Having problems with your Digital Cameras ?
As soon as i turn my camera on it says lens error on the screen and the lens goes in and out and it makes a weird noise and then it just turns off.
This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
As soon as i turn my camera on it says lens error on the screen and the lens goes in and out and it makes a weird noise and then it just turns off.
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Digital Cameras
My camera fell on my floor when I was trying to film a video. Now it is stuck with the lens out, and when I try to turn it on it makes a weird noise, stops, makes it again, makes a new 'bloop' powering off noise, and that's it. I can click the little play button in the square to view my pictures and it will make noise and turn on and I can go through my settings but it will not let me switch to actual camera/video mode! What do I do?
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Samsung SL605 Digital Camera
When i turn on my camera the lens goes out, makes a noise, zooms in, makes another noise, then goes off. the number of the camera is kodak easy share m883
Make sure that you are installing a fresh/ full charge battery\015\012Remove the batteryClean the metal contacts on the battery using a clean cloth \015\012Pls test with an alt. batt.If you do not have access to a dif. b ... Kodak EasyShare V603 Digital Camera
A friend of mine dropped my camera while the lens was extended. The camera now does not turn on but makes noise and attempts to turn on. The lens goes out and then back to the position it is stuck in. I don't know what to do to fix it or where to take it. I have an Casio Exilim EX-S10. It's an expensive camera, so I'm hopeful it can be fixed.
The lens mechanism could be jammed and cause a failure of the lens control system. You can remove battery and card replace battery and while switching on tap the lens hood on your hands so as to disengage any dirt or mechanism being struck. ... Casio Exilim Card EX-S100 Digital Camera
When i turn the camera on, the lens telescopes out. then it makes a noise like it's still trying to open and then the lens goes back in and the camera turns off. what's wrong
The gear is worn or has sand or grit on the teeth causing it to not open up without resistance.\015\012\015\012I would contact Polaroid directly regarding this issue to see if it is repairable economically:\015\012\015\012 ... Polaroid m737t Digital Camera
Is there any way I can get my camera back to normal! I turned it on and it said "focus error". When I shut it off to see if it would start over correctly it would not close the lens. I turned it on and the lens closed and then opened again and wouldn't focus. I turned it off and the lens won't shut. How weird is that? It obviously is capable of opening and closing but seems to be reversed and makes a funny noise when it can't shut at the right time. Can I wiggle or giggle something? I bo
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to g ... Digital Cameras
At first when turn on the camera and the lens got out but the camera dosent work and know y cant closed. still out always. The camera make a weird noise and dosent close the lens.the screen show:"lens error, restart the camera"
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\ ... Canon PowerShot SD1100 IS Digital Camera
Len I dropped my camera and it hit the ground lens frist. now when i turn it on it makes a weird sound and the lcd screen shows nothing then it turns off after like 4 secondsand the lens goes back in wat should i do ?
Camera lens has problem.need repair lensmydc digital camera reapir ... Casio Exilim Zoom EX-Z700 Digital Camera
Lens error i dropped my camera and the inner lens went in but there is a small circular part surrounding it that came out all little bit. i turned on my camera and it says lens error and makes a weird noise
If it is a canon than your lens is probaby uneven on the inside, If it is another brand than when the lens come out try to hold it out ... Digital Cameras
My Nikon Coolpix S203 has a "lens error". Every time I turn on the camera, then lens goes crazy, moving in and out and zooming in and out of focus, all the while making a beeping noise. It then retracts back into the camera and the message "Lens error." appears on the screen. Please, is there anything I can do to fix this? Thank you.
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Nikon Coolpix S203 Digital Camera
My sony camera keeps making a strange noise at the lens everytime I go to turn it on and it stalls at the cyber shot opening. Then, once it decides to turn itself on after the lens goes back and forth, it comes up in a blurry backround telling me I have to turn it off and then on again but it keeps doing this in repeat
This is a mechanical problem with your lens and needs to be taken to a repair shop. ... Digital Cameras
Canon ixus 09is Turn camera on - yellow light appears - camera makes noises like its ready to go - screen doesnt work and it takes a few goes to turn it off. Even when the lens eventually retracted and stayed shut the yellow light stays on and the camera got very hot
... Canon IXUS 90IS Digital Camera
Lens stuck Please help me, I tried to turn on my camera today (it had been working fine before) and when I tried to switch it on the lens would not fully it open and my camera was making a whirling noise. The screen is black and will not take photos. The lens won't open fully and when it does eventually close has difficulty doing so. The camera then makes a beep beep beep noise and displays "Please turn the power on and off again". Please help I can't live without my camera and can't afford
If the lens is not coming out, its stuck, or it wont completely open or close, that is the lens assembly, that needs to be repaired. You need to take it to somebody, that can either repair it or replace it for you. There is nothing that can be done, ... Sony Cyber-Shot DSC-P8 Digital Camera
Problem with the Polaroid I1037 Digital Camera The lens is stuck out and when I turn it on it makes a buzzing noise and the lens goes in then back out and it turns off. I tried changing the batteries, checking for dust, checking the memory card. I am not sure what it is doing.
