Having problems with your Digital Cameras ?

My nikon d3000 showing error press shutter release button again. iam pressing the shutter release buttion iam any change it is showing me the same sign again and not abel to capter photos.

Answers :

I had the same problem. After looking up information on google, I found a very good solution. But be aware, it requires you to open the body. So, you'll need a set of very small screwdrivers, make sure you take one that fits perfectly to the screws. Open up the bottom part, you should see a small red gear (responsible for lifting the mirror). Turn it manually a bit, then insert battery and check if your camera works then. If it does, you're lucky. If it doesn't, you'll have to take off the metal part, to which you screw on tripod, as there is another white gear (responsible for lifting the sensor protector) under it. But to take the metal part off, you will have to take off both front and back sides of the body, to get to the screws. At all times remember where each of the screws go, as they have different sizes. when you get to the point where you have removed the metal part, you should get small tweezers, or anything small enough to fir under those wires next to the red gear, as that is where your white gear is at. Move it couple stops back and forth, and then insert the battery, try to press the shutter button 2-3 times, and it should be working. At least it did the job for my D3000. If your camera works, but everything back in the correct order and screws in their correct places, and that's it. You just fixed your camera.
I have the same problem with my D3000, as far as I've seen though, it only happenes when I try to take pictures sideways! my guess is there is some dust or other type of dirt in the camera, which stops the shutter when you try to take the picture!
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My nikon d3000 showing error press shutter release button again. iam pressing the shutter release buttion iam any change it is showing me the same sign again and not abel to capter photos.

I had the same problem. After looking up information on google, I found a very good solution. But be aware, it requires you to open the body. So, you'll need a set of very small screwdrivers, make sure you take one that fits perfectly to the screws. ... Digital Cameras

Nikon d80 - most of the time memory card access lamp flashes and shutter release button doesn't trigger shutter. Sometimes it will stop blinking and camera will fire. Sometimes when it fires it will not show a preview image. When malfunctioning I can not bring up menu screen or access any features (shutter speed, f-top, or review screen. Have tried different memory cards, and lenses with no change.

Hi pantha. Turn it on and go into the menu and find the reset function. Reset it. This will merely set it at all of the parameters it was set at in the factory. IF this reset does not solve ALL of the problems, then you will have to take it or sh ... Nikon D80 Digital Camera with 18-135mm Lens

Nikon FM: Shutter release button will not allow me to take another photo and I'm only on frame 15 of a roll of 24. The film advance lever does not move the film, but it does open all the way to the right & shows the lights on inside (so the battery is OK). I changed the battery just in case, but that didn't solve the problem. I'm wondering if the film somehow came undone inside.

The FM is a mechanical camera, the batteries only power the metering system. Sometimes what happens is when you buy film say in 4 roll packages, they give you 3 24 exps and a 12 exp. I suggest that you rewind the roll and check this. You will only ... Nikon Digital Cameras

Everything seems to be working but the shutter release button. It does nothing, even depressing the button halfway for metering shows nothing. no indicators in viewfinder info line. I assumed it was a third party Battery problem, as there was a Impact battery being used primarily at the time. However replacing the Battery with a pentax battery didn't change anything. Camera not dropped, or damaged in any way, its a sudden problem i cannot seem to troubleshoot.

Remove the lens and fire off a few shots. Re-attach the lens and try again. That sometimes works. ... Pentax K10D Body Only Digital Camera

Nikon D80 with a Sigma Lens (80 to 200 I think). In manual mode, often shutter won't release - this was a close up of a hummingbird with a fast shutter speed. Internal light meter showed underexposed, but the background was dark green. Initially, the shutter released, but later would not operate either with a remote, or by manually depressed the shutter release button. Switching back to auto, the camera seemed to work fine, but in this mode could not get the desired shutter speed. In full manual

In full manual, yes it should. ... Digital Cameras

Nikon d40 i"ve a nikon d40 camera when tryed the shutter release button it shows error press shutter release button and try again The same problem, Err: Press shutter release button again.

