Having problems with your Digital Cameras ?

SONY CYBER SHOT MODEL DSC W-180. TURN THE POWER POWER OFF AND ON AGAIN MSG DISPLAYED AS SOON AS THE CAMERA ON IN STILL & VIDEO MODE. WANT SOLUTION


Answers :

\012

Hi,
\012\012

The\012message appears when the Camera is having some Internal malfunction. If the\012message re appear after turning off and on, try power resetting the Camera.
\012\012

Performing\012a manual power reset
\012\012

· Turn\012off the camera.
\012\012

· Remove\012the battery pack.
\012\012

· Press\012and hold the power button for 30 seconds.
\012\012

· Allow\012the camera to remain without power for 60 seconds.
\012\012

· Reinsert\012the battery pack.
\012\012

· Turn\012on the camera.
\012\012

To reset\012the Camera back to factory default, select the INITIALIZE Option from\012MENU>>SETTINGS>>INITIALIZE>>OK. Reset the camera to factory default\012to check if the issue can be resolved.
\012\012


\012\012

If the\012issue is still unresolved, service will be required.
\012\012


\012\012

Thanks,
\012\012

KenSolutions
\012\012

FixYa

Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

SONY CYBER SHOT MODEL DSC W-180. TURN THE POWER POWER OFF AND ON AGAIN MSG DISPLAYED AS SOON AS THE CAMERA ON IN STILL & VIDEO MODE. WANT SOLUTION


\012Hi, \012\012The\012message appears when the Camera is having some Internal malfunction. If the\012message re appear after turning off and on, try power resetting the Camera.\012\012Performin ... Digital Cameras

Sanyo Xacti VPC-HD1 The display screen is completely black when in record mode; both for still pictures and video mode - yes the lens cap is off. The camera display will play back images and video previously stored on the memory card, but does not display anything new that I have tried to capture since the problem occured.


... Sanyo Digital Cameras

Camera digital display is not activated when the mode is in Photo or Video. It shows only black with some icons.But the digital display is functional when i am in Function set or Menu mode. This camera is just new, Would you provide me good solution?


It would seem that the pickup sensor may be defective. Since camera is new, it should be under warranty. ... Canon PowerShot SD790 IS/ IXUS 90 IS Digital Camera

My Canon Powershot SD1000 acts like it shuts off when I try to upload pics to my computer. When I plug the usb into the computer and the camera into the usb the Camera will still work perfectly fine in picture and video mode, but when I put it in the mode to view my pictures because once I do that the computer dectects the camera to open the program to transfer the pictures the screen goes blank before my computer can detect it and it looks like it shuts off, but thje green power light is


Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer ... Canon PowerShot SD1000 Digital Camera

The sound on my camera does not work. i have gone into settings and it says that silent mode is off but still no sound. it also says hold down the display button to deactivate silent mode and when i do this still no sound. there is now no sound in my videos that i took either.


Have you got the playback volume turned up to full in the set-up menu options? Page 89 of the pdf manual.If you have no sound 'effects' at all like shutter sound it does sound as though there may be a fault but only if you're sure silent mode is off. ... FUJIFILM FinePix Z70 Z71 Digital Camera

Camera was on, working fine. When powering off, telescoping lens did not retract so lens remained extended just a bit with lens cover open. Waited a few minutes, turned it back on and I get the "access" display message then the beeps and (turn power off and back on) message. While off, I have removed the battery, replacing it with a fully charged spare and it still does this. The lens tries to telescope a little bit and retracts a touch, but I can't get the camera out of this mode. Can it be res


Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Sony Cyber-shot DSC-W55 Digital Camera

I have canon power shot A 720 IS. Its been fine for 2 years. suddenly it stopped displaying in the LCD screen. But i can take pictures by looking through the view finder. Also, the LCD display works when in the video mode and photo stitch mode. please let me know the solution. Thanks.


