Having problems with your Digital Cameras ?

I switched off the device and it remaind showing POWER OFF


Answers :

Remove batteries and put them back after a while and power it on again ..and see what is going on ...It should be working ..
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I switched off the device and it remaind showing POWER OFF


Remove batteries and put them back after a while and power it on again ..and see what is going on ...It should be working .. ... Digital Cameras

PHILIPS DTR4610/28 Watching terrestrial TV in Italy which has gone all digital needing decoder, I usually when switching off go through a ritual of pressing first the standby switch on the PHILIPS DTR4610/28 then pressing the power (off) button of the TV (R2 20LZ50) remote (which I use only for this and a bit for additional volume control). To switch on I go through the reverse routine. Maybe I did something in the wrong order last night, plus I pulled out aerial and mains of device and TV.


Hi ,I am Sorry to Hear regarding the problem. If you are Satisfied with the Solution Offered, Kindly Accept the Solution and Close the Thread unless, any Further Information, we would be glad the Answer that.Let me know, if ne ... Philips Digital Cameras

My NewBrand FLIP MINO HD2 once switched on and after having pushed red button ( recording ) is now blocked ! No responding to any command or doing any action ( no recording, no display, red light rechargin battery always on, no chance to switch off the device ! HELP ME PLEASE


Return it for a refund! i bought one, it did the same as yours. i \015\012returned it and bought the 2nd one. It did the same as the first one \015\012(and the same as yours.)It is a piece of junk. Supposedly the \015\012previous Flip ... Pure Digital Flip Mino Digital Camera

Good Day. I dropped my Nikon Coolpix L16 camera onto a table. Since then when i switch the device on the lens goes out about a quarter and the goes back in and i get a lens error message. I noticed that when the lens goes out it bends to the right(looking from the top) and gets stuck by something. When i pull the lens a little to the left while switching it on everything works fine. A very small metal part came out of the camera. Any ideas? is it repairable?


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Digital Cameras

I can transfer images from my nikon d700 to my desktop. The Nikon software have been installed in my computer. Every time I switch the camera on, to start transfer. The computer system says installed "device driver" . Whats device driver and where can I install it from? thank you....syed


Your computer is looking for a mass storage device. Go through the camera menu system and make sure "USB Connection" is set to Mass Storeage, then Windows will automatically install the drivers. ... Nikon D700 Digital Camera

When I try to upload pictures with a USB device, it says connecting.. and switch on menu. What do I do?


If Menu shows PicBridge, Mass Storage, FTTP etc options then select Mass Storage in camera Menu.Click on My Computer icon and check any new letter drive (mass storage) click it to see picture files in camera memory. ... Sony Cybershot S650 Digital Camera

When i plug it into the computer there is a message that say that windows needs to install driver software for unknown device. and second problem is that it will only switch on when it is pluged into a computer, making it imposible to carry around


The second problem is that your battery is dead and you need to replace it.\012 \012the first problem is that you need to go to the manufacture ... Digital Cameras

My Sony DSC-W130 camera when turned off will not turn back on until I remove the battery and reinstert . Also if the battery is not removed it will drain after a period of time. It is like the On/Off switch is not properly turning the device off and as such when you attempt to turn on again the restart function for the software in the camera does not execute properly. I have recently started using soem OEM batteries as well as the supplied SONY batteriers at times. . Maybe this is effecting


It may be a issue with the switch remained in on position ...blocked...or damaged...or ..something with the voltage of the batteries...if you noticed that the changing of the batteries lead to this behavior ..try the old stuff back again ..and see ho ... Sony Cyber-shot DSC-W130 Digital Camera

I have a Sony Cybershot DSC-W120 digital camera. The problem I am having is in regards to the lens going in and out whenever I switch on the device. The an error message appears on the screen saying "Turn the power off and on again". Should I take apart the camera? Please assist, thank you.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Digital Cameras

Not switching on the device


Try a fresh battery in case batter failed.\015\012If still no good then contact Canon ... Canon PowerShot SD600 Digital Camera

I have a Sony Cybershot DSC-W120 digital camera. The problem I am having is in regards to the lens going in and out whenever I switch on the device. The an error message appears on the screen saying "Turn the power off and on again". Should I take apart the camera? Please assist, thank you.


Try new batteries ... Sony Digital Cameras

Hi, I had a problem with a Sony video camera (HDR-CX6EK) in 2009. The problem then was that the LCD screen interferes when unfolding the screen and when the screen was unfold completely the voltage of the device fell away. They changed 6 parts: 3 for the panel section (MCBRD CK-178, PCBRD FP-737 FLEX, SWITCH BLOCK CONTROL) and 3 for the voltage section. Last week during my vacation i had exactly the same problem as before and I didn't film that much since 2009. Could it be the same p


This is normally the failure of the strip membrane that connects the display unit from the main board . This strip has been replaced before according to your data as the FLEX. \015\012Now this failure for the membrane line is quite common for a ... Digital Cameras

Canon PowerShot A710 IS Digital Camera. I attempted to download about 50 images from my camera and the first 30 or so copied alright but the remainder I can not copy because I get an I-O device error. I can see the pics fine on the camera or TV but I just can not copy them. Any suggestions:? thanks, Harley


Use a Card Reader. If you are using one then you should get a different one.\015\012If you are connecting the camera with the usb cord then it sounds like your driver is bad which you could reinstall. but if you use a card reader instead then y ... Canon Digital Cameras

Sony Cybershot DSC-T700 USB connection will not work. Tried on several PCs and Macs. Always goes to message " USB Mode Connecting... Switch on [Menu] Each mode has the same problem. (PictBridge doesn't work to the priinter.) Have also tried a new cable with no luck. My question: Is there a way to get images off the internal memory to the Memory Stick Duo since I cannot get connected to an external device?