Take the lens off and continue pressing the shutter untill it doesn't react anymore, you should then have a normal menu without the error message.Put your lens on and you're all sorted.Cheaper and less hassle than sending it to Nikon.olly ... Nikon D40 Digital Camera with G-II 18-55mm Lens

D60: I just got back from Certified Repair group where they said the camera is "okay". The Problem: It's like the ISO has shifted, and the readings on P, S, A, even M all result in a long exposure/wide open aperture reading. Frequently the reading is such that the shutter will not release, due to no focus or wrong light amount. Frequently the focus "peep" does not go off, and so the shutter will not release. Two weeks ago it was fine, don't think I changed anything, but it's like a setting is

Have you tried going into the menu and finding "reset"? ... Digital Cameras

Nikon d80 camera shows err error, when shutter is pressed the amount of shots remaining, shows er07. shutter works, but no picture is taken. Bracketing sign is also on display and wont go off.l

Failure of the aperture unit is the usual cause - usually the contacts for the phase switch have come loose from the gear. You can find info on this by searching for the problem on the internet, including how to repair it. ... Nikon D80 Digital Camera

Nikon d40 i"ve a nikon d40 camera when tryed the shutter release button it shows error press shutter release button and try again

... Digital Cameras

My Nikon D40X shows an Error for the shutter release. It says "Error. Press shutter release button again." When I push it again, it keeps giving me the same error. Is there a way to fix it without sending it to a camera repair shop? I tried taking out battery and resetting camera, and no luck. Any advice would be appreciated!

Hello. I have the D40X myself and I have had success by going into the menu and locating the reset button. What this does is return the camera to the settings that it had the day it came out of the box. Joe ... Nikon D40x Digital Camera

Ive a nikon d40 camera when tryed the shutter release button it shows error press shutter release button and try again. i can not take any pictures. I've never had this problem before.

I found the fix for this Nikon Shutter problem and posted it on my blog.http://jacko0.wordpress.com/2009/10/13/d40x-underside/ ... Nikon D40 Digital Camera with G-II 18-55mm Lens

Pentax K110d flash trigger problem, I have 2 flash trigger strobes set up and a flash on the hot shoe of the camera, but with shutter release the trigger strobe lights fire but do not show in the pic, only the hot shoe flash is reaching the sensor. but if I slow down shutter to 0.5 sec the strobes show up.?

Your camera uses a PTTL flash system. That means the flash on the camera fires a "pre-flash" to set the exposure and then the main flash. Your flash trigger strobes are reacting to the pre-flash and firing before the shutter activates. This all happe ... Pentax K110D Digital Camera

Flash Problem Rebel XT flash icon shows next to "busy" in the view finder when I press the shutter button. If I attempt to take the photo the flash does not work. If I continue to hold the shutter half way down, then release it I get Err 99. I am using genuine Canon lens' and have tried all three. I also connected my 420EX external flash and it also does not flash. Any suggestions are deeply appreciated. Thanks

Hey tombston,\015\012 An error code of 99 is Canons general error code for this camera, and they suggest cleaning the lens contacts and/or removing the battery and then reinserting it. If this doesn’t work I wou ... Canon Rebel XT / EOS 350D Digital Camera

I have a minolta maxxum 7000 camera that will not trigger (snap the shutter.I've tryed 3 other lenses but it does the same with different lenses.It will auto focus when the shutter release button is pressed half way as it should and the specs show in the display area through the eye view.But when the shutter is pressed all the way down nothing happens.All the specs go away too(iso,f stop,film count etc).Any ideas?

Could also be minor corrosion in the battery compartment, that won't let the shutter current pass. I had that problem once. ... Digital Cameras

Over exposure The exposure settings on the camera have suddenly become fixed - I can't change them either through fixing shutter speed, OEV, or any other settings. Even tried a factory reset by selecting 'initialize' from the menu, but the problem persists. High or low exposure settings are visible on the viewfinder (i.e. changing the settings shows the picture getting darker or lighter on the screen), but once the picture is shot, it's fixed at an overexposed state.

