Having problems with your Digital Cameras ?

I have a Panasonic AJD 250P DVCPRO VTR (Recorder/Player), that was used less than 100 hours from 2000-2002. It sat for the next 8 years in a computer room unused. I ordered a new mini DVCPRO tape and tried it out again. Even after I let it warm up for a few minutes, it either gives me error message 31 (loading operation is not completed within 4 seconds), and if I don't get that message, if I rewind or FF the tape, I get error message 61 (the supply reel motor is locked). Do you think this is a

Answers :

After 8 years of non-use, any lubrication will have dried. Any rubber belts will have lost most of their elasticity.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Panasonic AJD 250P DVCPRO VTR (Recorder/Player), that was used less than 100 hours from 2000-2002. It sat for the next 8 years in a computer room unused. I ordered a new mini DVCPRO tape and tried it out again. Even after I let it warm up for a few minutes, it either gives me error message 31 (loading operation is not completed within 4 seconds), and if I don't get that message, if I rewind or FF the tape, I get error message 61 (the supply reel motor is locked). Do you think this is a

After 8 years of non-use, any lubrication will have dried. Any rubber belts will have lost most of their elasticity. ... Digital Cameras

My Canon ZR200 camera will not eject the tape. I never had this problem before. Camera has never been dropped but all of a sudden the message to eject tape showed up but it won't do it. After repeated emails to Canon it is evident that they are not going to give me the info to remove the tape myself. They want me to send it in (for a price to be determined after I send it in) or to trade up at a cost. I don't want to do either, just get the tape out of camera. I don't even care if it never work

Does anyone have the help I need to get a service manual for a Canon\015\012ZR200 digital Mini DV video camera. I need help in opening the camera\015\012to get the tape out. It will not eject the tape and I need to get it\015\012out for a customer. B ... Digital Cameras

I have a Nikon S6 digital camera, everything about the camera seems to work fine, except for this "lens error" message I keep getting. Sometimes I'll turn it on, and I can use it just fine. But then there are other times where I have to turn it off and on in order to get it to work. And then there are those times where turning it off and on don't help. I usually give up and try again later. Sometimes it'll still give that error message, and other times, it will just work like normal. What can

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Nikon COOLPIX S6 Digital Camera

Lens error I have a Canon Powershoot SD1000 and it was working fine until one day the lens stopped retracting. Now it doesn't retract and I get a Lens Error, Restart Camera message. I looked at other websites to get help and tried some of the ways they suggest to fix it. Not sure if its working, because it still gives the same message and makes a noise sounding like its trying to retract then gives me the Canon welcome picture. I've only had this for a little over a year and would like it to be

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon IXUS V2 Digital Camera

Loaded software, but when I connect camera, the computer gives an error message "failed to initialize the program". Can't get any further. Thanks.

Usually, it's a good idea to restart your computer after installing a new program. Did you do that? ... Canon PowerShot SD1100 IS Digital Camera

Card error When I switch on the power I get a message to either switch off power or format the card. I press OK to format the card and then get a message of card error

If you get a message as "Memory Card Error" on your camera AND you still need some of the photos , the first step is to format the card through the camera menu (Note: if you have an sD card, once you re-format your card any photos cannot be recovere ... Olympus SP-700 Digital Camera

Error Message Hello! Every time I turn My Sony camera on it starts beeping and and giving me the error message "Turn the power off and on again." I've tried turning it off and back on, along with taking the battery out and putting it back in and even pressing the reset button and I'm still continuing to get the same error message. Any ideas on what I can try next?

I have the same problem ... Sony Cyber-Shot DSC-L1 Digital Camera

Had problems loading the card into my Canon SLR EOS 400D. Must have put too much pressure on it as, once loaded, now gives error message

Usually this is caused by putting the card in sideways. you can usually see if pins are bent or pushed through (loose floating around inside) and you see an empty black rectangle where the pin should be.pins are soldered to main circuit, and ... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

Error Message When I take a photo with Nikon D60 it's as though the shutter gets stuck and it gives an error message on the screen (Error! Press shutter release button again.) The top half of the photos are completely black. Also, there have been a couple of times during this problem that the shutter clicks and when looking through the viewfinder everything appears tinted. Weird, I know! Any ideas or suggestions?

Try to take off the battery and reset the camera. You can also try to remove the lens and check the mirror opening..see if there is some thing stuck there. You can try to click the shutter while the lens is removed. If this procedure didn't work I su ... Nikon D60 Digital Camera with 18-55mm lens

I am trying to use my Olympus D-460 after not using it for ~ 4 years. I downloaded the pictures from the 16 MB card using my laptop with a card reader. I then emptied the card. When I pull back the lens cover, the lens comes out but then i get an error message that the card is full. I followed the directions for formatting the card but still get a message that the card is full even though it also gives me a no picture message. i copied some of the original pictures back on to the card and can v

Glad to hear you're back in business! ... Olympus D-460 Zoom Digital Camera

I have loaded the software from disc supplied with my webcam 9000 but keep getting told that upgrades are required when I start my computer. If I say yes upgrade deletes software already installed gets halfway through loading them I get a message error 1702 a problem with the windows installer package requiring a script. Then left high and dry and have to reload the disc.

