Having problems with your Digital Cameras ?

I have a Kodak DX3600 Zoom Digital Camera. I purchase around 2001. It has a docking station. I have had no problems with it until I thought I was updating the program with apparently something that was too big for my system. I have NO IDEA what I did. I think I tried to download an update version to what I have and my system was too small for the download. I'm not certain of that either. All I know I did something that has totally screwed up my access to the program. I don't know where t


Answers :

Have you tryed removing the memory card from the camera and putting it into a card reader and plugging it into your computer via the USB port.
\015\012Then follow the on screen prompts to download your pictures onto the computer and into your MY PICTURES file. With this you dont have to use the Kodak program at all and still be able to view and use the pictures. If you have not got a card reader, they are readly available on the market but you will need to know what type it is i.e. SD, XD and so on. Good luck.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Kodak DX3600 Zoom Digital Camera. I purchase around 2001. It has a docking station. I have had no problems with it until I thought I was updating the program with apparently something that was too big for my system. I have NO IDEA what I did. I think I tried to download an update version to what I have and my system was too small for the download. I'm not certain of that either. All I know I did something that has totally screwed up my access to the program. I don't know where t


Have you tryed removing the memory card from the camera and putting it into a card reader and plugging it into your computer via the USB port.\015\012Then follow the on screen prompts to download your pictures onto the computer and into your MY ... Digital Cameras

I am trying to install the software that came with the camera (~ 3years ago) onto a relatively new PC with XP Professional. I get the message : "setup has detected that the service pack version of the system installed is newer than the update you are applying to it". Can I get an updated version of the Nikon software?


Did a search via Google on "free software for the Coolpix 2500 digital camera". Downloaded the software. Works just fine. ... Nikon Coolpix 2500 Digital Camera

I got the same problem with Windows 7 I connect my camera, but the devce manager doesn't recognize correctly. I try to update the WIA Driver to version 6.0 (for Vista System) and got the same message "You cannot install EOS USB WIA Driver on this computer. Verify whether the required environment for use has been satisfied. Cancel Installation" How can a get a version of the drivers that' ok for Win 7??


Please get it downloaded here:\012www.driverslab.com/drivers/Camera/Canon/16/22.html\012\012 ... Canon Rebel XT / EOS 350D Digital Camera

Owner's Manual I can not get the owner's manual to work. I can not find it online and the camera is not much good with out the manual. If you know how to get one please let me know. I have the CD that came with the camera but everytime I try to use it I have to purchase something on the internet and I don't think I should have to do this. I am very frustrated.


You can download owner's manual of Finepix S1000FD, click Fuji Support. ... Fuji FinePix S1000FD Digital Camera

Sony dsc-t100 Tried to update to firmware version 2. Camera tries to "Updating Dont turn off". Eventually goes to "Error 10". I can't press anything except round Select button which restarts the updating process again and eventually error message again. I can't find the original firmware anywhere on the web. Only version 2. I believe finding a firmware other than version 2 may solve this problem. Also tried resetting camera. It always goes to same process described above, once the battery is put


Please open the page by clicking the link provided below.http://esupport.sony.com/US/perl/swu-download.pl?m ... Sony Cyber-shot DSC-W80 Digital Camera

I have Olympus t 100 and try update firmware version 1.2, something go wrong. Now my camera not working. Only litle orange light right side on lcd-screen is active (all the time when power is turn on)...:( What i can do??? How i can install new firmware?


Hi,\015\012\015\012It seems that the latest Camera Firmware upgrade available for the T100 is Ver1.2. The previous version was Ver 1.1. \015\012\015\012You can download the newest firmware to your camera through the Internet. ... Olympus T100 Digital Camera

Nikon Thanks, Ekse - I tried the reset function - nothing happens. I also opened a brand new memory card; put it in (unlocked..) - and got the same message. Start to think that there is something wrong with the camera...I have a Mac - I don't know how I can reset the card - I do not have any appropriate slots.


Ok, take the camera to nikon for service, do you have warranty on it?\015\012\015\012Or you can take it to a local camera shop they can look at it or direct you to someone. ... Nikon Coolpix S51c Digital Camera

I have Olympus t 100 and try update firmware version 1.2, something go wrong. Now my camera not working. Only litle orange light right side on lcd-screen is active (all the time when power is turn on)...:( What i can do???


