Having problems with your Digital Cameras ?

When i turn my camera on it displays an error message "turn the power off and on again" when i turn it off and back on - it shows the same message


Answers :

Hello

The problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.

Use\012\012\012\012\012\012 these at own risk as it may further damage the camera.

Firstly ,\012 try connecting your ac adapter or usb cable.

Try holding the \012shutter button while switching on the camera.

Look at the lens , \012and if some of the lens 'circles' is misaligned or not concentric then \012try wiggling it (while holding camera lens down).

Try gently \012pushing or pulling the lens when it extends but this is risky as it may \012cause the lens barrel to slip out of its guidance system.

Another\012 way to do this is to place the camera lens down on a hard surface and \012then power it up. Be sure to use a soft cloth or something similar as to\012 not scratch your lens or casing. Let the lens push the camera up and \012down a few times and sometimes the little resistance provided by the \012camera is enough to get things going again.

Try hitting your \012camera near the lens on the body with the soft tissue on the palm of \012your hand.

Other than that , I would take the camera to a repair \012center for a evaluation to see if it would cost more to repair than to \012replace the camera.

If it is still under warranty I would suggest\012 you take it in before trying any of these steps and remove any \012off-brand batteries or accessories as some stores are really fussy about\012 warranty repairs on camera's with non-brand accessories.

Hope \012the advise is useful.

Regards
Andrea
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Everytime I turn camera on it displays a message of turn power off and back on. Can you help me I have taken battery out, and put back in, but still shows the same message.


CCD FAILURE call Sony for FREE REPAIRS ask them abt BAD CCDpls rate me well ... Sony Cyber-shot DSC-W80 Digital Camera

When i turn my camera on it displays an error message "turn the power off and on again" when i turn it off and back on - it shows the same message


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Digital Cameras

Camera was on, working fine. When powering off, telescoping lens did not retract so lens remained extended just a bit with lens cover open. Waited a few minutes, turned it back on and I get the "access" display message then the beeps and (turn power off and back on) message. While off, I have removed the battery, replacing it with a fully charged spare and it still does this. The lens tries to telescope a little bit and retracts a touch, but I can't get the camera out of this mode. Can it be res


Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Sony Cyber-shot DSC-W55 Digital Camera

My camera was dropped accidentally while capturing a image. After that i switched off and when I switched on for next snap, display shows access and after few seconds a message appears saying" Turn the power off and on again" I did this several times but no effect and even i removed the battery and inserted back still no use. Please help.


I am a technician who repair any electronic devices, i repair digi cam a few hours ago, foreign object or dust is not the cause of that error, digi cam has 3 lenses, 1 is outside lens, 2 is is the swinging lens and 3 is the retractable lens,... do no ... Sony Cyber-shot DSC-W55 Digital Camera

LENS ERROR my Nixon camera was working fine one moment, I was taking pictures and then after I turned it off, I went to turn it back on and it starting zooming and making the urghtt noice as it focused in and out. it does that several times and then the lens error notice shows up on the screen. then i press power and it turns off, but when i turn it back on, the same thing happpens. In the LCD display at the back the image we try to take looks like a pic in a TV with bad signal, I tried to clean


This seems to be a problem with switch and the sensor inside the camera, Some time it works on magicaly like nothing has happend, After having this problem I have to on & off the lens for 3 or 4 times and clean the lens and 3 small holes in the f ... Nikon COOLPIX S200 Digital Camera

Optio M20 Camera: Press on/off button to power up camera, the camera opens the lens cover, turns on a red led inside the lens, cycles the lens out and back in,then makes about 5 little popping noises. The back screen shows Pentax Optio screen for a second, then then the screen displays the word Auto Picture in the center of the screen and Green Mode at the bottom and at the same time it cycles the lens out and in. And for a brief moment in the back ground of the screen you can see the picture st


I got it!!! on my cam i hold down the menu button at the same time power on, it will showup a " ver 1.00" and lens move a little maybe u have to do it 2 times but second time it should work ... Pentax Optio M20 Digital Camera

I have a cannon camera, my boyfriend dropped it with the lens extended and now whenever I try to turn it on I get a message saying that there is a lens error and the camera will shut down. I have tried a couple of answers on this website, but most have to do with a lens that is stuck out, mine will still retract back and forth if you smack it on your hand. My problem is when you power it off and back on the error shows up and the lens will not extend then. Any suggestions are greatly appreciate


... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

My daughter's camera will not turn on. When the power button is pushed the green light flashes on top and the screen shows a message of "lens error". The lens cover is open and the whole lens is zoomed out and will not go back in. Is this expensive to fix or would it be best to buy another camera?


