Having problems with your Digital Cameras ?

I just read how to fix the led display on Sony's UVW-1800 betasp deck... it seems simple after pulling the front cover all I have to do is pull out the 2 flat ribbon cables above the display and it will come out... but my machine... the display is soldered into the board... about 50-pins worth... is there something I am missing here?


Answers :

If 50 pins are soldered into the board, then they changed something about its manufacturing between the time the UVW-1800 betasp deck was made and the repair information was published.
\015\012
\015\012It's not uncommon for consumer electronic devices to change their manufacturing techniques midstream.
\015\012
\015\012I checked sonyusa.com and the product's literature and support was unlisted there.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I just read how to fix the led display on Sony's UVW-1800 betasp deck... it seems simple after pulling the front cover all I have to do is pull out the 2 flat ribbon cables above the display and it will come out... but my machine... the display is soldered into the board... about 50-pins worth... is there something I am missing here?


If 50 pins are soldered into the board, then they changed something about its manufacturing between the time the UVW-1800 betasp deck was made and the repair information was published. \015\012\015\012It's not uncommon for consumer electr ... Digital Cameras

FZ-30 LCD flat ribbon cable broken


Hi,Part No is VYQ3473. You can order it directly from Panasonic. It will cost you 29 USD without taxes.Jimi ... Panasonic Lumix DMC-FZ30 Digital Camera

I've just bought a vistaquest FS-501 Scanner. I don't have an sd card for it. I've plugged it into my xp pc (using the usb cable supplied) after installing the driver. Now the led light comes on when I open the cover but when I insert some film into the scanner no image is displayed on the screen. Does it have to have an sd card in it to make it work?the screen does work when it's first turned on but then goes off and it does matter which buttons I press it won't display the images???


Tweak the USB cable at the back socket of the box...there's a certain point where the cable will actually work and then you will have an image on the screen...sort of not quite completely fully in to the socket.you're meant to be able to ... Digital Cameras

I was pleased to read your account of replacing the LED display's flex circuit/connectors in the SONY DCR-HC30 camcorder. While I can find the ribbon cable on-line (and locally), What I really need is instructions on disassembly and re-assembly of that portion of the camera allowing replacement of the cable. Can you point me to such documentation? Thanks Cliff


Http://www.gadgettown.com/LCD-Fle-Cable-Sony-DCR-HC20-HC30-HC40-D00076.htmlfor replacing it you have to open the main body ... Digital Cameras

Kodak M1093 The lens is stuck open and it will not power on. Blue power light comes on. There is no display. Battery is fully charged. I removed battery and SD card and pushed power button twice. Used on USB cable for power. Tried a different SD card. Same results. (lens is stuck open and it will not power on)


... Kodak EasyShare M1093 IS Digital Camera

Is there a way to replace lcd screen's ribbon cable latch?


... Nikon Coolpix S210 Digital Camera

FZ28, backlit ribbon cable broken


... Panasonic Lumix DMC-FZ28 Digital Camera

When I turn on my camera to take a picture the display screen is completely black. If I try and take a picture nothing comes out. The whole picture is completely black. The camera is still functioning as if it is taking the picture. The flash continues to work, but unfortunately no picture comes out. But when I switch to the display mode to view my pictures, I can see the old pictures from my memory card. But I just can not take any new pictures. What should I do? What do you think the problem i


Hi there,You can refer to this page as this is helpful for most of the issues related to Digital Camera.Fix th ... Canon Digital Cameras

Help Once I get the back off my camera, I can't figure out how to take the cable off. The cable that comes from under the green board. What do I need to do to remove this so that the green board will come off?


If its a flat cable, they are all attached by a piece of plastic that must be moved, either up or down, deppending on its position to lock/unlock the cable. Its simple and easy but you have to be carefull to find that piece of plastic and while you h ... Panasonic Lumix DMC-LZ7 Digital Camera

My Canon Powereshot 200SX IS does not start properly. Display comes on but the lens stays closed inside and a led blinks. After a while display turns black, a beep comes on and the white text says: there is an error, try to start again. Starting it again brings exactly the same situation. Loosing the battery does not help either. Camera seems not to react to any control buttons. There has not been any any obvious reason for this, no falling onto the ground or any other impact.


See http://www.fixya.com/support/r13011856-lens_error ... Canon Digital Cameras

My camera was working fine and then it gently rolled on to the rug and then it never worked right since. I got the code in the corner of the display E18 and I cannot do a darn thing with the camera now. Should I just chuck it ? ??? Its a cannon power shot A400. (When I turn it on the display light comes on and it beeps numberous times and then the E18 signal comes on and then it goes away and the camera turns off. I do not even think the shutter opens up ) The batteries are charged so what now.


