Having problems with your Digital Cameras ?

My lens came out once I powered on and now will not go back in. All I get is a Lens error code 0x0211, Only had this camera just a few short weeks and take good care of it. What the heck?. This is the second such camera, SAME model that I have had a problem with.


Answers :

Fixing a Lens Error on a Digital Camera
\012


\012

This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012

The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012

The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012

Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012

Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
\012

Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012

Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.

Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My lens came out once I powered on and now will not go back in. All I get is a Lens error code 0x0211, Only had this camera just a few short weeks and take good care of it. What the heck?. This is the second such camera, SAME model that I have had a problem with.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Digital Cameras

I've had my camera for about 3 years now and have never had any problems until a couple of weeks ago. When I turned the camera on, it forced me to reset date/time and would occasionally show aperture 00 and not take a picture. Turning the camera off and then on again, or removing and replacing the battery temporarily took care of the problem. Now I am getting the ERR 01 and can not take pics at all, regardless of which lens I use or whether I am using the IS option. I've tried cleaning the c


Try getting new trusted brand batteries like duracell, And also if it forces you to change the D/T just change it. Also try getting a new memory card. (trusted brand). If none of this works then there might be a prob. Maybe someone dropped it. Try as ... Canon Digital Rebel XT / EOS 350D Body only Digital Camera

The camera was bought in Berlin two weeks ago from the SONY CENTRE !After downloading the pics to my PC for the second time,I erased the pics in the memory card also for the second time,and put the battery on the charger at night! So far so good!The next morning when i placed the fully charghed battery back in the camera and pressed the power ON,the lens goes IN-OUT three times and the screen indicates in a menu 'Turn the power off and on again';Also out of this menu on the screen(monitor) the '


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sony Cyber-Shot DSC-P10 Digital Camera

Kodak V1003 A few weeks ago, shortly after I'd taken a pic, the lens refused to retract and the camera switched off. It has never been dropped or had anything spilled on it. Strangely, when I press the button furthest left the camera comes on, allows me to view pictures on the card, set the time etc - everything except take pictures. Again when I try to switch off, the lens does not retract. Does this not suggest a software glitch of some kind?


No, unfortunately that is a problem with the hardware, software would not prevent the lens from retracting.\015\012\015\012If it is within manufacturer's warranty (usually 1 year) take it to any Best Buy they will send it out to the mfg f ... Kodak EasyShare V1003 Digital Camera

The camera was bought in Berlin two weeks ago from the SONY CENTRE !After downloading the pics to my PC for the second time,I erased the pics in the memory card also for the second time,and put the battery on the charger at night! So far so good!The next morning when i placed the fully charghed battery back in the camera and pressed the power ON,the lens goes IN-OUT three times and the screen indicates in a menu 'Turn the power off and on again';Also out of this menu on the screen(monitor) the '


Hi there lakispapNormally , this error would indicate a lens error where the lens cannot extend out of the barrel. Usually it's because of accumulated dirt in the lens sheath , but since you camera is only 2 weeks old , this is barely an ... Sony Cyber-Shot DSC-P10 Digital Camera

MPEGMovieVX DSC-P200 I dropped this camera in the water last week. When I dropped the camera it was on and ofcourse went out after just a few seconds in the water. We removed the casing and dried the camera out. Everything seems to be functioning normally with the exception of taking a picture. When in any mode, the screen is just black. It's as if there is no light getting into the lens. The screen still shows all of the functionality, I can still adjust functionality, and I can still view pict


There is a sensor behind the lens of your camera that takes light and converts it to electrical signals that in turn is decoded by the board. If the sensor is damaged, there will be no picture to display only what you have in the memory stick. Work o ... Sony Cyber-Shot DSC-P200 Digital Camera

After I take a photo my camera says it's "busy, please wait" for about 10 seconds. I bought and formatted a new SD 4 GB card and it stopped doing that, so I thought it was good. After about a week, it started doing it again. This camera should not be doing this. Please advise.


I was having the same problem and contacted Casio. The issue seems to be that there are pictures/video on your internal camera memory which is conflicting with the memory card. Here is the fix:\015\012\015\012Turn of the camera and take out yo ... Casio Exilim EX-S12 Digital Camera

I have purchased two Kodak C143 Digital Cameras since August of this year. The first one, only had for a couple of weeks, worked great at first and then when I would turn it on the lens would come out but there would be no screen at times. At other times the screen would disappear after a couple of seconds, but the lens would not close. I tried taking the batteries out and putting back in, but that did't help. I then took it to K-mart where it was purchased and they told me that it must be the c


... Kodak C143 Digital Camera

Canon Powershot A610 digital camera--LCD screen shows icons, but otherwise is blank--there is no visible movement in the lens when I take a picture without flash--have tried setting it on TV setting and taking a picture, then opening the battery cover for a few seconds after waiting 7 seconds or so, but no images on the LCD except the camera's icons--ideas? probably a stuck shutter, or is it still possibly the CCD sensor even though there's no visible movement in the lens? Ideas? Thanks!