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to g ... Polaroid I1037 Digital Camera
As soon as I turn my camera on, the lens starts making a weird clicking and buzzing noise. I then get a message on the screen saying "Please turn camera off and on again"
HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Panasonic Lumix DMC-FS3 Digital Camera
When i turn my camera on, it makes two beep noises and turns off leaving the lens sticking out?????
... Kodak EasyShare MD41 Digital Camera
When I turn my camera on, it makes noise like it's turning on, the lens goes out, and the screen lights up... in less than 10 seconds it turns off again...It is NOT my battery. HELP!
I've seen this problem many times at my work. Unfortunately there's no one cure all for it. You could take it in for repairs, however, if you don't have any warranty or insurance protection it's usually cheaper to buy a new one. ... Kodak EasyShare M1033 Digital Camera
Lens error my camera turns on and the optical zoom lens comes out and then goes in and out and makes a noise and the lens error comes on, how can I fix this
First check the battery for full charge.This may be a damaged lens system. Lens error is usually E18 or text "lens error" or other error message.What you both can try is something I have tried and fixed some cameras.As t ... Nikon COOLPIX L3 Digital Camera
Olympus FE-280 I can no longer take photos with my camera! When I turn it on it makes some weird noises as the zoom lens adjusts, and then the viewer screen is blurry when it comes on. If I try to zoom in or zoom out, the camera simply shuts off. I can view pictures that I have already taken, and the battery is charged. What's going on?! Camera bought at Christmas 2007, is this covered under warranty??
1 year warranty on olympus products, but does not cover physical damage such as impact, water, or sand ... Olympus FE-280 Digital Camera
S220 Coolpix has a lens error problem, turn camera on tries to focus (Lens moves in and out making a weird noise) but comes up with a lens error problem
Did it drop? sounds like the motor is trying to move the lens as you need, but the lens has come out of its tracking. If there is no outside damage and you still have warranty left, you should get it replaced, otherwise it means opening it to place t ... Nikon Coolpix S220 - Aqua Green 2.5" LCD Digital Camera
Camera lens The lens itself is making a strange noise and it is having trouble adjusting itself when the camera turns on. When I attempt to turn the camera on all you are able to see is a black screen and there is also a buzzing noise which I assume is the lense trying to adjust itself. The lens is trying to push itself outwards but it is getting stuck. I'm not exactly sure what is wrong with it but I assume that once Iam able to fix the lens I will be able to use the camera normally again.
Broken gears is common on the sony cameras. They have very brittle gears and have more torque then the gears can handle. They just break teeth off. There was probobly some small debris (sand,dust) stuck in one of the teeth and it got to that point an ... Sony Cyber-Shot DSC-P72 Digital Camera
Hi there, I have panasonic lumix fx12, the camera was working fine till suddenly i saw this msg "please turn off the camera and turn it on again" when i turn it off the lens does not goes in and when i turn it on the lens goes it and comes out again but as soon as i press the capture button again the same msg appears on the screen and again the same story, I can hear a little noise from the lens for a few sec too! Could any body help me on this please!!!!!!!
Some say that this could be because the lens is out of alignment. See here: http://www.digitalcamera-hq.com/products/panasonic-lumix-fx12?dj=1&ratings=1 ... Panasonic Lumix DMC-FX12 Digital Camera
My Olympus stylus 1010 lens is sticking out and the camera won't really turn on; the light on the power button turns on, but it just makes a pathetic whirring noise and shows a weird blurry picture on the screen.
Hello FitsbeewThis either means that something is jamming the lens , or that the lens sensor is faulty. This is a very , if not the most common problem with modern digital camera's. The reason why the image is blurry is because the Auto f ... Olympus Stylus 1010 Digital Camera
When i turn on my nikon camera the lens goes in and out a million times and makes a clicking noise and then says lens error.
Try the procedures in this tip. ... Nikon COOLPIX L3 Digital Camera
Can't zoom! I can no longer take photos with my camera! When I turn it on it makes some weird noises as the zoom lens adjusts, and then the viewer screen is blurry when it comes on. If I try to zoom in or zoom out, the camera simply shuts off. I can view pictures that I have already taken, and the battery is charged. What's going on?!
I had the same problem, I sent it to Olympus. The camers working fine one evening and the above problem in the morning after insrtalling charged battery.syed ... Olympus FE-280 Digital Camera