Completely uninstall everything associated with the initial install of the camera, might require going into the registry and looking for any instance of the camera. Before you try reinstalling, make sure you have the most recent version of explorer a ... Digital Cameras

Olympus D-435 Our camera has been working fine until last week when we started getting this error message - memory full on a blue screen when we had taken only one photo (and deleted all previous photos). Thinking there was a problem with the memory card, we removed it and used only the camera's internal memory which worked for a short while - allowing us to take 12 shots - but now it will only let us take 1 shot before giving us the error message. Is there anything I can do? Many thanks

You can try updating the firmware of the camera since this is not a problem with the memory card its with the camera itself you can check Olympus web site for software update on this.Hope that helps....... ... Digital Cameras

Card error I have a e-1. Two memory cards with 1 and 2 gb. I get a "card error" message when I insert either into the camera. I brought it to one camera shop. They said that a couple of the pins (that connect the memory card to the brains of the camera) were bent. Recently took it to another repair shop and he inserted a card with less memory and the camera worked. Is it the cards or the camera? Will the camera work (with bent pins or whatever) if I get a new memory card?

1. Ensure batteries are fully charged.\015\0122. Look carefully between the lens and the camera body for any sand, dirt or any damaged etc.\015\0123. Try turning the camera with the lens facing down and shake to dislodge anything stuck ... Olympus E-1 Digital Camera

I get a Camera Error message for no apparent reason. It appears on either lens at random times. I bought the camera new in September, and it worked fine until about a month ago. Sometimes I turn the camera off for awhile and then when i restart i get a couple of exposures then it reverts to the camera error thing.

There are numerous things that can cause a lens error, and none of them good. The camera is almost new and shouldn't be experiencing any of these messages. You should contact Sony support and see what can be done. Here is their support site: ... Sony Alpha DSLR-A230 Digital Camera

I have installed the software for cannon power shot A80. when I try to down load I get a "No camera was foud" error message! I have tried rebooting but still get the same error everytime.

Do what the pros do...use a card reader. ... Digital Cameras

I can not down load my Canon 5d Mark 11 camera images onto the computer. I get an error message of /parivate/var/tmp/folders.501/temporaryitems/photo/MG_6728.cr2 How do I get around this message?

Not a solution to this problem but a workaround would be to use a SD card reader(available in most desktop computer or laptops). Yo will have to take out the memory card(SD card) from the camera before doing this. Hope this helps. ... Digital Cameras

Hi I have a Sont Cyber-Shoot DSC-T10 camera but it keeps giving me a E:62:10 error message please tell me how to get rid of it. ps there dorsn't seem to be a fault with the camera apart from the error message Many thanks

A letter and number error code of E:61:xx , E:62:xx , or E:91:xx is an indication a malfunction has occurred in the camera. To try resolving any of these error codes, ... Sony Cyber-shot DSC-T10 Digital Camera

I just bought an SD card and put it in....I get an "Error" message. I asked a rep at Wal-Mart what she thought it could be. She said that the card was too big. I'm not sure what she meant by that.I bought the same type of card that was in it. It was also giving me the "Error" message with the prior card.

Your camera is able to take SD cards up to 2gb and SDHC cards up to 4GB. The error message may just be that the camera needs you to format the card in the camera. ... Samsung Digimax S730 Digital Camera

My Sony DSC S40 Digital Camera is giving problem. I purchased the camera on Sept 2005. Lately i am getting format error. Whenever I click photos I am not able to get my half of the photos. When I try to connect the PC and transfer the pics, message displays file is corrupted and when i disconnet the cam and try viewing it on the camera then format error. My valuable pics have been lost. Please help !!!

When you disconnect from the computer, do you use the "safely remove hardware" icon at the bottom right of your screen or do you just yank out the cord? When you yank, most of the time you will corrupt the card and even the camera. You can try to dow ... Sony Cyber-Shot DSC-S40 Digital Camera

I have a fujifilm a235 and have tried 3 SD cards in the camera, the camera says card error to everyone of the cards. I have formatted all the cards in the camera, and the cards work ok in a different camera but cant get the camera to work. This has happened quite a few times with the camera, has spells of working ok and then either has message, card error or read error. I sent the camera back to yourselves last year for this problem and it was returned that no fault was found. The camera did

... FUJIFILM Finepix A235 Digital Camera

Error #B03 When i load the batteries, i get the error message - camera error #B03 - Consult manual for details. How can i solve this problem?

According to the manual(page 52 on this site, and around 45 in the manual itself), when ever such an error repeatedly apears, you must contact a Kodak rep.\015\012\015\012Since its batteries that bring up this message i would suggest the obvious of c ... Kodak EasyShare CX7430 Digital Camera

I have a cannon zr90 digital camcorder when i load a tape to begin recording i get a message that reads: REMOVE THE TAPE not sure what i am doing wrong can not find my owners manual, any suggestions?

You can download the user manual for the Camcorder from the link given below: ... Digital Cameras

Memory card error - After taking about 300 pictures on a 2 Gig Kodak SD memory card. I get a message on my Canon camera that says '' memory card error'' I tried to put the chip in a differant camera but it tells me to '' Format The Card'' I am afraid if I do that I will loose all of my pictures. I tried to load the pictures into my computer the way I always do and nothing happens. Any helpful ideas ? Thank You

Take no more pics until you've recovered the photos, take the card out of the camera. Here's some freeware photo recovery software th ... Canon Digital Cameras

I am attempting to use "Eye-Fi" connect /x2 with my canon 5d. Since my camera accepts CF cards I am using the SDHC EYE-FI card in a SD/SDHC CF ADAPTER. (SDCF-01). When I insert the SDGC Eye-Fi card into the adapter and load ithem into my 5D, the camera first seems not to be reading the card and then gives message, "Card not formatted". When I attempt to format the card in my 5D, I get the message "Cannot format card". I formatted the card in my computer and again tried to use it but the messa

... Canon EOS 40D Digital Camera

Model JVC GRSXM930 camcorder will not play or rewind tape. Error message - Safe Mode, remove battery and replace. Notice tape gets eaten by unit. Is it a reasonable fix for a reasonable price?

... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3504 seconds