Having problems with your Digital Cameras ?

When starting the videocam suite 3.0 program an error message occurs reading Unhandled exception has occurred in your application Setting manager initialize setting failed I have tried reinstalling the program but this has no effect


Answers :

Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When starting the videocam suite 3.0 program an error message occurs reading Unhandled exception has occurred in your application Setting manager initialize setting failed I have tried reinstalling the program but this has no effect


... Digital Cameras

Reinstalling software When I try to open the Olympus software, I get a message the serial number is missing and I have to reinstall the program. I cannot find a built-in uninstall utility. When I try to delete the folder "Olympus," I'm told it can't be done because a file is being used somewhere. I can't install over the old program and it cancels itself. What should I do? Thank you for your help!


Close down the computer.\015\012Reboot the computer go to Control panel Add/delete software - find the Olympus file and click delete.\015\012When done do not re install, but put the CD back in the box, Windows does very well without it.\015\012If y ... Olympus FE-110 Digital Camera

My computer hardrive crashed and I had a new one installed. I am trying to reinstall the Digimax D53 program. When I do the program says it was installed and the icon is on the desktop, but when I try to operate it I get a message that the program has shut off and I cannot get it to work. HELP !


Hi,Uninstall the program. Then install again.\012\012\012\011\012\011\012Cheers\012TeaCii\012If you own website, add\012live support almost ... Samsung Digimax D53 Digital Camera

Camera is 5 years old, It has been working fine. Batteries had become low and when I put new batteries in the camera switches on. the , the flash open, the viewer window lights up with set time and date option. The program dial shows low battery but I have tried three different sets of batteries. I have left the camera turned on as I write this and after a few minutes the lens does extend but when I tried it again it will no extend immediately as it should.


Make sure the batteries are the correct type and voltage for your camera. Also because of the age you may have corrosion on the battery contacts inside the battery compartment. If this is the case then no matter how many batteries you try they will n ... Digital Cameras

My Vivitar Series 1 24-70 manual focus ais lens won't work on program in my Nikon FA. I bought both new, but have stored them for a long time. It works on aperture priority, shutter priority, and manual, just not in program. All my other lenses do, including other Vivitar lenses, so it must be the lens. Fresh batteries in the camera. I get the FEE message, which means the lens is not set on the smallest aperture, but it IS set on the smallest aperture. I have tried dismounting and remounti


You are correct - the lense should work with the Nikon FA!\015\012It sounds like there is a communication problem, and the lense is in need of repair.\015\012Your local camera shop should be able to take care of it. The repair should be l ... Digital Cameras

Over exposure The exposure settings on the camera have suddenly become fixed - I can't change them either through fixing shutter speed, OEV, or any other settings. Even tried a factory reset by selecting 'initialize' from the menu, but the problem persists. High or low exposure settings are visible on the viewfinder (i.e. changing the settings shows the picture getting darker or lighter on the screen), but once the picture is shot, it's fixed at an overexposed state.


... Sony Cyber-Shot DSC-HX7V Digital Camera

I have a DSC-T10 and the screen does not display any of the menu features. It is has vertical lines across the screen. I would try to initialize it using the set-up menu but can't access it. It is not under warranty and costs to much to send it in for repair...any ideas of what I could try? I did try to reset by holding down the power button for 15 seconds while battery is out but nothing changed.


Hi,There could be 2 Reasons :-1. Bad CCD Sensor 2. \015\012Bad PanelTo Differentiate, Try to Look the Saved images or the \015\012Saved Video's. If you could see them without any Problem, CCD Sensor is \015\0 ... Sony Cyber-shot DSC-T10 Digital Camera

I recently attempted to install a Genius FaceCam 1000 web camera on my Dell E520 running Windows Vista SP2 with a Kaspersky based AV program. I cannot get any sound from the device.I have tried the camera in Windows Messenger, Google, Yahoo, and Skype. When I test the sound setting I get no volume bars in the test window. I have replaced the camera thinking it may be a problem with the original unit. I have tried running the device using Line 1 (CamSuite Virtual Audio), I have tried running the