Much more likely that it's a stuck shutter, especially for your model camera. How many tries did you give the fix? Some people stated that it took at least 15 repeated tries before the shutter opened:\015\012\015\012\015\012 ... Canon PowerShot A610 Digital Camera

When I turn on my Nikon coolpix S210, it gives me a lens error prompt. I have read posts on another website and it said everything from hold the lens out by force to turn the lens slightly clockwise while it is out to rap it slightly a few times, to changing battery to taking the camera apart. Short of taking the camera apart, I have tried them all. Nothing works. I just put alot of money into the camera buying extra picture cards, batteries, etc. NOW IT WON'T WORK! And there doesn't s


Your only other option is to take the camera apart. Sending it in would cost as much or more then a new camera. Really you don't have much to lose because right now the camera is broken. I will link you to one helpful site that has a write up tearing ... Nikon Coolpix S210 Digital Camera

I applied lens cleaning fluid directly to the lens of my camera, a Fuji F50FD digital compact, but it seems to have leaked into the lens housing. Any photos I now take appear with mutiple fine white streaks across them. Curiously, when I shoot in video mode the footage appears completely unaffected. Is this something that I can fix myself - is it just a question of taking the camera apart, then cleaning the inside with care? Or would the lens housing now to be replaced?


This is not something I would recommend you do without the proper knowledge or alignment tools. You would probably just end up with a brick instead of a camera. Sending it to a repair center would be very expensive. Possibly much more than the camera ... Fuji Finepix F50FD Digital Camera

Toshiba PDR-M700 When I power up the camera, the lens will not come out and sometimes will come out all the way to maximum zoom. When I power off with the lens out, it clicks as if something is stripped or loose. After shut down, I can push the lens back in. Once in a while the camera will work but eventually the "Lens Error" message comes up. This was a good expensive camera when I bought it but taking it in for service would probably cost more than the price of a new camera today. Can you sugg


It sounds as though the drive gear is slipping... If you give up on trying to repair your camera I may want to purchase it for parts (my sister-in-law broke my LCD display)[email protected] ... Toshiba PDR-M700 Digital Camera

Hi, I have Nikon P90. From last week i am facing following problem. Whenever i switch on my camera for taking pic, everything starts but i get message on the screen " Lens Error (If lens cap is attached,turn the camera off, remove the lens cap,and the turn the camera on) The above error message is their despite i opend the shutter of the lens. Kindly help me to know the above problem.


Hi,Here is a tip that I wrote about How toget a Digital Camera Lens to work againSteps toRepair a Digital Camera Lens\012heatman101 ... Nikon D90 Digital Camera with 18-105mm lens

I just got this new camera and about a week ago I was taking a picture when the battery was low. the warning sign came up and i was about to shut it off when the lens did not go back in. now the camera will turn on but I can not see the screen, the lens will not move, and i can not take a picture.


Don't mess with this. Bring it back to where purchased and exchange for a NEW replacement. I wouldn't accept a camera purchased as new - only to have to send out for repair a week later! I'd want a NEW one. You should too. Most sellers ha ... Samsung DualView TL205 Digital Camera

Dear Sir/Madam, My daughter did get an Olypmus FE-340 digital camera last year but has since a few weeks problems with this camera. On switching on the camera the lens keeps opening and closing. When the lens stops there is no automatic focusing and only by taken out the battery the lens will close itself. Is it possible for you to advise me which action to take? Yours sincerely, Rob Bliekendaal Celbridge


HelloThank you for using FixYa for your problemAlways check the batteries first but if is it still giving the same fault, your camera is faulty. It should be taken to an authorized repair centre for a repair ... Olympus FE-340 Digital Camera

Lens error I've had my camera for about 9 months and it's been working fine. 2 weeks ago I turned it on, went to take a photo and instead got this "Lens error" and the lens won't retract back in and the camera won't do anything. Sounds like this is a typical problem. Anything I can do to get my camera working again?