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... General Electric A735 Digital Camera

Canon 1000D Hello there, I'm in China at the Beijing games. my 1000D is giving me a error message 99. can't take picture. I have turn it off and on, take the battery out but the problem still come back after 4 or 5 snaps. please help. I have change lenses and clear the head but not winning. Thanx well i have the similar problem, that i could identify that the camera goes off state after 30 mins, then i found that the display power cannot come, but the camera is working with view finder, if i


Yep set the auto turn off higher and instead of removing the battery, just open and close the battery compartment.This appears to be a problem I have raised with Canon, hopefully they will release a firmware update soon to fix this ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

My camera turns on and then right back off. wen u press the power bottom the screen comes on and shows the Kodak label like its turning on and the lense begins to open but immideatly closes and the camera turns back off. i charged my camera all night but the problem persisted. the only thing i can think of is tht the day this happened i took my camera with me to the beach and it was warm but not extremely hot.


I had the same problem. This is how I fixed mine! Turn on camera grab the lens with two fingers before it can re-tract back into the camera and shut it self down. Use compressed air around the lens housing no more the 80 PSI. Hopefully t ... Kodak EASYSHARE M1063 Digital Camera

Hi I have panasonic Lumix DMC-FZ20 and when I start camera on the display it come with message "plz turn camera off and then on again." But it dont really do anything when restart occurs. It keep showing same message. Although it allow me to see old pics when started with play mode but dont start if the message has already on display. Moreover, when this message is on it wont allow me to work with any of the camera function including zoom in/out. . . Many Thanks . . .


Usually when this message pops up it indicates the lens position is jammed, you will need a camera technician to assess the item for repair cost. ... Panasonic Lumix DMC-FZ20 Digital Camera

My samsung s1070 will not turn on. it was working yesterday and i was able to take pictures with it. now when i turn on the power button the camera beeps three times but nothing is visisble on the lcd display. also the lense is fully out even though the camera will not turn on. why is this happening and can you please advise me how i can turn the camera back on so that the display works aswell?


OK you are probably going to think I am loony giving you this advise But No I am completely sane!Get a can of compressed air OR acces to a compressor at your local garage Get them to fit the triggered air blower tool to it.Blo ... Samsung S1070 Digital Camera

Power doesn't work properly. When I turn off camera with power button, lense stays out. When I turn on, the lense goes in then back out again, but after a few seconds, I get the message: "Please turn camera off then on again." If I don't do anything, the camera will turn off by itself, and the lense will go in. Battery is fully charged, and nothing dramatic happened to start this problem...


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Panasonic Lumix DMC-FX8 Digital Camera

I can't turn my camera on,I press the power button,it gives me a whirling noise,the lenses come out(but not all the way),the picture on the screen is blurry,and I can't make a shot,and after2 seconds the lenses come back in by itself.Then it does it again,without me even pressing any button!But I can still view my pictures.But I can't download them on computer,because it still displays an error message D: 5fo8 5e02,and the lenses start moving again.I don't know how to fix it.Please help me.Becau


The camera may be faulty or it needs to be reset to the factory settings.\015\012Try removing the battery leave it out for at least 1/2 hour, then replace the battery.\015\012If it doesn't work then you need a new camera. ... Olympus Stylus 700 / 700 Digital Camera

Error Message Hello! Every time I turn My Sony camera on it starts beeping and and giving me the error message "Turn the power off and on again." I've tried turning it off and back on, along with taking the battery out and putting it back in and even pressing the reset button and I'm still continuing to get the same error message. Any ideas on what I can try next?


