turns red and blinks and then lens goes back in and camera turns off. I've tried removing the battery, wiping it off, putting it back in, camera also wont charge. It's never gotten wet or been exposed to extreme heat

It has problem on the lens. Lens doesn't extend when transferring pictures that's why it works. Kodak cameras are designed to automatically shut-off when the lens is struggling to go in or out.Follow step-by-step solution and repair on ww ... Kodak Easyshare M893 Digital Camera

Samsung L730 My camera appears to be stuck. The lens usually pops out when it is turned on. However, when I turned it off today, it remained out. I tried removing the memory card and battery. Also, it won't turn off unless I remove the battery. When it is on, the screen is black and the usual green light goes off after initially pressing the power button. Is there a way to reset it?

This camera would have to be tested more, but it sounds like a ccd or sensor problem. If this camera was made around the year 2000 or after a bit, then it could be a ccd problem common with many Sony made ccds in this period.A loose conne ... Samsung Digimax L730 Digital Camera

When I tried to turn on my Canon Powershot (SD880 IS) this evening the lens extended only about half way and the screen remained blank. When I tried to turn it off the lens did not retract fully, and the screen is still blank. I have tried removing and recharging the battery, but it makes no difference. Any suggestions are welcome.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon Digital Cameras

Hi, my camera (finepix Z20)won't turn on properly, ive only had it for two years but suddenly when i slide the lens cover to turn it on the green light appears but the screen does not. the battery is fully charged and i have even tried warming the battery. i can't think of anything that could have stopped it working either, also when i close the lens cover sometimes the green light won't turn on...

... Fuji Finepix Z20fd Digital Camera

My L730 was knocked off the table and seems to have now jammed, when I turn it on it makes 3 loud beeps then the screen goes blank. The power light stays on but it doesn't seem to be attempting to do anything. The lens is still out. I've tried removing the battery and waiting before replacing it then turning it back on and I've also tried gently manually moving the lens but the problem persists. Very Infuriating as I recommended this camera to others, 2 of which have bought one since !! Can anyb

Hello.Your brand of camera has very little to do with your problem. This has to be one of the top digital camera problems of all time. There is a very good solution here on fixya click the link below.And please give the author thumbs up,he's explaine ... Samsung Digimax L730 Digital Camera

Camera was on, working fine. When powering off, telescoping lens did not retract so lens remained extended just a bit with lens cover open. Waited a few minutes, turned it back on and I get the "access" display message then the beeps and (turn power off and back on) message. While off, I have removed the battery, replacing it with a fully charged spare and it still does this. The lens tries to telescope a little bit and retracts a touch, but I can't get the camera out of this mode. Can it be res

Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Sony Cyber-shot DSC-W55 Digital Camera

Vivitar 5386 turning the camera on, i get a "lens error" sign, and then the lens will go back in (after being 1/4 of an inch out) and the camera will shut itself off, how do i fix the lens?? ive tried air into the lens, and different batteries, and i tried opening the caemra up, but i couldnt get off the last screw, so i dont know what to do

I suggest that you take your camera to a profesional camera shop, like Jessops, and see what they say. if they cannot fix it then just buy a new camera. ... Vivitar ViviCam 4345 Digital Camera

I have the Poloaroid i1437 digital camera. The lens appears to be jammed in closed position. I have tried several different techniques to try to allow it to operate properly with no luck. When I power the camera "on", the lens tries to turn and then begins clicking repeatedly until I remove the batteries.

The lens assembly is jammed or defective. Check to see if the camera is still under warranty, if not your best bet is to buy a new one - repairing these devices is difficult. ... Polaroid i1437 Digital Camera

When i try to turn my camera on it says "lens error, restart camera" but when i try to restart the camera it just repeats the error message. Ive plugged the camera into the computer, I've tried taking out the battery and memory card nothing changes. the lens will not extend or open"

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon PowerShot SD1100 IS Digital Camera

Lens issue A black screen comes up with the word access. The lens seems like it is trying to fix itself but is jammed. After a few tries the screen says: Turn the power off and on again. I have done that and tried removing the battery for a period of time and recharging it but nothing seems to have an effect. Thank you in advance for your help.