Maybe the display was turned OFF. Check it and turn it ON. If still in problems, look for a specialized service to check you camera. ... Canon Digital Cameras

Power/lens Problems I'm having some power/lens problems with my camera. When I turn on the power in either the picture or video mode, the green light will turn on for a split second then turn off. The lens does not come out at all. However, when I try to turn it on with the picture viewer or in the menu it works just fine. When I start with the picture viewer and then switch to the camera it turns off. Thus it seems that whenever I want to take a picture or a movie the camera doesn't work.


It seems that the lense movement is jammed. Have you dropped the camera? just have a close look from the front side of the camera, does the lense assembly seems to be pressed or moved aside by some extra preassure? if no physical disalingment is vi ... Sony Cyber-Shot DSC-P72 Digital Camera

I have an canon power shot A85. The image taken by it is so blur. We thought it may be the display issue, however the old picture saved in the card are still sharp. The camera can still be used to take video, and the quality is good. Is this due to the setting, since kids have played it more than 6 months. Thank you.


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free worldwide, and may also include free shipping both ways (free shipping varies with countries). This is regardless of your camera's warranty status. ... Canon PowerShot A85 Digital Camera

Hi welcomejee, I read all your solutions regarding the digital camera Sony DSC N2. I really have to thank you for your precious Some of the problems are very similar to mine: After the camera fell on the ground from about 2 meters in off mode the lens would come out and immediately back in 4 times in a row. After that the lens is back in, a beeping sound comes up and on the display it is written to "Turn the power off and on again". Of course that does not help at all. The lens is opening


George, this is most likely a lens issue, and more precisely, probably a stripped gear when it fell. You will have to disassemble the entire unit to get at the lens assembly, and will probably be a professional by the time you get through! ... Digital Cameras

I've got a tasco trail camera and I'm having trouble with the still shot mode. The video mode works fine, but the still shot mode does not. When I have the camera on still shot mode, it will take a picture and then shut off. The camera won't stay on without me having to turn it back on. Has anyone out there encountered this problem before? Thanks for your help.


... Digital Cameras

I have 1735 pink polaroid >stuck in video mode


... Digital Cameras

JVC GZ MG77aa problem: When i turn my video camera on it works in picture mode but as soon as i turn it over to video mode a screen pops up sayin "communicating" [with a picture of arrors pointing to a video camera logo and then to the battery logo,] i have checked the battery at a JVC store and it has been checked and everything is fine with that, its just weird it works in picture mode and not video mode anymore it just keeps showing that "commutating' logo and restarting and does the same thi


This sounds like the software that initiates the video is amiss, and the camera can't initialize the video function. If so, the main board has to be replaced to fix it.\015\012However, just to check, make sure the battery contacts inside the ... Digital Cameras

My camera problem is :when i start or turn on the power button of camera a massage is displayed which is "Turn off the power and on again " i followed the same but again when i am turning the power on again ,same massage is being displayed in camera . camera model is :SONY DSC-W180 cyber shot please help me out soon.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sony Cyber-shot DSC-W180 Digital Camera

I've recently noticed a wide dark horizontal line approx 1/4 of the way down from the top of my screen display. The camera is kept in my home office, has not been dropped, gotten wet or exposed to extreme temps or humidity. The still photos come out fine but the videos I take have the line going through them. I played with it this evening and notice that the line moves down to about 1/4 of the way up from the bottom of the screen when I press the shutter in picture mode and stays there while


... Canon PowerShot A95 Digital Camera

My canon powershot only powers on in playback mode. when i try to power up in camera or video mode, the camera's lens tries to retract but only for a split second and always returns . I have bo video or audio CAPTURE only turns on for playback.. I do not wish to purchiss another camere and Id like to use my 4 GIG


... Digital Cameras

I can only turn on my Cybershot DSC-N2 while the camera is in playback mode. I can look at the pictures and videos and change settings with no problem.. but when I try to switch to camera or video record mode the camera turns off by itself. Sometimes the lens will come out and then the camera powers down with the lens stuck out. Other times it just shuts off before the lens even has a chance to come out. The camera has never been dropped or damaged.