I have the same problem ... Sony Cyber-Shot DSC-L1 Digital Camera

When I turn the power on, it beeps and says "turn the power off and on again" plus it shows a battery in the upper lefthand corner. When I turn it off and on, I get the same message. I can view stored pictures but can't take pictures. I have charged the batteries and it makes no difference. Since I have been using and recharging the same batteries since I got the camera, could it just be that I need new rechargeable batteries? I bought the camera in 2004 and love it. Is there any hope for this c


I'll forward a link to a page where you can view the information to troubleshoot this issue. Please click on the link to view the troubleshooting steps then follow all the steps and check if that helps. ... Sony Cyber-Shot DSC-P52 Digital Camera

After uploading pictures from my camera to my pc yesterday, the zoom lens will no longer retract into the camera. I do get a message on the screen of the camera that says turn the power off and on again. I have tried everything, and still no luck. I have plugged it back into the pc, I have charged it, and have turned the power on and off at all options, and it still will not retract.


I believe its a sony cam. this generally happens if you have dropped it. when the message comes. try tapping the camera. if it works then you are lucky. if not then you have to change the lens array. it costs about 60$ ... Sony Digital Cameras

DIGITAL CAMERAS HDC571 i WAS GIVEN THIS FOR CHRISTMAS 07 AND PRIOR TO THIS WEEK HAVE USED IT ONCE BEFORE. tHE BATTERIES SUPPLIED RAN OUT SHOWED NO POWER ON THE SCREEN SO I HAVE REPLACED THEM. i HAVE SICE TURNED ON THE CAMERA IT THEN INSTANTLY TURNED ITSELF STRAIGHT OFF AND WOULD NOT COME BACK ON. ATFER SOME TIME IT CAME BACK ONAND I TURNED IT OFF BUT NOW WHEN IT TUN IT ON ALL IT DOES IS FLASH ON AND OFF AUTUMATICALLY.


The camera uses a TFTLCD monitor, which is a high power usage device, any battery that are not high power will have the same results as you do (I have the same camera and done the same with cheaper batterys).I will say go to a supermarket ... Hitachi Digital Cameras

When turning on the camera a message comes up reading " Turn the power off and on again" and the lens seems to be struggling to open. When I turn off the camera & then back on the same message comes up everytime, please help !


Have you tryed brand new battertys ... Sony Cyber-shot DSC-W170 Digital Camera

Two days ago, I took pics with my Samsung NV3. Pics showed up on the display just fine. I turned camera off, put it in a case and in my purse. Yesterday, the camera would not even turn on. I fully charged the battery and put it back in the camera. Still the camera won't even turn on. What's up?


One of the solder joint (contacts) inside the camera was probably defective and is not making contact anymore, therefore the camera is not starting.\015\012\015\012Check camera warranty status. If warranty is OK, then contact Samsung and have t ... Samsung NV3 Digital Camera

When I recently turned on my camera (D-630 Zoom) to take a picture, I got the message titled Card Setup, with two options "Power off" and "Format". I turned the camera off, took out the memory card (1GB) and put it back in, as I did the last (and only) time this happened, about two years ago. But it has not worked, and I have been getting this message with the two options for a few days. Any ideas? Thank you.


If this exact card has worked in the camera before, chances are it has gone bad. Typically, if the camera says to format the card it is because it does not recognize the card. The only reason this would happen is if the card is unreadable from malfun ... Olympus D-630 Zoom Digital Camera

Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work.


*&%$@#%^&*&^% !!"It's working!!!!\015\012\015\012Turn your camera on and put it near your ear. Did you hear a softly motorized sound in the lenses area and the green LED is flashing? If you hear this sound do this.\015\012\015\012Do it under your own ... Panasonic Lumix DMC-LC33 Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


Could not believe it but it worked for me as well. First time I see that a good smack makes it work ... Sony Cyber-shot DSC-W70 Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


This is a hardware problem. Your simptons is tipical of a lens position sensor being faulty.\015\012\015\012There is however nothing you can do yourself. Contact your nearest Sony dealer and take the camera to a Sony service centre. ... Sony Cyber-shot DSC-W50 Digital Camera

Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work. hi expert i m suffring in this error on my panasonic DMC-LC33 when i switched on


Try \015\012\015\012Klomtrix trick this worked with my camera\015\012thanks klomtrix ... Panasonic Lumix DMC-LC33 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4946 seconds