... Digital Cameras

Intermittently, I get a scene in the viewfinder which is just a mass of streaks of various colors. I tried snapping the photo anyway, and that's also what came out as the image. Camera was set on "Auto". Sometimes when I gave up in disgust, the camera would work the next day, sometimes all day, sometimes only for a while. I tried fresh batteries (though I had no low battery warning) and also tried reseating the memory sD card, all to no effect. This is an S7000, about 7-8 years old, with no pri


A capacitor in the circuitry has failed producing the results you are getting.. The cost to repair outweighs the cost of a new replacement camera ... Fuji FinePix S7000 Digital Camera

My xd-picturecard is not working in camera saying that card is not initialized My memory card worked fine the first time I took pictures with it, but after taking it out to upload them and then replacing it, I get a message on the screen caying CARD NOT INITIALIZED, and it will not take pictures. I have tried sliding the yellow tab on the left of the card, but it has no effect.


DI PRO:\015\012Thank you for the information, I did format the camera disk, however, although I'm able to see the image now and shoot the picture, when I shoot it I get an "Write Error", \015\012\015\012I thank you for your ... Fuji Finepix F50FD Digital Camera

Monitor unlit I'm using my colleges D40 for my digital photo class. The camera was set by a prior student. I'm trying to find on the camera where the "Auto- Off Timers" is. I'm thinking the camera was set so the monitor is always off avoiding extra use of the battery. It has to be something simple and getting used to moving around the camera program. Thanks


The best thing to do would be to press the 2 green dots together to do a master reset on the camera. 1st green dot would be just beside the shutter and the other would be on the left of the lcd. press and hold them both for about 10 secs ... Nikon D40 Digital Camera with G-II 18-55mm Lens

I have a Coolpix Nikon L1 and everything works fine with the camera except when I try to transfer the pictures over to the computer. It used to let me but I would still have to run them through other programs because it never automatically comes up like it used it. I have already tried going through the set-up menu on the camera and did everything it told me to and it still does not work. Any solutions?


If you're using the software provided, there may be settings for automatic download. Check the pc settings of the software you're using. ... Nikon Coolpix L1 Digital Camera

When turning off my D90 I have on the control panel showing ISO 1.0 in parenthesis and the letter K to the upper right of the 1.0 this remains on when the camera is turned off. I have tried everything that has to do with this setting and cannot get it to go away when turned off. Pulling the battery is the only option so far even going back to default settings has no effect....help


I'm assuming it's actually on the lower right corner. It's supposed to stay on, even with the camera turned off. All it's doing is telling you that the memory card still has room for a thousand more pictures.The power drain is so minimal ... Nikon DSLR D90 Digital Camera

I have installed the olympus disc Camedia for a C-740 camera in a new computer. When I try to download pictures the computer cannot see the camera. THe same files work fine in the old computer. I Have tried removing and reinstalling the program.


The software is not compatible with vista... it will work, you just have to transfer from media and choose your removable disk drive that represents your camera ... Olympus Digital Cameras

Hello. I'm trying to install my pictures from my camera to computer. I've never had problems in the past, but now it's saying "camera is not recognized". I've tried unplugging the usb cord, turning the camera and computer on and off, reinstalling the program, changing the batteries, putting the memory card directly into the computer (which does not pull up any options or do anything). Please help! Thanks in advance.


Time to start using a card reader for downloads. ... Canon PowerShot A530 Digital Camera

I have a camera Canon A590is, that is not being recognize by the laptop. In the device manager the "Canon Digital Camera" has a yellow marker. After trying to reinstall the driver, a error message "Cannot install this hardware" apperars along with "The Data is invalid" What can I do to fix this problem. Already trie dby reinstalling the camera SW (Zoom browser...) Thank you, Milton


You didn't say what operating system you are using in your PC. If you have Windows XP or later follow these instructions. Since you apparently have the driver and software on a CD, unplug the camera from your PC, remove the camera software from the P ... Canon PowerShot A590 IS Digital Camera

Movie Maker I can't import my video files into Windows MovieMaker - it just shuts down everytime I try. I have tried everything suggested on the Windows help site with no success (downloaded codecs, reinstalled the program, converted the video files). I am very frustrated!! I can take videos, load them on my computer, but can't edit with MovieMaker - is it something with the camera or the video fliles????