First press power button for 15 seconds .Then remove memory card from it may be your memory card has some issue.also press reeset button on camera some camera has reset button.start your camera without memory card. ... Digital Cameras

Camera was dropped in water for just seconds. It won't change between modes: play, video rec, and still shot. It is constantly in still shot mode. The battery dies quickly. I bought a new battery and it still dies quickly. Pictures taken have vertical lines and often are whited out. Anything I can do to fix this? Would it be better to buy another camera or have this one fixed?


Water has got inside the camera and is causing the problems you have stated.\015\012The battery is discharging quickly due to the water damage and the pictures you are able to still take have symptoms of over exposure, most likely caused by wat ... Fuji FinePix F450 Digital Camera

A still picture has been taken(by mistake) and is being displayed through the projector. I am unable to get rid of the still picture. It toggles over to the computer but when I toggle back it still only displays the still picture. How do I remove this snapshot from being displayed and be able to display the camera mode?


... Avermedia AVerVision CP300 Digital Camera

Sony dsc-13 I have sony dsc-13 digital camera and suddenly after switching it on in picture mode and video mode the data(day nd time,flash....etc) appears on a black background on the lcd though the lens door is open and i can see my previouly stored pics in the camera lcd and also in my computer after connecting through usb.. so the problem is i take black pics and videos while the lens is open and the charger attached or on full battery,and the new taken pics displays black as well


Basically it is a Japanese Model from where u bought it u are lucky u can\015\012get it free of charge replacement just tell me which region u belong\015\012there is a known issue of CCD failure u will get free of charge repairs\015\012fo ... Sony Cyber-Shot DSC-T3 Digital Camera

Sony DSC-T1 Still shots are washedout...almost completely white. But video recording works ok. I have checked every setting (0EV, Multi AF Focus, Multi Metering, Auto WB,OFF PFX, and default camera setup). Viewfinder/display is good, resulting image is nearly completely white....like the white balance is whacked.... I set camera in video and recorded ok....no distortion or other problems. Problem Only seems to be in still shot mode.


Its's problem of ccd imager in your DSC-T1 camera and that part will be replaced.Sony announced free of cost repair for subject problem. Click ... Sony Cyber-Shot DSC-T1 Digital Camera

I am having power supply and lens problem with a canon sd1000 digital camera. its not working with the battery inside and the lens got stuck and was not closing and now it is open but the camera is off and the lens is also extended the battery is fully charged and functional but still is not powering the camera back on. i currtently took the outer casing off and attempting to navigate through the boards looking for a solution to the power supply and then the lens error of bein stuck problems.


I am afraid you have the notorious lens stuck problem. If you google "canon lens stuck" or "canon lens not retracing" the results will be in millions. Canon's quote for repairing this issue is well over the cost of the camera itself. However all is n ... Canon PowerShot SD1000 Digital Camera

I am having power supply and lens problem with a canon sd1000 digital camera. its not working with the battery inside and the lens got stuck and was not closing and now it is open but the camera is off and the lens is also extended the battery is fully charged and functional but still is not powering the camera back on. i currtently took the outer casing off and attempting to navigate through the boards looking for a solution to the power supply and then the lens error of bein stuck problems.


This is a mechanical fault and would only be repaired through servicing. You should be able to get it repaired under warranty or a camera centre. If the costs are too high it may just be worth replacing the camera. ... Digital Cameras

I am having power supply and lens problem with a canon sd1000 digital camera. its not working with the battery inside and the lens got stuck and was not closing and now it is open but the camera is off and the lens is also extended the battery is fully charged and functional but still is not powering the camera back on. i currtently took the outer casing off and attempting to navigate through the boards looking for a solution to the power supply and then the lens error of bein stuck problems.


This is a mechanical fault and would only be repaired through servicing. You should be able to get it repaired under warranty or a camera centre. If the costs are too high it may just be worth replacing the camera. ... Canon PowerShot SD1000 Digital Camera

Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!


You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5473 seconds