... Olympus T100 Digital Camera

I have a Nikon S220 and am using an Ibook G4 running on OS x 10.4.11. I use iphoto 6.0.6 to import photos into my photo library, but today I plugged in my camera through USB, and iphoto popped up, but didn't show that S220 was plugged in or that there were pictures to import. I have tried continously to import my photos, and I know that it is not the USB port on my computer because it recognized my external hard drive, ipod, and USB drive. I tried updating iphoto, and there are no updates for


Based on your statement, the problem is isolated in the memory card of your Nikon S220. 1. The fact that the iPhoto popped-up after connecting the S220, meaning that the camera was detected and the USB cable is working.But tha ... Nikon Digital Cameras

Dead program my camera keeps comming up with an error and i know how to fix it but can't. when i go to the menue and scroll down to steeing 2 to update the version, it doesn't say version where it should. does anyone know what to do or has anyone had this problem?


Mine says CONversion, what version are you trying to set? ... Sony Cyber-shot DSC-H2 Digital Camera

Hello people im trying to get into my daughters DMB fs7. i'v got the sides - the back off - but i'm trying to get to the lense. it wont open or close properly. i want to know why - think it has been dropped by little sister. does the outer face ring 'screw' off? my daughter also has a dmc-fh1 with a broken screen!! are the lenses inter changeable? Can one buy a screen to replace the busted one? I think it is a waste to through these out and buy another!!!! Help? Mark Phelan


Hi Mark....I'll tell you what I've figured out on this type of digital camera, and perhaps it will give you something to go on. First of all, when a digital camera with a zoom lens is dropped with the lens extended, damage to the tiny gears inside ... Digital Cameras

Downloading Pics I'm having the same problem...all of my pics downloaded just fine the first time. Now when I try downloading I keep getting "No camera found" error box even though I know it's there. I've tried everything except uninstalling and reinstalling ZoomBrowser Ex because I don't know if I would lose my pictures. Did you ever find a solution to the problem? I think it's a software problem because it's mentioned in their troubleshooting user guide. but they don't really give a sure fix.


I am having the same problem & can't figure out the solution \015\[email protected] ... Canon PowerShot A80 Digital Camera

I mistakenly dropped my digital camera a few inches when the lens was out.When i tried putting it off to know if the lens would go back in,it didnt move so i forcefully pushed it back inside.Now, when i try putting it on ,the green light flashes,then goes off and the lens attempts to come out but its like its stuck or something pulls it back inside.from what i noticed the camera cant come on without the lens coming out.pls i really dnt know what to do


You've likely jammed the zoom motor in the lens. You're correct in thinking that the camera can't work without the lens out. With it being physical damage repairs wouldn't be covered under warranty so you either need to pay to have it repaired (if th ... Digital Cameras

Firmware updates I currently have firmware v1.2 and i think its in need of an update. Does anyone know where I can get the firmware updates? I looked all over www.nikon.com and couldn't find it. They don't even have the camera listed! www.download.com doesnt have it either


Current firmware revisions for all Nikon products can be found athttp://nikonusa.com/Service-And-Support/index.pageClick on "Niko ... Digital Cameras

I'm no longer able to download images from my IXUS 75 camera to the computer. While trying I'm getting the message "cannot detect camera. Check the connection and try again." I have tried uninstalling the Cannon software and installed an updated version as suggested by Cannon, but without success. Everything worked find up until this summer. My computer is applying Windows Vista.


Even without the software, you can still download your image files from the camera to the computer. While the camera is plugged into the computer thru the usb cable, turn on your camera from there. Right click on the Windows Start button and choose ... Canon PowerShot SD750 / IXUS 75 Digital Camera

I have a Nikon D80. Whilst at Yosemite National Park a few weeks ago, where it was extremely cold I noticed that my camera would not take photo. After a few tries, it started working fine again. However, yesterday the shutter started sticking, and the ERR message showed on the screen. Then I can take one photo, and same thing happens again. Is there something I can do with settings, or do you think there may be something wrong with the camera body? I took to a camera shop and they say the