... Canon PowerShot A400 Digital Camera

Have canon Powershot A75 3.2 Mega pixel camera .. Now it is having display issue. Once i open my camera lens come out power come but unable to see the image in lcd to shoot.. Can you assist


First try pressing the DISPLAY button. If that doesn't fix it then this sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty st ... Canon PowerShot A75 Digital Camera

Focus problems Hi, my camera is not focusing clearly. We just used it recently and can look at clear pictures on the display screen but now when we go to actually take a picture it's blury (on the display screen and if a picture is taken). I also notice that all these different setting menu's come up on the display screen when we are in take picture mode. I took it in today and they said the lens could have been bumped or that their is something wrong with the focusing inside. So they would hav


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot SD100 / IXUS II Digital Camera

I have an SP800UZ. I have upgraded my computer to a Windows 7 machine with 64-bit. Now I can only get pictures off of my camera if there are only a few. If I have too many (I am not sure what the max is), then the system quits reading the camera, and the camera displays says, "Disconnected." I've tried this on 3 different Win7 machines with the same results, but it still works fine on my XP system. Also, the files are read very slowly on the camera on the Win7 machines yet the old XP system read


Please, install the Olympus ib program which originally is on the internal memory of the camera, or install the better and free Olympus Viewer program. ... Olympus SP800UZ Digital Camera

Flat Batteries I have a Finepix S700 and can not get batteries to last I even put a recharged set ( Failsafe brand) in camera which tested prior to insertion and all batteries read 1.25v or higher and camera said flat batteries Have a set of Kodak batteries which only last about 20 photos before flat battery light comes on Any answers ???


I've turned many of my customers into users of the Energizer Ultimate Lithium AA batteries. Many people who have been ready to throw their camera away find the Energizers fix all their problems. Make sure to get the Energizer Ultimate Lithium ... Fuji FinePix S7000 Digital Camera

My Camera will turn on but the display is black. I took a picture to see if the light in the display was messed up but it is taking black pictures. My husband messed with the display settings and it worked for a little while and it went black again and will not come back.


Reset your gadget to factory defaults........ If the problem is due to wrong settings then it will solve it. And If not, then their could be a mechanical problem so, get it serviced................ ... Samsung BL103 Digital Camera

Flat batteries Finepix S7000. Says batteries are flat. I have 3 sets of rechargeables, all freshly charged and have tried 1 set of new Panasonic heavy duty AA batteries. I can get 3 or 4 shots before the flat battery sign comes up and the camera shuts down. HELP!! (?).


A well known problem , this camera eats batteries there are high power (2950MaH) accus , those should be used with this camera even with 2700 MaH it is empty real quick ... Fuji FinePix S7000 Digital Camera

The LCD display on my Canon PowerShot SX10IS hasn't worked for some time. Today I hit the display button and it suddenly came on. When I hit the Display button again it went off and won't come on again.


It sounds like the ribbon connector to the dispIay might be loose, and needs to be reseated. You YouTube has some informative videos, but, basically, you have to take the back cover off to do this, which involves taking about 5 or 6 small screws o ... Canon PowerShot SX10 IS Digital Camera

Rebel XT - damaged ribbon cable from cmos


I would suggest soldering a very fine wire jumper cable to bridge the tear. However this is impossible on the ribomn cable itself. You woul have to trace the break to the solderpoint on the back of the sensor. Having said that soldering the jumper at ... Canon Rebel XT / EOS 350D Digital Camera

My camera comes on but the screen will not display. I can take a picture but cannot review them. If I put the card in the computer, the pics are there but have no screen display.


... HP PB360t Digital Camera

E18 ERROR SNAPPED RIBBON CABLE ON REPAIR ATTEMPT CAMERA WONT RUN NOW


Hello Dear,\015\012You are requested to take the camera to the Canon Care Centre, but only if the Ribbon cable is removed from its locked it can be reinserted but if it is torn off, even after setting the zoom lense of your camera the Digital Z ... Canon PowerShot S2 IS Digital Camera

My problem is a broken ribbon cable. Is there a


Donor camera off ebay would be your cheapest option. But, You will have to make sure ( some how) that the donor camera has a working keypad. This is an old camera now and the keypad ribbon, where it is folded over ( twice) will have become brittle an ... Fuji FinePix F470 Digital Camera

DCRSR-190E screen switches off when fully open - only works when partially open. Could this be a ribbon cable / flexi PCB cable issue -0 is this a common fault ? Neil


Its flexible wire / ribbon problem and lcd screen will work fine after replacing this part. ... Digital Cameras

Have Olympus U700 All Weather camera. When I switch it on the lens comes out fully, retracts, comes out half way and finally retracts again. 'D: 5e02' is displayed on the screen. Any ideas. Thanks, Simon Wright


... Digital Cameras

Yashica T Zoom - 35mm autofocus 28-70mm T* compact. On startup it just makes a whirring noise , the display comes on but the lens does'nt come out. Thanks Andrew Lewis


... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1265 seconds