Hi there, i will give you the solve. First select those photos which is saved in internal memory. After that press menu button there you can found a option move the photos or send to memory card. Just select the memory card. Then your all internal me ... Sony Cyber-shot DSC-T700 Digital Camera

I also bought the same mp4 player and it also has the same kind of trouble, when it is switched on a welcome screen appears and gets struck, nothing else can be seen! and my pc does not detect the device ! what can i do ??? please help me to make this working!!! please!! ATJ2237T cam XHB 7678F lcd XYXWO30-2 BL24061-1 100601G board-ZX-8002R-TLSK-V1.5 2009/03/23


... Digital Cameras

Uploading pictures whenever i go to hook up my camera to the computer it comes up saying connecting to pictbridge device then a minute later says enable printer to connect and underneath says switch on menu then i do that and all it does is come up with usb connect......do i need to change it from pictbridge to ptp or mass storage or what? i dont know what just happened..its worked fine for me every other time


Mass storage is easier, in my opinion. In that mode, when you hook the camera up to the computer, it will show up as a device in My Computer. Then you can just access your pictures there. ... Sony Cyber-Shot DSC-S500 Digital Camera

My computer doesn't recognize my camera ViviCam 3785 I could not get my new Canon SX110 to be recognized by my pc. I was using a similar cord for another device. After I switched to the white cord that actually came with the camera - voila! No problem, it worked like a charm. I guess all cords are not made alike? This site helped me, I hope this helps someone else who may need a little more description.


I run into this problem all the time with different cords. It seems that vendors like to keep you returning only to them when you have a problem with their devices. Thanks for the post ... Canon PowerShot SX110 IS Digital Camera

My Sony DSC-S730 won't switch to USB mode when I connect the cord, plug it into the PC and power up. I get no recognition of any new device on the PC... I did notice my cord tip (camera end) bent on an angle mysteriously)- can I just replace the cord and be all set? or are there problems with my camera?


Solve all your problems....use a card reader. ... Sony Cyber-shot DSC-S730 Digital Camera

I have a Canon Powershot SD600 that downloaded images flawlessly into Photoshop CS on a Window 2000 operating system. Since I have switched to Windows XP I have had nothing but problems. I have the camera driver installed, Photoshop is importing the device, but when selecting the image it won't download. Any ideas?


It's very hard to troubleshoot software problems online, and it likely is a software issue. But why put up with the headaches of bad software in the first place? Please see the following blog article, as it describes the use of a card reader as a muc ... Canon PowerShot SD600 Digital Camera

My EZReader T730 is not switching on...i even tried by charging but its not working..


... Digital Cameras

Panasonic Lumix DMC-FX5. Camera switches itself on even though it is switched off. Many occurrences of this. It has been examined and tested but nothing found wrong. Re-charged batteries run down quickly, even new ones. Comprehensive notes have been taken of the many events. In previous events, it switched itself on, then off again within seconds. This time it needed to be switched off by switching on then off switch.


... Panasonic Lumix DMC-FX5 Digital Camera

Switches off Camera is 2 - 3years old. I went to use it the other day and put in new batteries as it kept saying low battery then switching off, however once new bettiries were in it only allowed me to take a couple of pictures then it switched off again. I can however now switch it on to see other photos but a soon a I sitch it to take a photo it just switches off imediately! Please help


There are some power supply circuitry inside, one of those electronic chips maybe damaged.let it be service by qualified tech. \015\012\015\012Fred Loja ... Fuji FinePix S5000 Digital Camera

Mode Switch I have trouble switching from video to camera mode. The switch moves ok, but the camera stays in video mode. Sometimes it will switch, but may not stay there very long. Is this a dirty switch? Can I clean it?


I have this used camera and have the same problem. Does anyone know what the solution would be? I don't want to spend moneyy on this but would like to know if there is a DIY fix that I could try... Thanks ... Canon PowerShot SD300 / IXUS 40 Digital Camera

Switch glitch When i turn on my camera it goes off again within a few seconds (or maybe less). I have to turn it all the way off (slowly) and on again. Sometimes it stays on (at least long enough for a photo) and other times not. Has been getting worse so now the camera is pretty useless. I am presuming that the switch has had it (any other suggestions?) Interestingly while it was under warranty i had switch problems and it was replaced so this is the second switch on the camera. Is the switch a


I have the same camera and it does something very similar. I'm guessing it is not the switch but rather the internal battery for memory backup needs replaced. It is not a do it yourself repair nor is it cheap. One option you can try is to use the ... Fuji FinePix S5000 Digital Camera

I get error 99 with my EOS 1000D as soon as I try to shoot the first picture after switching on following either an auto switch off or switching off using the switch. re-installing the battery cure it until the next switch off.


Shutter unit is faulty you need to replace it\015\012its have come err99 problem which is can be sort out with service firmware 1.0.6 update and then put latest firmware 1.0.6 ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0479 seconds