Changes in temperature should not affect it unless its about 15 below or at above 55-60C Then there is some delay in taking the picture due to shrinkage in metal part causing lt to be sluggish or in heat to expand the metal and cause some slight ... Nikon D80 Digital Camera with 18-135mm Lens

Trouble Connecting I went to upload my pictures onto my MacBook and the camera won't connect. It had been working fine before and I hadn't changed anything. I tried taking out batteries and memory card, switching USB ports, and making sure the camera was set on USB and not the disk setting. What else can I try?I feel like I had this problem before and maybe it had something to do with Rosetta on Macs...could that be it? But I don't know how/where/what to do for that.Thank you,Tia


Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer ... HP Photosmart M425 Digital Camera

My camera won't turn on but it'll let me view all my pictures just fine. I think their might be a problem with the shutter because it sticks out a bit. When I try to turn my camera on it'll show the FujiFilm Welcome Screen and then just go to a black screen. If there is anyone who knows how to fix this without taking it to get fixed professionally please tell me, i would be very grateful of that! If not, and you know where they can fix it (other then sending it back to the company) please inform


This is a very common problem. It may need firmware upgraded. The manufacture will do it for $50 or you may be able to find a software update on the web. ... Canon PowerShot A620 Digital Camera

Missing peice i am trying to find a peice for my camera i dont know wat its called but i think its the battery cap or battery cover and i dont know where to get it what is it called and where can i get it at?


There are no user-serviceable parts on your camera.\015\012The part you need can only be aquired and installed by a professional. You can find a service center at www.canonusa.c ... Canon Elph 240 APS Point and Shoot Camera

I have a sony cybershot DSC-H10 and it has worked great for the last 2 years, BUT i recently tried to upload pictures onto my computer and the screen displayed USB MODE MASS STORAGE MEMORY STICK. So, i deleted a bunch of useless pictures (over 100) thinking that the memory stick was too full or something, but it still says this screen when i try to upload. What gives?


Use a card reader instead of your camera and you will not have this problem. ... Sony Cyber-shot DSC-H10 Digital Camera

PC Mode I have one that for 2 secs maybe, I can see something I could take a picture of.  Problem is that on second 3 the camera screen has switched to saying PC Mode, even though it is most definitely not attached to the computer.  I have tried removing the battery and the cards and putting them back in, and still only get PC Mode.  Someone said something on another board about possibly a reset button, but I don't know if the sony dsc-s50 has one.  Has anybody else had a similar problem, or doe


Err 16/60 ... Sony Cyber-Shot DSC-S50 Digital Camera

My Kodak EasyShare M753 wont turn on at all, but when i tried charging it, it still wouldnt turn on. I have tried lots of different charging methods, like my USD port that came with the camera and my printing docking system and it still dosn't work. I have thought about buying a new battery do you think that this will solve the problem and get my camera working again.


This problem is frequently due to corroded battery terminals inside the\015\012camera. Before you purchase new batteries, remove the batteries and wipe the terminals with a soft cloth\015\012(heavy corrosion may require a fine wire brush, steel wool ... Kodak Easyshare M753 Digital Camera

Slider Prob I've had my S30 for quite a while and lately i've had some problem with the slider opening up. Dont know if something got in between the slider and the cam or something. Anyway with some trouble i could still open up the slider and thus start up my cam but then one day when i was trying to close my cam i started to slide it to close. Finally it closed and i slided the slider onto the lens but then the lens started to open up again. But the slider was in the way so the lens opened up


Dang, what a weird design. The lens needs to go threw a cycle before it can reach the idle position where it waits for a comand from the user. If its in the closed position and you turn it on it extends to its full range then stops at the idle positi ... Canon PowerShot S30 Digital Camera

My counsin threw the camera and something inside broke but i dont know what it is i try to open the camers to see but i dont know please help me


These cameras will not tolerate such treatment, cousin needs to buy you a new camera. ... Digital Cameras

Grainy pictures Lately my camera's pictures are very grainy and blured. I think I have accidentally ajusted something wrong, and I know little about cameras. Aperature or shutter speed or something???


Grainy pictures are possibly casued by a very high ISO (sensativity) setting, you should be on 100 or lower for best normal shots. Higher settings are for low light and custom shooting in strange lighting or aperature/shutter speeds. Try full auto se ... Canon PowerShot S3 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2832 seconds