Try these procedures. ... Nikon Coolpix L11 Digital Camera

Went on a 3-week trip with my SX120is and it performed flawlessly. Downloaded all pictures upon returning. Hadn't used camera for a couple of weeks when yesterday the screen started displaying a very low resolution frozen picture and the camera stoped responding to all the controls. After about 10 seconds, the camera turned off without retracting the lens. This problem keeps repeating, but not the exact same way every time. Sometimes the camera functions well for a minute or two before hang


Did you go by the ocean on your trip? If so it probably got some salt air in it and would need to be cleaned. ... Canon PowerShot S3 IS Digital Camera

The camera was dropped in water for a few seconds. I managed to take the battery and memory card out after I retrieved it from the water. The camera was then dried and I was able to take a few pictures after the mishap. It's been a few weeks now and the camera does not work. I tried to charge the battery, thinking it was a bad battery, but the battery charger would continuously blink a red flash for hours! Can this camera be saved?


... Casio Exilim EX-Z77 Digital Camera

No power I purchased a Canon 400D about a year ago and shortly afterwards the camera suddenly gave up on me. I took a couple of photos and then nothing. The battery was fully charged and the power light came on when the camera was switched on and remained on even when the camera was switched off. I was going to take the camera in to a service centre a few weeks later for repairs but when I switched the cameraon again, the problem seemed to have disappeared. Since then I have been taking photos w


This definitely looks like an issue with the Camera. I suggest contacting the Camera Tech Support immediately and request them to send the Camera to the service center. There are more Canon Rebel XTi owners, including me have experienced no-power iss ... Canon EOS 400D / Rebel XTi Digital Camera

Hi Experts, I bought an Olympus C170 camera 6 years before. It was good... recently due to some problem Technicians changed Lens in my camera.. Now the problem is I feel some delay time while I am shooting.. I am not able to grab the scene which I suppose to take. Once I pressed click button.. it takes some time to get flash/photo. Please clarify what would be the reason... Is there any setting needs to be done in my camera .. or its a camera issue.


When taking a picture, you must press the shutter button half-way and allow the camera to lock in the focus (it will beep) and then press the rest of the way when the moment is right for an instant picture. Is that what you do? ... Olympus Camedia D-425 / C-170 Digital Camera

I have a Moultrie D-IR55 camera. Sometimes it takes good pictures, but on other times it takes a picture and then makes it look like a jigsaw puzzle with the pieces shuffled around. I have another identical camera and it has no problems. The only difference is that one camera is on single shots every 1 minute and the one that is having problems is on multi-shots every 15 seconds. Please advise.


Set the one set to "multi-shots every 15 seconds" to "single shots every 1 minute". ... Moultrie Digital Cameras

Problem*cybershot DSC-S40 Hi 3 day ago i turn On camera.but after Shot,camera Lens problem is started(not Close or ready to use) ...Lens Vibrating!!!Lens sound is geeeeeezzzzzzhhh!!!!(10-15 sec)..... Turn ON and OFF take a Few Second ( 10-15 Sec ) .....finally this text show in the screen : "please turn OFF and ON again" i don't remember camera Dropped !!!! Or other thing ... battery is FULL charged !!! JUST i can review recent picture please Help meeee :(


You have a jammed lens error the lens has to be repaired or replaced. You dont have to drop the camera for this to occur it can happen when ever the camera is in your pocket or purse. it accidently gets turned on and when the lens is coming out it is ... Sony Cyber-Shot DSC-S40 Digital Camera

I have a Minolta Maxxum 5D which I really like. I take a lot of pictures outside with my job. I have a telephoto lens and a regular lense as well. I switch lenses a good bit depending on the shot. Everything was working well until I now get a message that reads "no lens attached" when there is a lense on the camera. The weird thing is that I only get this message on my regular lense and my telephoto lens works fine. I even carried my camera by a local Minolta/Konic dealer and they were baff


It can occur if the contacts on the lens where they meet the contacts on the camera body need cleaning. Try a cotton swab lightly dampened with rubbing alcohol. ... Konica Minolta Dynax 5D / Maxxum 5D Body only Digital Camera

Will i was taking picture and my camera fell and my lens broke i turn on but it only says len erro my camera is good it just the lens that dont wole so am trying to see how much will it be to fix it


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Sanyo VPC-E760 Digital Camera

When I switch the camera on the screen stays blank even though the lens comes out, it eventually goes off (with the lens still out after about 40 seconds). I can get the camera to work if I press the green "view" key and then, after the picture appears, press the red camera icon and it will go into auto shoot mode. Happens every time now. I can't take it in under warranty as it was a present and I don't have the receipt unfortunately.


Replace the batteries then check ... Olympus FE-170 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5788 seconds