Please call Jazz Products @ 732-572-7050 ... Jazz DV-179 Digital Camera

My Canon ixus55 was downloading from camera to computer with no hassles and then stopped all of a sudden? Done nothing different I use the canon zoombrowser program provided by canon for download. I tried uninstalling and then reinstalling the software now that does not fully install as well. Any assistance is much appreciated. I had this issue earlier this year after I had a windows update done so had to reinstall the camera software and then it worked but that s a huge job and no window update


... Digital Cameras

Vivicam 5386 ive had the camera for a while & just recently when i tried getting the pictures off of it to my pc, it stoped working. The screen no longer turns black when i plug it in&& the screen to download images, doesnt come up anymore. I've tried everything from making sure its set to pc to reinstalling the driver. please help me i dont want to return the camera!


It sound like the USB jack has a broken connection inside your camera. You should be able to purchase a Card Reader and then just remove your memory chip from the camera and use the Card Reader to transfer your pictures to the computer. I doubt tha ... Vivitar ViviCam 5386 Digital Camera

I set my Canon 50d to take large RAW files (cr2) and it is not recognizing them in adobe photoshot cs3. I have tried switching out the card and the same thing happens, i have tried different computers, same thing. However the Canon Utility program that came with the camera recognizes the images however cannot edit them the way you can in photoshop, (so i might as well shoot jpeg) my question is..., is this an internal problem with the camera? it just doesnt make sense?


The plug in is avail for cs3 but not cs2 you will have to use the canon photo editor software if you have cs2. ... Canon Digital Cameras

I have a panasonic SDR 1140 I have problems editing video data and the Panasonic assistance team told me to uninstall and reinstall the software. each time i try to on both my PCs it saya that it cannot do it because there is a more sophisticated program already installed. i removed everything I had my Media Player Codec, from this PC I am using and it didn't help. When I tried to install it into my other PC which has hardly anything on it I got the same message. It is not the first time this me


Hi.\015\012\015\012\015\012The more recent version of the driver software is probably Windows default driver installed when you connected the camcorder USB before installing drivers from disk.\015\012\015\012\015\012If you hav ... Panasonic Digital Cameras

Need help Hi i have a Largan Chamelon Mega and I have the program download like i am suppose to but when i plug the camera in to my oc to get the pics I get a error message of Device Not ready ??? I dont understand why its doing this it has never done it before ...I have tried to uninstall the program and reinstall it but that hasnt helped any assistance would be great


If your computer is a Windows ME/2000/XP/Vista it does not need any additional software.Remove any camera associated software and simply plug the camera in- The Camera/Scanner Wizard will come up and ask what it is you want to do.Let Wind ... Digital Cameras

When i turn on the camera the lens wont pop open even when the battery is fully charged.... i was taking pictures and it working fine turn the camera off and on again then the lens wont open anymore? i can still view all the pictures i took from the camera but cannot take pictures anymore coz of the lens wont open. i tried initializing the camera by going to set up it didnt work..msg error said turn the camera off and on again and i did but didnt work either many times i tried please help thnks!


The problem is\015\0121- some dirt somehow got on the outside of the lense. After it was retracted fully in, it prevents the camera from opening again. When you turn it on, if it opens a little bit, try to pull it out NOT too hard and let go ... Sony Cyber-shot DSC-N2 Digital Camera

Lost images After I clicked the "low format" setting in the memory card settings menu all my photos disappeared.  i have used two photo recovery programs to try and recover my photos. neither worked. any advice?


Formatting a memory card actually deletes all files on that card, including picture files. I am afraid you have loss these file permanetly. sorry ... Canon PowerShot SD1000 Digital Camera

Transferring pictures I am having an issue with transferring pictures from the camera. An error message has come up at the end of the transfer. It says:An error occured while saving images. Check your image capture device connection and try again.By that, it means the USB cord connection. So I have checked that. Then, I tried uninstalling the program and reinstalling. That didn't work either. I don't know what to do.Please help.Thank you.


Hi,A couple of things you can try:1. Insert the Camera's USB cord to another USB port of your PC;2. While disconnected from the PC, verify that the pictures are still inside the camera's memory;3. Reset the camera (power ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2641 seconds