This is either a faulty lens mechanism caused by dirt ingress or damage, thus not able to complete the process- Contact Sony for repair erstimate. ... Sony Cyber-shot DSC-W50 Digital Camera

Hi. Last 2 weeks when i was trying to zoom to take a picture suddenly the lens stuck and my camera automatically turn off without a warning. My cam still got 1 bar battery but failed to turn on. So i thought maybe the battery need to be recharge however after recharging it my cam still cannot be turn on. Plzz help me.. Do anyone here face the same or similar problem like me? how to solve it?.. Nurnaz.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-FZ28 Digital Camera

Frozen camera Ive had my camera for about 6 months its a Samsung s500 and when i go to turn it on the lens wont pop out nad its liek frozen. The little green light stays thier and the screen is black, and eventually liek 2 hours later the screen turns on but u cant take pictures but you cna review your already takesn ones. Ive tried new batteries, it doesnt work. What should i do?

Your lense is jammed try to put your finger in it and close the lense all the way it might me like hardly closed, i had that problem and now my is open all the way so i cant close it yuo can email me at [email protected] or im makaluso06 ... Samsung Digimax S500 Digital Camera

On/Off Switch Hi My problem with the 5050Z is as follows; When I switch the camera on the lens extends and then retracts but not always. This can carry on until I turn it off. On the odd occasion that this does not happen, should I lightly touch the on/off switch (but not move it) the lens begins to retract and extend again until I turn it off. Has anyone experienced this problem, if so, is there a solution? I've tried removing the batteries for 24 hours to force the camera to fully res

I too have experienced the same situation .... I have THREE C-5050's and "REGULAR" part seems to occure when the camera is overworked, or WARM. Does your camera become warmer is you are shooting many picturees one after the other? When it cools down ... Olympus Camedia C-5050 Zoom Digital Camera

Unit Model: Canon Powershot A2200 Problem: Battery drains without retracting the lens. at power on: LCD says error lens, will shut down automatically, resart camera. how to restart this camera? ive already removed the battery & turned on off several times...

I suggest check in this link, some tips about fixing-lens-error-on-digital-camera.Hope helps. ... Canon A2200 Digital Camera

Samsung digimax s1000 turned on before, lens came out then shut off.power light blinks when you try to turn it on. but will not turn back on. lights up only when button pressed. tried different batteries. Using N-Mi Rechargeable batteries. Tried with sd card Worked fine the day before. But, it looks like the lens did not come all the way out and the first lens is at an angle to the second. Gears stuck maybe? Don't remember interfering with the lens when it was turned on. If it's the gears being

Follow this link and i would try step 8 and/or step 9http://www.wikihow.com/Repair-Lens-Problems-on-Your-Digital-CameraI am a ... Samsung Digimax S1000 Digital Camera

Lens error, restart cameraI turn on my camera, and I get an error message stating Lens error, restart camera, the lens is open and will not retract, I have removed the battery and tried to restart. It will not go beyond the lens error message

This is probably THE most common problem with digital cameras. Try these procedures. ... Canon PowerShot SD850 IS Digital Camera

Lens error, restart cameraI turn on my camera, and I get an error message stating Lens error, restart camera, the lens is open and will not retract, I have removed the battery and tried to restart. It will not go beyond the lens error message

Try these procedures. ... Canon PowerShot SD850 IS Digital Camera

Lens error Hello, my son has a Nikon Coolpix L11 camera. Today he took it to school for the last day of class to get pictures of his friend. He says that when he took the camera out of his pocket, he noticed that the lens was half extended and open. When he turns the camera on, the lens assemply does nothing and the lcd displays a lens error. We have attempted removing the batteries and even trying fresh ones, but to no avail. I'm leary to open the camera without knowing first what I need to

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Nikon Coolpix L11 Digital Camera

Lens problem turns on ok then lens goes out and in and out and in seeking focus it appears, then stops and screen says lens problem. it will then not do anything until shut off and on then it repeats the same thing. tried removing battery and putting it back, but no luck.

Try the procedures in this tip. ... Nikon COOLPIX L18 Digital Camera

Stuck :( my kodak easyshare DX6440 is stuck. The lens wont retract and whenever i turn it on, the little green light flashes, but then makes a few buzzing noises and turns red. Ive tried new batteries, but it still wont work... what should i do?

I concur. The camera will be "beyond economical repair," and the 10% offer does little for customer loyalty. ... Kodak EasyShare DX6440 Digital Camera

Color problem The same issue as the one who asked about the color problem. We bought this Olympus FE-280 Digital Camera March 2008 i think. It started to have this color problem last month which is April. The problem is whenever I turn on the camera the screen has this red violet color and it doesn't capture good photos. What do you think is the problem? How can I solve this? I already tried removing the battery and the memory card and tried changing the settings but still it never changes. Help

Try to see if a filter is activated like magenta ...look in the menu if there is a reset settings feature...Usually it is in the main menu..one that reset it to the factory settings ..there can not be any other thing but something from the settings a ... Olympus FE-280 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3952 seconds