... Sony Cyber-Shot DSC-HX7V Digital Camera

My d90 flashes an err sign somtimes when i shoot at manual mode.. but when i change my apperture and shutter speed setting, it will not appear anymore. Even at auto mode sometimes it flashes an err. Does the d90 flashes an error when you made wrong setting in your apperture and shutter speed?

On page 256 of the D-90 user manual it says that an ERR message indicates a camera malfunction and that the malfunction can be cleared by releasing the shutter. I found that the only way I could release the shutter is to turn the camera off and back ... Nikon D90 Digital Camera with 18-105mm lens

I changed the exposure compensation to manually bracket photos, changed the D Lighting.Regardless of mode I am in the display indicates the image is to dark and the shutter will not release, where do I go from here?

What do you have the ISO set to? ... Nikon D3000 10.2 Megapixels SLR Digital Camera with 18-55mm VR & 55-200mm DX VR Lens Kit

The f number is constantly showing 95 and i can't change it. the pictures are coming black. sometimes there is no f number, instead of it, a sign like f-- is showing. what to do????

Hello, This error means the lens is not connecting properly.Remove the lens and give the\015\012contacts (silver pins) a quick clean. Also wipe the camera body contacts.This should fix it. ... Nikon D80 Digital Camera with 18-135mm Lens

On the lcd screen it shows "error press shutter release button again" and i do and it wont take a picture and shows error message again.

Reset the camera by taking out the battery or by reset button. ... Digital Cameras

I have Canon power shot S2 IS digital camera.I bought it around 2 years back.Now my camera is showing the sign of "change the batteries" even though the batteries are fully charged and the lens does not come out..When I tried the same batteries on other digicamera they are working fine. Very few times the camera starts working but after taking 2 or 3 pics the low battery sign appears on the screen.I use AA size NiMH Sony batteries. Can you let me know the solution to my issue.

I suggest replacing a fresh battery will most likely solve your prob, overtime rechargeable battery can drain easily, try changing with a new battery and see if it does work well, there might be insufficient current, thats why it tends to drop of vol ... Canon PowerShot A540 Digital Camera

Anti-shake problem My Konica Minolta 7D stopped taking pictures. It will still auto-focus, but nothing happens when you press the shutter button all the way down. The problem I experience is: 1. Shutter does not release. 2. When camera is powered up, after the initial lens shuffle a clicking sound is heard. 3. The auto shake bars (all five of them) to the right of the view finder are blinking 4. Show 0 (zero) as the number of frames remaining in the view finder. 5. The problem is intermitte

Symptom 1: referred to as FFB (Firts Frame Black). this is when you do not use the camera for a while and when you attempt to take the first snap shot, the Shutter is either stuck, or takes a blank/black picture (some cases the picture came out bluis ... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

I have a d70 and it has locked up completeley with error r07. Have tried everything from memory cards, to resetting file sequence, changing lenses, changing to manual focus and all other suggestions it will not take a picture. When you press the shutter release it will click but you need to press again to clear it. Help

I know this may sound silly - but how are your batteries? Mine would do that when the batteries would run out. If that's not it, you might try the reset button. It is located opposite the battery compartment on the left\015\012 side (when viewed fro ... Nikon Digital Cameras

D80 "battery drained' and "F"sign when pressing release button

Pls make sure of the following:\015\012\015\012- You are using original Nikon batteries (generic batteries gave a similar problem to me)\015\012- The aperture ring of your camera is correctly placed ... Nikon D80 Digital Camera with 18-135mm Lens

Shutter on my E500 won't release. Camera boots up fine. Will auto focus fine but as soon as the release button is fully pressed the shutter will not release and at that point everything freezes up

... Olympus EVOLT E-500 Digital Camera

My olympus om10 is in great condition... however my light meter doenst come on as of recent... i have changed batteries and still no response... also my shutter (when i press the release button) just opens a little and locks into position which has to be reset... after this the find wind-on lever is also locked......?? HELP PLEASE!!!!

Verify your shutter speed setting, it may be in the bulb setting or a very slow shutter speed such as 5 or 10 seconds. In the menu I think you can revert back to factory settings, most digitals offer this option.\015\012\015\012I am sorry ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 2.5364 seconds